Re: [PATCH v2 4/4] ARM: dts: imx6q: add Novena board

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 19/01/2015 18:04, Lucas Stach wrote:
> Am Montag, den 22.12.2014, 16:32 +0800 schrieb Sean Cross:
>> Novena is an open-hardware laptop/desktop/bare board.
>>
>> See http://www.kosagi.com/w/index.php?title=Novena_Main_Page
>>
>> This device tree contains additional nodes for FPGA support.
>>
>> Signed-off-by: Sean Cross <xobs@xxxxxxxxxx>
> Some remarks inline. Otherwise looks good to me.

Responses inline.  I can address these issues and submit a v3, minus the
PCIe power switch patch (but with the bus-supply line in the device tree
file.)

>
> Regards,
> Lucas
>
>> ---
>>  arch/arm/boot/dts/Makefile         |   1 +
>>  arch/arm/boot/dts/imx6q-novena.dts | 856 +++++++++++++++++++++++++++++++++++++
>>  2 files changed, 857 insertions(+)
>>  create mode 100644 arch/arm/boot/dts/imx6q-novena.dts
>>
>> diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
>> index 38c89ca..b2b4770 100644
>> --- a/arch/arm/boot/dts/Makefile
>> +++ b/arch/arm/boot/dts/Makefile
>> @@ -234,6 +234,7 @@ dtb-$(CONFIG_ARCH_MXC) += \
>>  	imx6q-gw552x.dtb \
>>  	imx6q-hummingboard.dtb \
>>  	imx6q-nitrogen6x.dtb \
>> +	imx6q-novena.dtb \
>>  	imx6q-phytec-pbab01.dtb \
>>  	imx6q-rex-pro.dtb \
>>  	imx6q-sabreauto.dtb \
>> diff --git a/arch/arm/boot/dts/imx6q-novena.dts b/arch/arm/boot/dts/imx6q-novena.dts
>> new file mode 100644
>> index 0000000..d4a3a06
>> --- /dev/null
>> +++ b/arch/arm/boot/dts/imx6q-novena.dts
>> @@ -0,0 +1,856 @@
>> +/*
>> + * Copyright 2014 Sutajio Ko-Usagi PTE LTD
>> + * Copyright 2012 Freescale Semiconductor, Inc.
>> + * Copyright 2011 Linaro Ltd.
>> + *
>> + * The code contained herein is licensed under the GNU General Public
>> + * License. You may obtain a copy of the GNU General Public License
>> + * Version 2 or later at the following locations:
>> + *
>> + * http://www.opensource.org/licenses/gpl-license.html
>> + * http://www.gnu.org/copyleft/gpl.html
>> + */
>> +
>> +/dts-v1/;
>> +#include "imx6q.dtsi"
>> +#include <dt-bindings/gpio/gpio.h>
>> +#include <dt-bindings/input/input.h>
>> +
>> +/ {
>> +	model = "Kosagi Novena Dual/Quad";
>> +	compatible = "kosagi,imx6q-novena", "fsl,imx6q";
>> +
>> +	memory {
>> +		reg = <0x10000000 0xefffffff>;
>> +	};
>> +
>> +	chosen {
>> +		stdout-path = &uart2;
>> +	};
>> +
>> +	regulators {
>> +		compatible = "simple-bus";
>> +
> I know it is common practice in many DTs, but this "bus" is completely
> unnecessary and we should stop using this pattern for new DTs. Please
> move those regulators directly into the parent node.
Will do.

>
>> +		reg_2p5v: 2p5v {
>> +			compatible = "regulator-fixed";
>> +			regulator-name = "2P5V";
>> +			regulator-min-microvolt = <2500000>;
>> +			regulator-max-microvolt = <2500000>;
>> +			regulator-always-on;
>> +		};
>> +
>> +		reg_3p3v: 3p3v {
>> +			compatible = "regulator-fixed";
>> +			regulator-name = "3P3V";
>> +			regulator-min-microvolt = <3300000>;
>> +			regulator-max-microvolt = <3300000>;
>> +			regulator-always-on;
>> +		};
>> +
>> +		reg_usb_otg_vbus: usb_otg_vbus {
>> +			compatible = "regulator-fixed";
>> +			regulator-name = "usb_otg_vbus";
>> +			regulator-min-microvolt = <5000000>;
>> +			regulator-max-microvolt = <5000000>;
>> +			enable-active-high;
>> +		};
>> +
>> +		reg_audio_codec: es8328-regulator {
>> +			compatible = "regulator-fixed";
>> +			regulator-name = "es8328-power";
>> +			regulator-boot-on;
>> +			regulator-min-microvolt = <5000000>;
