Re: [PATCH v2 4/4] ARM: dts: imx6q: add Novena board

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Am Montag, den 22.12.2014, 16:32 +0800 schrieb Sean Cross:
> Novena is an open-hardware laptop/desktop/bare board.
> 
> See http://www.kosagi.com/w/index.php?title=Novena_Main_Page
> 
> This device tree contains additional nodes for FPGA support.
> 
> Signed-off-by: Sean Cross <xobs@xxxxxxxxxx>

Some remarks inline. Otherwise looks good to me.

Regards,
Lucas

> ---
>  arch/arm/boot/dts/Makefile         |   1 +
>  arch/arm/boot/dts/imx6q-novena.dts | 856 +++++++++++++++++++++++++++++++++++++
>  2 files changed, 857 insertions(+)
>  create mode 100644 arch/arm/boot/dts/imx6q-novena.dts
> 
> diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
> index 38c89ca..b2b4770 100644
> --- a/arch/arm/boot/dts/Makefile
> +++ b/arch/arm/boot/dts/Makefile
> @@ -234,6 +234,7 @@ dtb-$(CONFIG_ARCH_MXC) += \
>  	imx6q-gw552x.dtb \
>  	imx6q-hummingboard.dtb \
>  	imx6q-nitrogen6x.dtb \
> +	imx6q-novena.dtb \
>  	imx6q-phytec-pbab01.dtb \
>  	imx6q-rex-pro.dtb \
>  	imx6q-sabreauto.dtb \
> diff --git a/arch/arm/boot/dts/imx6q-novena.dts b/arch/arm/boot/dts/imx6q-novena.dts
> new file mode 100644
> index 0000000..d4a3a06
> --- /dev/null
> +++ b/arch/arm/boot/dts/imx6q-novena.dts
> @@ -0,0 +1,856 @@
> +/*
> + * Copyright 2014 Sutajio Ko-Usagi PTE LTD
> + * Copyright 2012 Freescale Semiconductor, Inc.
> + * Copyright 2011 Linaro Ltd.
> + *
> + * The code contained herein is licensed under the GNU General Public
> + * License. You may obtain a copy of the GNU General Public License
> + * Version 2 or later at the following locations:
> + *
> + * http://www.opensource.org/licenses/gpl-license.html
> + * http://www.gnu.org/copyleft/gpl.html
> + */
> +
> +/dts-v1/;
> +#include "imx6q.dtsi"
> +#include <dt-bindings/gpio/gpio.h>
> +#include <dt-bindings/input/input.h>
> +
> +/ {
> +	model = "Kosagi Novena Dual/Quad";
> +	compatible = "kosagi,imx6q-novena", "fsl,imx6q";
> +
> +	memory {
> +		reg = <0x10000000 0xefffffff>;
> +	};
> +
> +	chosen {
> +		stdout-path = &uart2;
> +	};
> +
> +	regulators {
> +		compatible = "simple-bus";
> +

I know it is common practice in many DTs, but this "bus" is completely
unnecessary and we should stop using this pattern for new DTs. Please
move those regulators directly into the parent node.

