On Fri, Oct 23, 2015 at 1:31 PM, Bjorn Helgaas <helgaas@xxxxxxxxxx> wrote:
> Hi Ley,
>
> On Thu, Oct 22, 2015 at 05:27:28PM +0800, Ley Foon Tan wrote:
>> This patch adds the Altera PCIe host controller driver.
>
>> +static void altera_pcie_fixups(struct pci_bus *bus)
>> +{
>> + struct pci_dev *dev;
>> +
>> + list_for_each_entry(dev, &bus->devices, bus_list) {
>> + altera_pcie_retrain(dev);
>> + altera_pcie_fixup_res(dev);
>> + }
>> +}
>
> I'd really like to avoid this particular fixup because it's done
> between pci_scan_root_bus() and pci_assign_unassigned_bus_resources()
> and pci_bus_add_devices(). That path is almost 100% arch-independent,
> and someday we should be able to pull all that out into one PCI core
> interface.
>
> You might be able to do the link retrain fixup as a header quirk.
> That's not really ideal either, but I don't think we have a good
> mechanism of inserting per-host bridge hooks in the enumeration path.
> There are some pcibios_*() hooks, but those are per-arch, not per-host
> bridge, so they're not really what you want here.
Okay, will change the retrain fixup to use *PCI_FIXUP* macro.
By doing this, we need [PATCH v11 2/6] pci: add Altera PCI vendor ID patch.
>
> I think other host drivers have handled the "prevent enumeration of
> root complex resources" problem by adding a similar check in the
> config accessors.
Okay, will handle this in config accessors.
>
>> +static int altera_pcie_cfg_write(struct pci_bus *bus, unsigned int devfn,
>> + int where, int size, u32 value)
>
> This needs a comment to the effect that this hardware can only generate
> 32-bit config accesses. We also need a printk in the probe routine so
> there's a note in dmesg so we have a clue that RW1C bits in config space
> may be corrupted.
I have checked the PCIe/TLP spec, we can use the "First BE" (byte
enable) field in TLP packet to write
specific bytes only. And I have update driver to support this "First
BE" feature.
So, we don't have corrupted RW1C bit issue now.
>
>> +{
>> + struct altera_pcie *pcie = bus->sysdata;
>> + u32 data32;
>> + u32 shift = 8 * (where & 3);
>> + u8 byte_en;
>> +
>> + if (!altera_pcie_valid_config(pcie, bus, PCI_SLOT(devfn)))
>> + return PCIBIOS_DEVICE_NOT_FOUND;
>> +
>> + switch (size) {
>> + case 1:
>> + data32 = (value & 0xff) << shift;
>> + byte_en = 1 << (where & 3);
>> + break;
>> + case 2:
>> + data32 = (value & 0xffff) << shift;
>> + byte_en = 3 << (where & 3);
>> + break;
>> + default:
>> + data32 = value;
>> + byte_en = 0xf;
>> + break;
>> + }
>> +
>> + return tlp_cfg_dword_write(pcie, bus->number, devfn,
>> + (where & ~DWORD_MASK), byte_en, data32);
>> +}
>
>> +static void altera_pcie_isr(struct irq_desc *desc)
>> +{
>> + struct irq_chip *chip = irq_desc_get_chip(desc);
>> + struct altera_pcie *pcie;
>> + unsigned long status;
>> + u32 bit;
>> + u32 virq;
>> +
>> + chained_irq_enter(chip, desc);
>> + pcie = irq_desc_get_handler_data(desc);
>> +
>> + while ((status = cra_readl(pcie, P2A_INT_STATUS)
>> + & P2A_INT_STS_ALL) != 0) {
>> + for_each_set_bit(bit, &status, INTX_NUM) {
>> + /* clear interrupts */
>> + cra_writel(pcie, 1 << bit, P2A_INT_STATUS);
>> +
>> + virq = irq_find_mapping(pcie->irq_domain, bit + 1);
>> + if (virq)
>> + generic_handle_irq(virq);
>> + else
>> + dev_err(&pcie->pdev->dev, "unexpected IRQ\n");
>
> Include the bit number here. A printk string with no % substitutions
> is rarely as useful as it could be.
Okay.
>
>> ...
>> + bus = pci_scan_root_bus(&pdev->dev, pcie->root_bus_nr, &altera_pcie_ops,
>> + pcie, &pcie->resources);
>> + if (!bus)
>> + return -ENOMEM;
>> +
>> + altera_pcie_fixups(bus);
>> + pci_fixup_irqs(pci_common_swizzle, of_irq_parse_and_map_pci);
>> + pci_assign_unassigned_bus_resources(bus);
>> + pci_bus_add_devices(bus);
>> +
>> + /* Configure PCI Express setting. */
>> + list_for_each_entry(child, &bus->children, node)
>> + pcie_bus_configure_settings(child);
>
> This loop should be before pci_bus_add_devices(). When we call
> pci_bus_add_devices(), drivers may claim devices immediately, and the
> PCI core shouldn't be changing device configuration while a driver
> owns the device.
Okay, will move this before pci_bus_add_devices().
Thanks.
Regards
Ley Foon
--
To unsubscribe from this list: send the line "unsubscribe linux-pci" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