>> +			regulator-max-microvolt = <5000000>;
>> +			startup-delay-us = <400000>;
>> +			gpio = <&gpio5 17 GPIO_ACTIVE_HIGH>;
>> +			enable-active-high;
>> +		};
>> +
>> +		reg_pcie: pcie-regulator {
>> +			compatible = "regulator-fixed";
>> +			regulator-name = "pcie-bus-power";
>> +			regulator-min-microvolt = <1500000>;
>> +			regulator-max-microvolt = <1500000>;
>> +			gpio = <&gpio7 12 GPIO_ACTIVE_HIGH>;
>> +			enable-active-high;
>> +		};
>> +
>> +		reg_lvds_lcd: lcd-regulator {
>> +			compatible = "regulator-fixed";
>> +			regulator-name = "lcd-lvds-power";
>> +			regulator-min-microvolt = <3300000>;
>> +			regulator-max-microvolt = <3300000>;
>> +			gpio = <&gpio4 15 GPIO_ACTIVE_HIGH>;
>> +			enable-active-high;
>> +		};
>> +
>> +		reg_display: display-regulator {
>> +			compatible = "regulator-fixed";
>> +			regulator-name = "lcd-display-power";
>> +			regulator-min-microvolt = <3300000>;
>> +			regulator-max-microvolt = <3300000>;
>> +			startup-delay-us = <200000>;
>> +			gpio = <&gpio5 28 GPIO_ACTIVE_HIGH>;
>> +			enable-active-high;
>> +		};
>> +
>> +		reg_sata: sata-regulator {
>> +			compatible = "regulator-fixed";
>> +			regulator-name = "sata-power";
>> +			regulator-boot-on;
>> +			regulator-min-microvolt = <3300000>;
>> +			regulator-max-microvolt = <3300000>;
>> +			startup-delay-us = <10000>;
>> +			gpio = <&gpio3 30 GPIO_ACTIVE_HIGH>;
>> +			enable-active-high;
>> +		};
>> +	};
>> +
>> +	gpio-keys {
>> +		compatible = "gpio-keys";
>> +		pinctrl-names = "default";
>> +		pinctrl-0 = <&pinctrl_gpio_keys_novena>;
>> +
>> +		user-button {
>> +			label = "User Button";
>> +			gpios = <&gpio4 14 GPIO_ACTIVE_LOW>;
>> +			linux,code = <KEY_POWER>;
>> +		};
>> +
>> +		lid {
>> +			label = "Lid";
>> +			gpios = <&gpio4 12 GPIO_ACTIVE_LOW>;
>> +			linux,input-type = <5>; /* EV_SW */
>> +			linux,code = <0>; /* SW_LID */
>> +		};
>> +	};
>> +
>> +	leds {
>> +		compatible = "gpio-leds";
>> +		pinctrl-names = "default";
>> +		pinctrl-0 = <&pinctrl_leds_novena>;
>> +
>> +		heartbeat {
>> +			label = "novena:white:panel";
>> +			gpios = <&gpio1 21 GPIO_ACTIVE_HIGH>;
>> +			linux,default-trigger = "default-on";
>> +		};
>> +	};
>> +
>> +	backlight: backlight {
>> +		compatible = "pwm-backlight";
>> +		pwms = <&pwm1 0 10000000>;
>> +
>> +		pinctrl-names = "default";
>> +		pinctrl-0 = <&pinctrl_backlight_novena>;
>> +		power-supply = <&reg_lvds_lcd>;
>> +
>> +		brightness-levels = <0 3 6 12 16 24 32 48 64 96 128 192 255>;
>> +		default-brightness-level = <12>;
>> +	};
>> +
>> +	panel: panel {
>> +		compatible = "innolux,n133hse-ea1", "simple-panel";
>> +		backlight = <&backlight>;
>> +	};
>> +
>> +	sound {
>> +		compatible = "fsl,imx-audio-es8328";
>> +		model = "imx-audio-es8328";
>> +		ssi-controller = <&ssi1>;
>> +		audio-codec = <&codec>;
>> +		audio-amp-supply = <&reg_audio_codec>;
>> +		jack-gpio = <&gpio5 15 GPIO_ACTIVE_HIGH>;
>> +		audio-routing = 
>> +			"Speaker", "LOUT2",
>> +			"Speaker", "ROUT2",
>> +			"Speaker", "audio-amp",
>> +			"Headphone", "ROUT1",
>> +			"Headphone", "LOUT1",
>> +			"LINPUT1", "Mic Jack",
>> +			"RINPUT1", "Mic Jack",
>> +			"Mic Jack", "Mic Bias";
>> +		mux-int-port = <0x1>;
>> +		mux-ext-port = <0x3>;
>> +	};
>> +};
>> +
>> +&audmux {
>> +	pinctrl-names = "default";
>> +	pinctrl-0 = <&pinctrl_audmux_novena>;
>> +	status = "okay";
>> +};
>> +
>> +&fec {
>> +	pinctrl-names = "default";
>> +	pinctrl-0 = <&pinctrl_enet_novena>;
>> +	phy-mode = "rgmii";
>> +	phy-reset-gpios = <&gpio3 23 GPIO_ACTIVE_HIGH>;