> +		reg_2p5v: 2p5v {
> +			compatible = "regulator-fixed";
> +			regulator-name = "2P5V";
> +			regulator-min-microvolt = <2500000>;
> +			regulator-max-microvolt = <2500000>;
> +			regulator-always-on;
> +		};
> +
> +		reg_3p3v: 3p3v {
> +			compatible = "regulator-fixed";
> +			regulator-name = "3P3V";
> +			regulator-min-microvolt = <3300000>;
> +			regulator-max-microvolt = <3300000>;
> +			regulator-always-on;
> +		};
> +
> +		reg_usb_otg_vbus: usb_otg_vbus {
> +			compatible = "regulator-fixed";
> +			regulator-name = "usb_otg_vbus";
> +			regulator-min-microvolt = <5000000>;
> +			regulator-max-microvolt = <5000000>;
> +			enable-active-high;
> +		};
> +
> +		reg_audio_codec: es8328-regulator {
> +			compatible = "regulator-fixed";
> +			regulator-name = "es8328-power";
> +			regulator-boot-on;
> +			regulator-min-microvolt = <5000000>;
> +			regulator-max-microvolt = <5000000>;
> +			startup-delay-us = <400000>;
> +			gpio = <&gpio5 17 GPIO_ACTIVE_HIGH>;
> +			enable-active-high;
> +		};
> +
> +		reg_pcie: pcie-regulator {
> +			compatible = "regulator-fixed";
> +			regulator-name = "pcie-bus-power";
> +			regulator-min-microvolt = <1500000>;
> +			regulator-max-microvolt = <1500000>;
> +			gpio = <&gpio7 12 GPIO_ACTIVE_HIGH>;
> +			enable-active-high;
> +		};
> +
> +		reg_lvds_lcd: lcd-regulator {
> +			compatible = "regulator-fixed";
> +			regulator-name = "lcd-lvds-power";
> +			regulator-min-microvolt = <3300000>;
> +			regulator-max-microvolt = <3300000>;
> +			gpio = <&gpio4 15 GPIO_ACTIVE_HIGH>;
> +			enable-active-high;
> +		};
> +
> +		reg_display: display-regulator {
> +			compatible = "regulator-fixed";
> +			regulator-name = "lcd-display-power";
> +			regulator-min-microvolt = <3300000>;
> +			regulator-max-microvolt = <3300000>;
> +			startup-delay-us = <200000>;
> +			gpio = <&gpio5 28 GPIO_ACTIVE_HIGH>;
> +			enable-active-high;
> +		};
> +
> +		reg_sata: sata-regulator {
> +			compatible = "regulator-fixed";
> +			regulator-name = "sata-power";
> +			regulator-boot-on;
> +			regulator-min-microvolt = <3300000>;
> +			regulator-max-microvolt = <3300000>;
> +			startup-delay-us = <10000>;
> +			gpio = <&gpio3 30 GPIO_ACTIVE_HIGH>;
> +			enable-active-high;
> +		};
> +	};
> +
> +	gpio-keys {
> +		compatible = "gpio-keys";
> +		pinctrl-names = "default";
> +		pinctrl-0 = <&pinctrl_gpio_keys_novena>;
> +
> +		user-button {
> +			label = "User Button";
> +			gpios = <&gpio4 14 GPIO_ACTIVE_LOW>;
> +			linux,code = <KEY_POWER>;
> +		};
> +
> +		lid {
> +			label = "Lid";
> +			gpios = <&gpio4 12 GPIO_ACTIVE_LOW>;
> +			linux,input-type = <5>; /* EV_SW */
> +			linux,code = <0>; /* SW_LID */
> +		};
> +	};
> +
> +	leds {
> +		compatible = "gpio-leds";
> +		pinctrl-names = "default";
> +		pinctrl-0 = <&pinctrl_leds_novena>;
> +
> +		heartbeat {
> +			label = "novena:white:panel";
> +			gpios = <&gpio1 21 GPIO_ACTIVE_HIGH>;
> +			linux,default-trigger = "default-on";
> +		};
> +	};
> +
> +	backlight: backlight {
> +		compatible = "pwm-backlight";
> +		pwms = <&pwm1 0 10000000>;
> +
> +		pinctrl-names = "default";
> +		pinctrl-0 = <&pinctrl_backlight_novena>;
> +		power-supply = <&reg_lvds_lcd>;
> +
> +		brightness-levels = <0 3 6 12 16 24 32 48 64 96 128 192 255>;
> +		default-brightness-level = <12>;
> +	};
> +
> +	panel: panel {
> +		compatible = "innolux,n133hse-ea1", "simple-panel";
> +		backlight = <&backlight>;
> +	};
> +
> +	sound {
> +		compatible = "fsl,imx-audio-es8328";
> +		model = "imx-audio-es8328";
> +		ssi-controller = <&ssi1>;
> +		audio-codec = <&codec>;
> +		audio-amp-supply = <&reg_audio_codec>;
> +		jack-gpio = <&gpio5 15 GPIO_ACTIVE_HIGH>;
> +		audio-routing = 
> +			"Speaker", "LOUT2",
> +			"Speaker", "ROUT2",
> +			"Speaker", "audio-amp",
> +			"Headphone", "ROUT1",
> +			"Headphone", "LOUT1",
> +			"LINPUT1", "Mic Jack",
> +			"RINPUT1", "Mic Jack",
> +			"Mic Jack", "Mic Bias";
> +		mux-int-port = <0x1>;
> +		mux-ext-port = <0x3>;
> +	};
> +};
> +
> +&audmux {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pinctrl_audmux_novena>;
> +	status = "okay";
> +};
> +
> +&fec {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pinctrl_enet_novena>;
> +	phy-mode = "rgmii";
> +	phy-reset-gpios = <&gpio3 23 GPIO_ACTIVE_HIGH>;
> +	mac-address = [00 00 00 00 00 00];
> +	rxc-skew-ps = <3000>;
> +	rxdv-skew-ps = <0>;
> +	txc-skew-ps = <3000>;
> +	txen-skew-ps = <0>;
> +	rxd0-skew-ps = <0>;
> +	rxd1-skew-ps = <0>;
> +	rxd2-skew-ps = <0>;
> +	rxd3-skew-ps = <0>;
> +	txd0-skew-ps = <3000>;
> +	txd1-skew-ps = <3000>;
> +	txd2-skew-ps = <3000>;
> +	txd3-skew-ps = <3000>;
> +	status = "okay";
> +};
> +
> +&ecspi3 {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pinctrl_ecspi3_novena>;
> +	fsl,spi-num-chipselects = <3>;
> +	status = "okay";
> +
> +	spidev@0 {
> +		compatible = "spidev";
> +		spi-max-frequency = <30000000>;
> +		reg = <0>;
> +	};
> +};
> +
> +&hdmi {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pinctrl_hdmi_novena>;
> +	ddc-i2c-bus = <&i2c2>;
> +	status = "okay";
> +};
> +
> +&i2c1 {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pinctrl_i2c1_novena>;
> +	status = "okay";
> +
> +	sbs_battery: bq20z75@0b {
> +		compatible = "sbs,sbs-battery";
> +		reg = <0x0b>;
> +		sbs,i2c-retry-count = <50>;
> +	};
> +
> +	senoko: senoko@20 {
> +		pinctrl-names = "default";
> +		pinctrl-0 = <&pinctrl_senoko_novena>;
> +		compatible = "kosagi,senoko";

This is missing a binding documentation.

> +		reg = <0x20>;
> +		irq-gpio = <&gpio1 20 GPIO_ACTIVE_HIGH>;
> +		supplied-to = "sbs-0-000b";
> +	};
> +
> +	stmpe811@44 {
> +		compatible = "st,stmpe811";
> +		#address-cells = <1>;
> +		#size-cells = <0>;
> +		reg = <0x44>;
> +		irq-gpio = <&gpio5 13 GPIO_ACTIVE_HIGH>;
> +		id = <0>;
> +		blocks = <0x5>;
> +		irq-trigger = <0x1>;
> +		pinctrl-names = "default";
> +		pinctrl-0 = <&pinctrl_stmpe_novena>;
> +		vio-supply = <&reg_3p3v>;
> +		vcc-supply = <&reg_3p3v>;
> +
> +		stmpe_touchscreen {
> +			compatible = "st,stmpe-ts";
> +			ts,sample-time = <4>;
> +			ts,mod-12b = <1>;
> +			ts,ref-sel = <0>;
> +			ts,adc-freq = <1>;
> +			ts,ave-ctrl = <1>;
> +			ts,touch-det-delay = <2>;
> +			ts,settling = <2>;
> +			ts,fraction-z = <7>;
> +			ts,i-drive = <1>;
> +		};
> +		
> +	};

This is also missing a binding, but that's not your fault so I won't
block this patch based on this. Could you make sure to ping the driver
author about this or fix it in a follow on patch?