>> +	mac-address = [00 00 00 00 00 00];
>> +	rxc-skew-ps = <3000>;
>> +	rxdv-skew-ps = <0>;
>> +	txc-skew-ps = <3000>;
>> +	txen-skew-ps = <0>;
>> +	rxd0-skew-ps = <0>;
>> +	rxd1-skew-ps = <0>;
>> +	rxd2-skew-ps = <0>;
>> +	rxd3-skew-ps = <0>;
>> +	txd0-skew-ps = <3000>;
>> +	txd1-skew-ps = <3000>;
>> +	txd2-skew-ps = <3000>;
>> +	txd3-skew-ps = <3000>;
>> +	status = "okay";
>> +};
>> +
>> +&ecspi3 {
>> +	pinctrl-names = "default";
>> +	pinctrl-0 = <&pinctrl_ecspi3_novena>;
>> +	fsl,spi-num-chipselects = <3>;
>> +	status = "okay";
>> +
>> +	spidev@0 {
>> +		compatible = "spidev";
>> +		spi-max-frequency = <30000000>;
>> +		reg = <0>;
>> +	};
>> +};
>> +
>> +&hdmi {
>> +	pinctrl-names = "default";
>> +	pinctrl-0 = <&pinctrl_hdmi_novena>;
>> +	ddc-i2c-bus = <&i2c2>;
>> +	status = "okay";
>> +};
>> +
>> +&i2c1 {
>> +	pinctrl-names = "default";
>> +	pinctrl-0 = <&pinctrl_i2c1_novena>;
>> +	status = "okay";
>> +
>> +	sbs_battery: bq20z75@0b {
>> +		compatible = "sbs,sbs-battery";
>> +		reg = <0x0b>;
>> +		sbs,i2c-retry-count = <50>;
>> +	};
>> +
>> +	senoko: senoko@20 {
>> +		pinctrl-names = "default";
>> +		pinctrl-0 = <&pinctrl_senoko_novena>;
>> +		compatible = "kosagi,senoko";
> This is missing a binding documentation.
This is the power supply board.  I have an set of
MFD/input/regulator/RTC devices that I will push at a later time.  Would
the correct approach be to remove this node for now, and add it back in
when that driver is pushed?
>> +		reg = <0x20>;
>> +		irq-gpio = <&gpio1 20 GPIO_ACTIVE_HIGH>;
>> +		supplied-to = "sbs-0-000b";
>> +	};
>> +
>> +	stmpe811@44 {
>> +		compatible = "st,stmpe811";
>> +		#address-cells = <1>;
>> +		#size-cells = <0>;
>> +		reg = <0x44>;
>> +		irq-gpio = <&gpio5 13 GPIO_ACTIVE_HIGH>;
>> +		id = <0>;
>> +		blocks = <0x5>;
>> +		irq-trigger = <0x1>;
>> +		pinctrl-names = "default";
>> +		pinctrl-0 = <&pinctrl_stmpe_novena>;
>> +		vio-supply = <&reg_3p3v>;
>> +		vcc-supply = <&reg_3p3v>;
>> +
>> +		stmpe_touchscreen {
>> +			compatible = "st,stmpe-ts";
>> +			ts,sample-time = <4>;
>> +			ts,mod-12b = <1>;
>> +			ts,ref-sel = <0>;
>> +			ts,adc-freq = <1>;
>> +			ts,ave-ctrl = <1>;
>> +			ts,touch-det-delay = <2>;
>> +			ts,settling = <2>;
>> +			ts,fraction-z = <7>;
>> +			ts,i-drive = <1>;
>> +		};
>> +		
>> +	};
> This is also missing a binding, but that's not your fault so I won't
> block this patch based on this. Could you make sure to ping the driver
> author about this or fix it in a follow on patch?
Sure, or I'm happy to add binding documentation as a separate patch. 
It's annoyed me long enough to have to look into the source to find values.
>> +
>> +	accel: mma8452@1c {
>> +		compatible = "fsl,mma8452";
>> +		reg = <0x1c>;
>> +	};
>> +
>> +	rtc: pcf8523@68 {
>> +		compatible = "nxp,pcf8523";
>> +		reg = <0x68>;
>> +	};
>> +};
>> +
>> +&i2c2 {
>> +	pinctrl-names = "default";
>> +	pinctrl-0 = <&pinctrl_i2c2_novena>;
>> +	status = "okay";
>> +
>> +	pmic: pfuze100@08 {
>> +		compatible = "fsl,pfuze100";
>> +		reg = <0x08>;
>> +
>> +		regulators {
>> +			sw1a_reg: sw1ab {
>> +				regulator-min-microvolt = <300000>;
>> +				regulator-max-microvolt = <1875000>;
>> +				regulator-boot-on;
>> +				regulator-always-on;
>> +				regulator-ramp-delay = <6250>;
>> +			};
>> +
>> +			sw1c_reg: sw1c {
>> +				regulator-min-microvolt = <300000>;
>> +				regulator-max-microvolt = <1875000>;
>> +				regulator-boot-on;
>> +				regulator-always-on;
>> +			};
>> +
>> +			sw2_reg: sw2 {
>> +				regulator-min-microvolt = <800000>;
>> +				regulator-max-microvolt = <3300000>;
>> +				regulator-boot-on;
>> +				regulator-always-on;
>> +			};
>> +
>> +			sw3a_reg: sw3a {
>> +				regulator-min-microvolt = <400000>;
>> +				regulator-max-microvolt = <1975000>;
>> +				regulator-boot-on;
>> +				regulator-always-on;
>> +			};
>> +
>> +			sw3b_reg: sw3b {
>> +				regulator-min-microvolt = <400000>;
>> +				regulator-max-microvolt = <1975000>;
>> +				regulator-boot-on;
>> +				regulator-always-on;
>> +			};
>> +
>> +			sw4_reg: sw4 {
>> +				regulator-min-microvolt = <800000>;
>> +				regulator-max-microvolt = <3300000>;
>> +			};
>> +
>> +			swbst_reg: swbst {
>> +				regulator-min-microvolt = <5000000>;
>> +				regulator-max-microvolt = <5150000>;
>> +				regulator-boot-on;
>> +			};
>> +
>> +			snvs_reg: vsnvs {
>> +				regulator-min-microvolt = <1000000>;
>> +				regulator-max-microvolt = <3000000>;
>> +				regulator-boot-on;
>> +				regulator-always-on;
>> +			};
>> +
>> +			vref_reg: vrefddr {
>> +				regulator-boot-on;
>> +				regulator-always-on;
>> +			};
>> +
>> +			vgen1_reg: vgen1 {
>> +				regulator-min-microvolt = <800000>;
>> +				regulator-max-microvolt = <1550000>;
>> +			};
>> +
>> +			vgen2_reg: vgen2 {
>> +				regulator-min-microvolt = <800000>;
>> +				regulator-max-microvolt = <1550000>;
>> +			};
>> +
>> +			vgen3_reg: vgen3 {
>> +				regulator-min-microvolt = <1800000>;
>> +				regulator-max-microvolt = <3300000>;
>> +			};
>> +
>> +			vgen4_reg: vgen4 {
>> +				regulator-min-microvolt = <1800000>;
>> +				regulator-max-microvolt = <3300000>;
>> +				regulator-always-on;
>> +			};
>> +
>> +			vgen5_reg: vgen5 {
>> +				regulator-min-microvolt = <1800000>;
>> +				regulator-max-microvolt = <3300000>;
>> +				regulator-always-on;
>> +			};
>> +
>> +			vgen6_reg: vgen6 {
>> +				regulator-min-microvolt = <1800000>;
>> +				regulator-max-microvolt = <3300000>;
>> +				regulator-always-on;
>> +			};
>> +		};
>> +	};
>> +};
>> +
>> +&i2c3 {
>> +	pinctrl-names = "default";
>> +	pinctrl-0 = <&pinctrl_i2c3_novena>;
>> +	status = "okay";
>> +
>> +	codec: es8328@11 {
>> +		compatible = "everest,es8328";
>> +		reg = <0x11>;
>> +		DVDD-supply = <&reg_audio_codec>;
>> +		AVDD-supply = <&reg_audio_codec>;
>> +		PVDD-supply = <&reg_audio_codec>;
>> +		HPVDD-supply = <&reg_audio_codec>;
>> +
>> +		pinctrl-names = "default";
>> +		pinctrl-0 = <&pinctrl_sound_novena>;
>> +
>> +		clocks = <&clks IMX6QDL_CLK_CKO1>;
>> +		assigned-clocks = <&clks IMX6QDL_CLK_CKO>, <&clks IMX6QDL_CLK_CKO1_SEL>, <&clks IMX6QDL_CLK_PLL4_AUDIO>, <&clks IMX6QDL_CLK_CKO1>;
>> +		assigned-clock-parents = <&clks IMX6QDL_CLK_CKO1>, <&clks IMX6QDL_CLK_PLL4_AUDIO_DIV>, <&clks IMX6QDL_CLK_OSC>, <&clks IMX6QDL_CLK_CKO1_PODF>;
>> +		assigned-clock-rates = <0 0 722534400 22579200>;
>> +	};
>> +
>> +	eepromoops@56 {
>> +		compatible = "kosagi,eepromoops";
> Missing binding.
Again, I'll remove this node until the device is pushed.
>> +		reg = <0x56>;
>> +	};
>> +
>> +	it6251@5c {
>> +		compatible = "it,it6251";
> Missing vendor prefix and binding. Also it seems there is no driver for
> this upstream, so unless you are completely sure about the binding it
> may be better to drop this node until there is a driver using it.
You're right, this will require more work and may gain a more complex
binding as features are added (e.g. interactions with DRM, as it's an
LVDS -> eDP chip which has to interact with &ldb.)  Again, I'll drop
this until the driver is pushed.