> +
> +	accel: mma8452@1c {
> +		compatible = "fsl,mma8452";
> +		reg = <0x1c>;
> +	};
> +
> +	rtc: pcf8523@68 {
> +		compatible = "nxp,pcf8523";
> +		reg = <0x68>;
> +	};
> +};
> +
> +&i2c2 {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pinctrl_i2c2_novena>;
> +	status = "okay";
> +
> +	pmic: pfuze100@08 {
> +		compatible = "fsl,pfuze100";
> +		reg = <0x08>;
> +
> +		regulators {
> +			sw1a_reg: sw1ab {
> +				regulator-min-microvolt = <300000>;
> +				regulator-max-microvolt = <1875000>;
> +				regulator-boot-on;
> +				regulator-always-on;
> +				regulator-ramp-delay = <6250>;
> +			};
> +
> +			sw1c_reg: sw1c {
> +				regulator-min-microvolt = <300000>;
> +				regulator-max-microvolt = <1875000>;
> +				regulator-boot-on;
> +				regulator-always-on;
> +			};
> +
> +			sw2_reg: sw2 {
> +				regulator-min-microvolt = <800000>;
> +				regulator-max-microvolt = <3300000>;
> +				regulator-boot-on;
> +				regulator-always-on;
> +			};
> +
> +			sw3a_reg: sw3a {
> +				regulator-min-microvolt = <400000>;
> +				regulator-max-microvolt = <1975000>;
> +				regulator-boot-on;
> +				regulator-always-on;
> +			};
> +
> +			sw3b_reg: sw3b {
> +				regulator-min-microvolt = <400000>;
> +				regulator-max-microvolt = <1975000>;
> +				regulator-boot-on;
> +				regulator-always-on;
> +			};
> +
> +			sw4_reg: sw4 {
> +				regulator-min-microvolt = <800000>;
> +				regulator-max-microvolt = <3300000>;
> +			};
> +
> +			swbst_reg: swbst {
> +				regulator-min-microvolt = <5000000>;
> +				regulator-max-microvolt = <5150000>;
> +				regulator-boot-on;
> +			};
> +
> +			snvs_reg: vsnvs {
> +				regulator-min-microvolt = <1000000>;
> +				regulator-max-microvolt = <3000000>;
> +				regulator-boot-on;
> +				regulator-always-on;
> +			};
> +
> +			vref_reg: vrefddr {
> +				regulator-boot-on;
> +				regulator-always-on;
> +			};
> +
> +			vgen1_reg: vgen1 {
> +				regulator-min-microvolt = <800000>;
> +				regulator-max-microvolt = <1550000>;
> +			};
> +
> +			vgen2_reg: vgen2 {
> +				regulator-min-microvolt = <800000>;
> +				regulator-max-microvolt = <1550000>;
> +			};
> +
> +			vgen3_reg: vgen3 {
> +				regulator-min-microvolt = <1800000>;
> +				regulator-max-microvolt = <3300000>;
> +			};
> +
> +			vgen4_reg: vgen4 {
> +				regulator-min-microvolt = <1800000>;
> +				regulator-max-microvolt = <3300000>;
> +				regulator-always-on;
> +			};
> +
> +			vgen5_reg: vgen5 {
> +				regulator-min-microvolt = <1800000>;
> +				regulator-max-microvolt = <3300000>;
> +				regulator-always-on;
> +			};
> +
> +			vgen6_reg: vgen6 {
> +				regulator-min-microvolt = <1800000>;
> +				regulator-max-microvolt = <3300000>;
> +				regulator-always-on;
> +			};
> +		};
> +	};
> +};
> +
> +&i2c3 {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pinctrl_i2c3_novena>;
> +	status = "okay";
> +
> +	codec: es8328@11 {
> +		compatible = "everest,es8328";
> +		reg = <0x11>;
> +		DVDD-supply = <&reg_audio_codec>;
> +		AVDD-supply = <&reg_audio_codec>;
> +		PVDD-supply = <&reg_audio_codec>;
> +		HPVDD-supply = <&reg_audio_codec>;
> +
> +		pinctrl-names = "default";
> +		pinctrl-0 = <&pinctrl_sound_novena>;
> +
> +		clocks = <&clks IMX6QDL_CLK_CKO1>;
> +		assigned-clocks = <&clks IMX6QDL_CLK_CKO>, <&clks IMX6QDL_CLK_CKO1_SEL>, <&clks IMX6QDL_CLK_PLL4_AUDIO>, <&clks IMX6QDL_CLK_CKO1>;
> +		assigned-clock-parents = <&clks IMX6QDL_CLK_CKO1>, <&clks IMX6QDL_CLK_PLL4_AUDIO_DIV>, <&clks IMX6QDL_CLK_OSC>, <&clks IMX6QDL_CLK_CKO1_PODF>;
> +		assigned-clock-rates = <0 0 722534400 22579200>;
> +	};
> +
> +	eepromoops@56 {
> +		compatible = "kosagi,eepromoops";

Missing binding.