>> +		reg = <0x5c>;
>> +		power-supply = <&reg_display>;
>> +	};
>> +};
>> +
>> +&iomuxc {
>> +	pinctrl-names = "default";
>> +	pinctrl-0 = <&pinctrl_hog>;
>> +
>> +	audmux {
>> +		pinctrl_audmux_novena: audmuxgrp-novena {
>> +			fsl,pins = <
>> +				MX6QDL_PAD_CSI0_DAT7__AUD3_RXD  0x80000000
>> +				MX6QDL_PAD_CSI0_DAT4__AUD3_TXC  0x80000000
>> +				MX6QDL_PAD_CSI0_DAT5__AUD3_TXD  0x80000000
>> +				MX6QDL_PAD_CSI0_DAT6__AUD3_TXFS 0x80000000
>> +			>;
>> +		};
>> +	};
>> +
>> +	kpp-keys {
>> +		pinctrl_kpp_novena: kppgrp-novena {
>> +			fsl,pins = <
>> +				/* Front panel button */
>> +				MX6QDL_PAD_KEY_ROW1__KEY_ROW1 0x1b0b1
>> +
>> +				/* Fake column driver, not connected to anything */
>> +				MX6QDL_PAD_KEY_COL1__KEY_COL1 0x1b0b1
>> +			>;
>> +		};
>> +	};	
>> +		
>> +	backlight {
>> +		pinctrl_backlight_novena: backlightgrp-novena {
>> +			fsl,pins = <
>> +				MX6QDL_PAD_DISP0_DAT8__PWM1_OUT   0x1b0b0
>> +				MX6QDL_PAD_CSI0_DAT10__GPIO5_IO28 0x80000000
>> +				MX6QDL_PAD_KEY_ROW4__GPIO4_IO15   0x80000000
>> +			>;
>> +		};
>> +	};
>> +
>> +	ecspi3 {
>> +		pinctrl_ecspi3_novena: ecspi3grp-novena {
>> +			fsl,pins = <
>> +				MX6QDL_PAD_DISP0_DAT2__ECSPI3_MISO 0x100b1
>> +				MX6QDL_PAD_DISP0_DAT1__ECSPI3_MOSI 0x100b1
>> +				MX6QDL_PAD_DISP0_DAT0__ECSPI3_SCLK 0x100b1
>> +			>;
>> +		};
>> +	};
>> +
>> +	enet {
>> +		pinctrl_enet_novena: enetgrp-novena {
>> +			fsl,pins = <
>> +				MX6QDL_PAD_ENET_MDIO__ENET_MDIO       0x1b0b0
>> +				MX6QDL_PAD_ENET_MDC__ENET_MDC         0x1b0b0
>> +				MX6QDL_PAD_RGMII_TXC__RGMII_TXC       0x1b020
>> +				MX6QDL_PAD_RGMII_TD0__RGMII_TD0       0x1b028
>> +				MX6QDL_PAD_RGMII_TD1__RGMII_TD1       0x1b028
>> +				MX6QDL_PAD_RGMII_TD2__RGMII_TD2       0x1b028
>> +				MX6QDL_PAD_RGMII_TD3__RGMII_TD3       0x1b028
>> +				MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x1b028
>> +				MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK  0x1b0b0
>> +				MX6QDL_PAD_RGMII_RXC__RGMII_RXC       0x1b0b0
>> +				MX6QDL_PAD_RGMII_RD0__RGMII_RD0       0x1b0b0
>> +				MX6QDL_PAD_RGMII_RD1__RGMII_RD1       0x1b0b0
>> +				MX6QDL_PAD_RGMII_RD2__RGMII_RD2       0x1b0b0
>> +				MX6QDL_PAD_RGMII_RD3__RGMII_RD3       0x1b0b0
>> +				MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b0b0
>> +				MX6QDL_PAD_GPIO_16__ENET_REF_CLK      0x4001b0a8
>> +
>> +				/* Ethernet reset */
>> +				MX6QDL_PAD_EIM_D23__GPIO3_IO23  0x80000000
>> +			>;
>> +		};
>> +	};
>> +
>> +	gpio_keys {
>> +		pinctrl_gpio_keys_novena: gpiokeysgrp-novena {
>> +			fsl,pins = <
>> +				/* User button */
>> +				MX6QDL_PAD_KEY_COL4__GPIO4_IO14 0x1b0b0
>> +
>> +				/* PCIe Wakeup */
>> +				MX6QDL_PAD_EIM_D22__GPIO3_IO22  0x1f0e0
>> +
>> +				/* Lid switch */
>> +				MX6QDL_PAD_KEY_COL3__GPIO4_IO12 0x1b0b0
>> +			>;
>> +		};
>> +	};
>> +
>> +	hdmi {
>> +		pinctrl_hdmi_novena: hdmigrp-novena {
>> +			fsl,pins = <
>> +				MX6QDL_PAD_KEY_ROW2__HDMI_TX_CEC_LINE 0x1f8b0
>> +				MX6QDL_PAD_EIM_A24__GPIO5_IO04        0x80000000
>> +			>;
>> +		};
>> +	};
>> +
>> +	i2c1 {
>> +		pinctrl_i2c1_novena: i2c1grp-novena {
>> +			fsl,pins = <
>> +				MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1
>> +				MX6QDL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1
>> +			>;
>> +		};
>> +	};
>> +
>> +	i2c2 {
>> +		pinctrl_i2c2_novena: i2c2grp-novena {
>> +			fsl,pins = <
>> +				MX6QDL_PAD_EIM_EB2__I2C2_SCL 0x4001b8b1
>> +				MX6QDL_PAD_EIM_D16__I2C2_SDA 0x4001b8b1
>> +			>;
>> +		};
>> +	};
>> +
>> +	i2c3 {
>> +		pinctrl_i2c3_novena: i2c3grp-novena {
>> +			fsl,pins = <
>> +				MX6QDL_PAD_EIM_D17__I2C3_SCL 0x4001b8b1
>> +				MX6QDL_PAD_EIM_D18__I2C3_SDA 0x4001b8b1
>> +			>;
>> +		};
>> +	};
>> +
>> +	leds {
>> +		pinctrl_leds_novena: ledsgrp-novena {
>> +			fsl,pins = <
>> +				MX6QDL_PAD_SD1_DAT3__GPIO1_IO21 0x80000000
>> +			>;
>> +		};
>> +	};
>> +
>> +	fpga {
>> +		pinctrl_fpga_gpio: fpgagpiogrp-novena {
>> +			fsl,pins = <
>> +				/* FPGA power */
>> +				MX6QDL_PAD_SD1_DAT1__GPIO1_IO17 0x80000000
>> +
>> +				/* Reset */
>> +				MX6QDL_PAD_DISP0_DAT13__GPIO5_IO07 0x80000000
>> +
>> +				/* FPGA GPIOs */
>> +				MX6QDL_PAD_EIM_DA0__GPIO3_IO00	0x80000000
>> +				MX6QDL_PAD_EIM_DA1__GPIO3_IO01	0x80000000
>> +				MX6QDL_PAD_EIM_DA2__GPIO3_IO02	0x80000000
>> +				MX6QDL_PAD_EIM_DA3__GPIO3_IO03	0x80000000
>> +				MX6QDL_PAD_EIM_DA4__GPIO3_IO04	0x80000000
>> +				MX6QDL_PAD_EIM_DA5__GPIO3_IO05  0x80000000
>> +				MX6QDL_PAD_EIM_DA6__GPIO3_IO06  0x80000000
>> +				MX6QDL_PAD_EIM_DA7__GPIO3_IO07  0x80000000
>> +				MX6QDL_PAD_EIM_DA8__GPIO3_IO08	0x80000000
>> +				MX6QDL_PAD_EIM_DA9__GPIO3_IO09	0x80000000
>> +				MX6QDL_PAD_EIM_DA10__GPIO3_IO10	0x80000000
>> +				MX6QDL_PAD_EIM_DA11__GPIO3_IO11	0x80000000
>> +				MX6QDL_PAD_EIM_DA12__GPIO3_IO12	0x80000000
>> +				MX6QDL_PAD_EIM_DA13__GPIO3_IO13	0x80000000
>> +				MX6QDL_PAD_EIM_DA14__GPIO3_IO14	0x80000000
>> +				MX6QDL_PAD_EIM_DA15__GPIO3_IO15	0x80000000
>> +				MX6QDL_PAD_EIM_A16__GPIO2_IO22  0x80000000
>> +				MX6QDL_PAD_EIM_A17__GPIO2_IO21  0x80000000
>> +				MX6QDL_PAD_EIM_A18__GPIO2_IO20  0x80000000
>> +				MX6QDL_PAD_EIM_CS0__GPIO2_IO23	0x80000000
>> +				MX6QDL_PAD_EIM_CS1__GPIO2_IO24	0x80000000
>> +				MX6QDL_PAD_EIM_LBA__GPIO2_IO27  0x80000000
>> +				MX6QDL_PAD_EIM_OE__GPIO2_IO25   0x80000000
>> +				MX6QDL_PAD_EIM_RW__GPIO2_IO26   0x80000000
>> +				MX6QDL_PAD_EIM_WAIT__GPIO5_IO00 0x80000000
>> +				MX6QDL_PAD_EIM_BCLK__GPIO6_IO31 0x80000000
>> +			>;
>> +		};
>> +
>> +		pinctrl_fpga_eim: fpgaeimgrp-novena {
>> +			fsl,pins = <
>> +				/* FPGA power */
>> +				MX6QDL_PAD_SD1_DAT1__GPIO1_IO17 0x80000000
>> +
>> +				/* Reset */
>> +				MX6QDL_PAD_DISP0_DAT13__GPIO5_IO07 0x80000000
>> +
>> +				/* FPGA GPIOs */
>> +				MX6QDL_PAD_EIM_DA0__EIM_AD00    0xb0f1
>> +				MX6QDL_PAD_EIM_DA1__EIM_AD01    0xb0f1
>> +				MX6QDL_PAD_EIM_DA2__EIM_AD02    0xb0f1
>> +				MX6QDL_PAD_EIM_DA3__EIM_AD03    0xb0f1
>> +				MX6QDL_PAD_EIM_DA4__EIM_AD04    0xb0f1
>> +				MX6QDL_PAD_EIM_DA5__EIM_AD05    0xb0f1
>> +				MX6QDL_PAD_EIM_DA6__EIM_AD06    0xb0f1
>> +				MX6QDL_PAD_EIM_DA7__EIM_AD07    0xb0f1
>> +				MX6QDL_PAD_EIM_DA8__EIM_AD08    0xb0f1
>> +				MX6QDL_PAD_EIM_DA9__EIM_AD09    0xb0f1
>> +				MX6QDL_PAD_EIM_DA10__EIM_AD10   0xb0f1
>> +				MX6QDL_PAD_EIM_DA11__EIM_AD11   0xb0f1
>> +				MX6QDL_PAD_EIM_DA12__EIM_AD12   0xb0f1
>> +				MX6QDL_PAD_EIM_DA13__EIM_AD13   0xb0f1
>> +				MX6QDL_PAD_EIM_DA14__EIM_AD14   0xb0f1
>> +				MX6QDL_PAD_EIM_DA15__EIM_AD15   0xb0f1
>> +				MX6QDL_PAD_EIM_A16__EIM_ADDR16  0xb0f1
>> +				MX6QDL_PAD_EIM_A17__EIM_ADDR17  0xb0f1