> +		reg = <0x56>;
> +	};
> +
> +	it6251@5c {
> +		compatible = "it,it6251";

Missing vendor prefix and binding. Also it seems there is no driver for
this upstream, so unless you are completely sure about the binding it
may be better to drop this node until there is a driver using it.

> +		reg = <0x5c>;
> +		power-supply = <&reg_display>;
> +	};
> +};
> +
> +&iomuxc {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pinctrl_hog>;
> +
> +	audmux {
> +		pinctrl_audmux_novena: audmuxgrp-novena {
> +			fsl,pins = <
> +				MX6QDL_PAD_CSI0_DAT7__AUD3_RXD  0x80000000
> +				MX6QDL_PAD_CSI0_DAT4__AUD3_TXC  0x80000000
> +				MX6QDL_PAD_CSI0_DAT5__AUD3_TXD  0x80000000
> +				MX6QDL_PAD_CSI0_DAT6__AUD3_TXFS 0x80000000
> +			>;
> +		};
> +	};
> +
> +	kpp-keys {
> +		pinctrl_kpp_novena: kppgrp-novena {
> +			fsl,pins = <
> +				/* Front panel button */
> +				MX6QDL_PAD_KEY_ROW1__KEY_ROW1 0x1b0b1
> +
> +				/* Fake column driver, not connected to anything */
> +				MX6QDL_PAD_KEY_COL1__KEY_COL1 0x1b0b1
> +			>;
> +		};
> +	};	
> +		
> +	backlight {
> +		pinctrl_backlight_novena: backlightgrp-novena {
> +			fsl,pins = <
> +				MX6QDL_PAD_DISP0_DAT8__PWM1_OUT   0x1b0b0
> +				MX6QDL_PAD_CSI0_DAT10__GPIO5_IO28 0x80000000
> +				MX6QDL_PAD_KEY_ROW4__GPIO4_IO15   0x80000000
> +			>;
> +		};
> +	};
> +
> +	ecspi3 {
> +		pinctrl_ecspi3_novena: ecspi3grp-novena {
> +			fsl,pins = <
> +				MX6QDL_PAD_DISP0_DAT2__ECSPI3_MISO 0x100b1
> +				MX6QDL_PAD_DISP0_DAT1__ECSPI3_MOSI 0x100b1
> +				MX6QDL_PAD_DISP0_DAT0__ECSPI3_SCLK 0x100b1
> +			>;
> +		};
> +	};
> +
> +	enet {
> +		pinctrl_enet_novena: enetgrp-novena {
> +			fsl,pins = <
> +				MX6QDL_PAD_ENET_MDIO__ENET_MDIO       0x1b0b0
> +				MX6QDL_PAD_ENET_MDC__ENET_MDC         0x1b0b0
> +				MX6QDL_PAD_RGMII_TXC__RGMII_TXC       0x1b020
> +				MX6QDL_PAD_RGMII_TD0__RGMII_TD0       0x1b028
> +				MX6QDL_PAD_RGMII_TD1__RGMII_TD1       0x1b028
> +				MX6QDL_PAD_RGMII_TD2__RGMII_TD2       0x1b028
> +				MX6QDL_PAD_RGMII_TD3__RGMII_TD3       0x1b028
> +				MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x1b028
> +				MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK  0x1b0b0
> +				MX6QDL_PAD_RGMII_RXC__RGMII_RXC       0x1b0b0
> +				MX6QDL_PAD_RGMII_RD0__RGMII_RD0       0x1b0b0
> +				MX6QDL_PAD_RGMII_RD1__RGMII_RD1       0x1b0b0