>> +				MX6QDL_PAD_EIM_A18__EIM_ADDR18  0xb0f1
>> +				MX6QDL_PAD_EIM_CS0__EIM_CS0_B   0xb0f1
>> +				MX6QDL_PAD_EIM_CS1__EIM_CS1_B   0xb0f1
>> +				MX6QDL_PAD_EIM_LBA__EIM_LBA_B   0xb0f1
>> +				MX6QDL_PAD_EIM_OE__EIM_OE_B     0xb0f1
>> +				MX6QDL_PAD_EIM_RW__EIM_RW       0xb0f1
>> +				MX6QDL_PAD_EIM_WAIT__EIM_WAIT_B 0xb0f1
>> +				MX6QDL_PAD_EIM_BCLK__EIM_BCLK   0xb0f1
>> +			>;
>> +		};
>> +	};
>> +
>> +	hog {
>> +		pinctrl_hog: hoggrp-novena {
>> +			fsl,pins = <
>> +				/* Peek array power */
>> +				MX6QDL_PAD_EIM_D19__GPIO3_IO19  0x80000000
>> +			>;
>> +		};
>> +	};
> What is this used for? If possible please avoid using any hogs.
>
There is a pin labeled "5V PEEK" which is simply a 500 mA @ 5V power
supply meant for use with userland.  I suppose it should technically be
a power-supply, but from what I understand power-supply devices cannot
be manipulated from userspace.

What approach should be taken here?
>> +
>> +	pcie {
>> +		pinctrl_pcie_novena: pciegrp-novena {
>> +			fsl,pins = <
>> +				/* Reset */
>> +				MX6QDL_PAD_EIM_D29__GPIO3_IO29  0x80000000
>> +
>> +				/* Power On */
>> +				MX6QDL_PAD_GPIO_17__GPIO7_IO12  0x80000000
>> +
>> +				/* Wifi kill */
>> +				MX6QDL_PAD_EIM_A22__GPIO2_IO16  0x80000000
>> +			>;
>> +		};
>> +	};
>> +
>> +	sata {
>> +		pinctrl_sata_novena: satagrp-novena {
>> +			fsl,pins = <
>> +				MX6QDL_PAD_EIM_D30__GPIO3_IO30  0x80000000
>> +			>;
>> +		};
>> +	};
>> +
>> +	senoko {
>> +		pinctrl_senoko_novena: senokogrp-novena {
>> +			fsl,pins = <
>> +				/* Senoko IRQ line */
>> +				MX6QDL_PAD_SD1_CLK__GPIO1_IO20 0x13048
>> +
>> +				/* Senoko reset line */
>> +				MX6QDL_PAD_CSI0_VSYNC__GPIO5_IO21 0x80000000
>> +			>;
>> +		};
>> +	};
>> +
>> +	sound {
>> +		pinctrl_sound_novena: soundgrp-novena {
>> +			fsl,pins = <
>> +				/* Audio power regulator */
>> +				MX6QDL_PAD_DISP0_DAT23__GPIO5_IO17 0x80000000
>> +
>> +				/* Headphone plug */
>> +				MX6QDL_PAD_DISP0_DAT21__GPIO5_IO15 0x80000000
>> +
>> +				MX6QDL_PAD_GPIO_0__CCM_CLKO1       0x80000000
>> +			>;
>> +		};
>> +	};
>> +
>> +	ts {
>> +		pinctrl_stmpe_novena: stmpegrp-novena {
>> +			fsl,pins = <
>> +				/* Touchscreen interrupt */
>> +				MX6QDL_PAD_DISP0_DAT19__GPIO5_IO13 0x80000000
>> +			>;
>> +		};
>> +	};
>> +
>> +	uart2 {
>> +		pinctrl_uart2_novena: uart2grp-novena {
>> +			fsl,pins = <
>> +				MX6QDL_PAD_EIM_D26__UART2_TX_DATA   0x1b0b1
>> +				MX6QDL_PAD_EIM_D27__UART2_RX_DATA   0x1b0b1
>> +			>;
>> +		};
>> +	};
>> +
>> +	uart3 {
>> +		pinctrl_uart3_novena: uart3grp-novena {
>> +			fsl,pins = <
>> +				MX6QDL_PAD_EIM_D24__UART3_TX_DATA 0x1b0b1
>> +				MX6QDL_PAD_EIM_D25__UART3_RX_DATA 0x1b0b1
>> +			>;
>> +		};
>> +	};
>> +	uart4 {
>> +		pinctrl_uart4_novena: uart4grp-novena {
>> +			fsl,pins = <
>> +				MX6QDL_PAD_CSI0_DAT12__UART4_TX_DATA 0x1b0b1
>> +				MX6QDL_PAD_CSI0_DAT13__UART4_RX_DATA 0x1b0b1
>> +			>;
>> +		};
>> +	};
>> +
>> +	usbotg {
>> +		pinctrl_usbotg_novena: usbotggrp-novena {
>> +			fsl,pins = <
>> +				MX6QDL_PAD_ENET_RX_ER__USB_OTG_ID 0x17059
>> +			>;
>> +		};
>> +	};
>> +
>> +	usdhc2 {
>> +		pinctrl_usdhc2_novena: usdhc2grp-novena {
>> +			fsl,pins = <
>> +				MX6QDL_PAD_SD2_CMD__SD2_CMD    0x17059
>> +				MX6QDL_PAD_SD2_CLK__SD2_CLK    0x10059
>> +				MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x17059