> +				MX6QDL_PAD_RGMII_RD2__RGMII_RD2       0x1b0b0
> +				MX6QDL_PAD_RGMII_RD3__RGMII_RD3       0x1b0b0
> +				MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b0b0
> +				MX6QDL_PAD_GPIO_16__ENET_REF_CLK      0x4001b0a8
> +
> +				/* Ethernet reset */
> +				MX6QDL_PAD_EIM_D23__GPIO3_IO23  0x80000000
> +			>;
> +		};
> +	};
> +
> +	gpio_keys {
> +		pinctrl_gpio_keys_novena: gpiokeysgrp-novena {
> +			fsl,pins = <
> +				/* User button */
> +				MX6QDL_PAD_KEY_COL4__GPIO4_IO14 0x1b0b0
> +
> +				/* PCIe Wakeup */
> +				MX6QDL_PAD_EIM_D22__GPIO3_IO22  0x1f0e0
> +
> +				/* Lid switch */
> +				MX6QDL_PAD_KEY_COL3__GPIO4_IO12 0x1b0b0
> +			>;
> +		};
> +	};
> +
> +	hdmi {
> +		pinctrl_hdmi_novena: hdmigrp-novena {
> +			fsl,pins = <
> +				MX6QDL_PAD_KEY_ROW2__HDMI_TX_CEC_LINE 0x1f8b0
> +				MX6QDL_PAD_EIM_A24__GPIO5_IO04        0x80000000
> +			>;
> +		};
> +	};
> +
> +	i2c1 {
> +		pinctrl_i2c1_novena: i2c1grp-novena {
> +			fsl,pins = <
> +				MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1
> +				MX6QDL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1
> +			>;
> +		};
> +	};
> +
> +	i2c2 {
> +		pinctrl_i2c2_novena: i2c2grp-novena {
> +			fsl,pins = <
> +				MX6QDL_PAD_EIM_EB2__I2C2_SCL 0x4001b8b1
> +				MX6QDL_PAD_EIM_D16__I2C2_SDA 0x4001b8b1
> +			>;
> +		};
> +	};
> +
> +	i2c3 {
> +		pinctrl_i2c3_novena: i2c3grp-novena {
> +			fsl,pins = <
> +				MX6QDL_PAD_EIM_D17__I2C3_SCL 0x4001b8b1
> +				MX6QDL_PAD_EIM_D18__I2C3_SDA 0x4001b8b1
> +			>;
> +		};
> +	};
> +
> +	leds {
> +		pinctrl_leds_novena: ledsgrp-novena {
> +			fsl,pins = <
> +				MX6QDL_PAD_SD1_DAT3__GPIO1_IO21 0x80000000
> +			>;
> +		};
> +	};
> +
> +	fpga {
> +		pinctrl_fpga_gpio: fpgagpiogrp-novena {
> +			fsl,pins = <
> +				/* FPGA power */
> +				MX6QDL_PAD_SD1_DAT1__GPIO1_IO17 0x80000000
> +
> +				/* Reset */
> +				MX6QDL_PAD_DISP0_DAT13__GPIO5_IO07 0x80000000
> +
> +				/* FPGA GPIOs */
> +				MX6QDL_PAD_EIM_DA0__GPIO3_IO00	0x80000000
> +				MX6QDL_PAD_EIM_DA1__GPIO3_IO01	0x80000000
> +				MX6QDL_PAD_EIM_DA2__GPIO3_IO02	0x80000000
> +				MX6QDL_PAD_EIM_DA3__GPIO3_IO03	0x80000000
> +				MX6QDL_PAD_EIM_DA4__GPIO3_IO04	0x80000000
> +				MX6QDL_PAD_EIM_DA5__GPIO3_IO05  0x80000000
> +				MX6QDL_PAD_EIM_DA6__GPIO3_IO06  0x80000000
> +				MX6QDL_PAD_EIM_DA7__GPIO3_IO07  0x80000000