>> +				MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x17059
>> +				MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x17059
>> +				MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x17059
>> +
>> +				/* Write protect */
>> +				MX6QDL_PAD_GPIO_2__GPIO1_IO02   0x80000000
>> +
>> +				/* Card detect */
>> +				MX6QDL_PAD_GPIO_4__GPIO1_IO04   0x80000000
>> +			>;
>> +		};
>> +	};
>> +
>> +	usdhc3 {
>> +		pinctrl_usdhc3_novena: usdhc3grp-novena {
>> +			fsl,pins = <
>> +				MX6QDL_PAD_SD3_CMD__SD3_CMD    0x17059
>> +				MX6QDL_PAD_SD3_CLK__SD3_CLK    0x10059
>> +				MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17059
>> +				MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17059
>> +				MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17059
>> +				MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17059
>> +			>;
>> +		};
>> +	};
>> +};
>> +
>> +&kpp {
>> +	pinctrl-names = "default";
>> +	pinctrl-0 = <&pinctrl_kpp_novena>;
>> +	linux,keymap = <
>> +		MATRIX_KEY(1, 1, KEY_CONFIG)
>> +	>;
>> +	wakeup;
> This probably needs a prefix.
Good catch.  imx_keypad.c calls device_init_wakeup(..., 1), meaning it's
always a wakesource.  This line can be dropped entirely.
>> +	status = "okay";
>> +};
>> +
>> +&ldb {
>> +	fsl,dual-channel;
>> +	status = "okay";
>> +	lvds-channel@0 {
>> +		fsl,data-mapping = "jeida";
>> +		fsl,data-width = <24>;
>> +		fsl,panel = <&panel>;
>> +		status = "okay";
>> +	};
>> +};
>> +
>> +&pcie {
>> +	pinctrl-names = "default";
>> +	pinctrl-0 = <&pinctrl_pcie_novena>;
>> +	reset-gpio = <&gpio3 29 GPIO_ACTIVE_HIGH>;
>> +	bus-supply = <&reg_pcie>;
>> +	status = "okay";
>> +};
>> +
>> +&sata {
>> +	target-supply = <&reg_sata>;
>> +	fsl,transmit-level-mV = <1025>;
>> +	fsl,transmit-boost-mdB = <0>;
>> +	fsl,transmit-atten-16ths = <8>;
>> +	status = "okay";
>> +};
>> +
>> +&ssi1 {
>> +	fsl,mode = "i2s-slave";
>> +	status = "okay";
>> +};
>> +
>> +&uart2 {
>> +	pinctrl-names = "default";
>> +	pinctrl-0 = <&pinctrl_uart2_novena>;
>> +	status = "okay";
>> +};
>> +
>> +&uart3 {
>> +	pinctrl-names = "default";
>> +	pinctrl-0 = <&pinctrl_uart3_novena>;
>> +	status = "okay";
>> +};
>> +
>> +&uart4 {
>> +	pinctrl-names = "default";
>> +	pinctrl-0 = <&pinctrl_uart4_novena>;
>> +	status = "okay";
>> +};
>> +
>> +&usbotg {
>> +	vbus-supply = <&reg_usb_otg_vbus>;
>> +	dr_mode = "otg";
>> +	pinctrl-names = "default";
>> +	pinctrl-0 = <&pinctrl_usbotg_novena>;
>> +	disable-over-current;
>> +	status = "okay";
>> +};
>> +
>> +&usbh1 {
>> +	vbus-supply = <&swbst_reg>;
>> +	status = "okay";
>> +};
>> +
>> +&usdhc2 {
>> +	pinctrl-names = "default";
>> +	pinctrl-0 = <&pinctrl_usdhc2_1>;
>> +	pinctrl-0 = <&pinctrl_usdhc2_novena>;
>> +	cd-gpios = <&gpio1 4 GPIO_ACTIVE_HIGH>;
>> +	wp-gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>;
>> +	status = "okay";
>> +};
>> +
>> +&usdhc3 {
>> +	pinctrl-names = "default";
>> +	pinctrl-0 = <&pinctrl_usdhc3_novena>;
>> +	non-removable;
>> +	status = "okay";
>> +};
>


--
To unsubscribe from this list: send the line "unsubscribe linux-pci" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [DMA Engine]     [Linux Coverity]     [Linux USB]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Greybus]

  Powered by Linux