> +				MX6QDL_PAD_EIM_DA8__GPIO3_IO08	0x80000000
> +				MX6QDL_PAD_EIM_DA9__GPIO3_IO09	0x80000000
> +				MX6QDL_PAD_EIM_DA10__GPIO3_IO10	0x80000000
> +				MX6QDL_PAD_EIM_DA11__GPIO3_IO11	0x80000000
> +				MX6QDL_PAD_EIM_DA12__GPIO3_IO12	0x80000000
> +				MX6QDL_PAD_EIM_DA13__GPIO3_IO13	0x80000000
> +				MX6QDL_PAD_EIM_DA14__GPIO3_IO14	0x80000000
> +				MX6QDL_PAD_EIM_DA15__GPIO3_IO15	0x80000000
> +				MX6QDL_PAD_EIM_A16__GPIO2_IO22  0x80000000
> +				MX6QDL_PAD_EIM_A17__GPIO2_IO21  0x80000000
> +				MX6QDL_PAD_EIM_A18__GPIO2_IO20  0x80000000
> +				MX6QDL_PAD_EIM_CS0__GPIO2_IO23	0x80000000
> +				MX6QDL_PAD_EIM_CS1__GPIO2_IO24	0x80000000
> +				MX6QDL_PAD_EIM_LBA__GPIO2_IO27  0x80000000
> +				MX6QDL_PAD_EIM_OE__GPIO2_IO25   0x80000000
> +				MX6QDL_PAD_EIM_RW__GPIO2_IO26   0x80000000
> +				MX6QDL_PAD_EIM_WAIT__GPIO5_IO00 0x80000000
> +				MX6QDL_PAD_EIM_BCLK__GPIO6_IO31 0x80000000
> +			>;
> +		};
> +
> +		pinctrl_fpga_eim: fpgaeimgrp-novena {
> +			fsl,pins = <
> +				/* FPGA power */
> +				MX6QDL_PAD_SD1_DAT1__GPIO1_IO17 0x80000000
> +
> +				/* Reset */
> +				MX6QDL_PAD_DISP0_DAT13__GPIO5_IO07 0x80000000
> +
> +				/* FPGA GPIOs */
> +				MX6QDL_PAD_EIM_DA0__EIM_AD00    0xb0f1
> +				MX6QDL_PAD_EIM_DA1__EIM_AD01    0xb0f1
> +				MX6QDL_PAD_EIM_DA2__EIM_AD02    0xb0f1
> +				MX6QDL_PAD_EIM_DA3__EIM_AD03    0xb0f1
> +				MX6QDL_PAD_EIM_DA4__EIM_AD04    0xb0f1
> +				MX6QDL_PAD_EIM_DA5__EIM_AD05    0xb0f1
> +				MX6QDL_PAD_EIM_DA6__EIM_AD06    0xb0f1
> +				MX6QDL_PAD_EIM_DA7__EIM_AD07    0xb0f1
> +				MX6QDL_PAD_EIM_DA8__EIM_AD08    0xb0f1
> +				MX6QDL_PAD_EIM_DA9__EIM_AD09    0xb0f1
> +				MX6QDL_PAD_EIM_DA10__EIM_AD10   0xb0f1
> +				MX6QDL_PAD_EIM_DA11__EIM_AD11   0xb0f1
> +				MX6QDL_PAD_EIM_DA12__EIM_AD12   0xb0f1
> +				MX6QDL_PAD_EIM_DA13__EIM_AD13   0xb0f1
> +				MX6QDL_PAD_EIM_DA14__EIM_AD14   0xb0f1
> +				MX6QDL_PAD_EIM_DA15__EIM_AD15   0xb0f1
> +				MX6QDL_PAD_EIM_A16__EIM_ADDR16  0xb0f1
> +				MX6QDL_PAD_EIM_A17__EIM_ADDR17  0xb0f1
> +				MX6QDL_PAD_EIM_A18__EIM_ADDR18  0xb0f1
> +				MX6QDL_PAD_EIM_CS0__EIM_CS0_B   0xb0f1
> +				MX6QDL_PAD_EIM_CS1__EIM_CS1_B   0xb0f1
> +				MX6QDL_PAD_EIM_LBA__EIM_LBA_B   0xb0f1
> +				MX6QDL_PAD_EIM_OE__EIM_OE_B     0xb0f1
> +				MX6QDL_PAD_EIM_RW__EIM_RW       0xb0f1
> +				MX6QDL_PAD_EIM_WAIT__EIM_WAIT_B 0xb0f1
> +				MX6QDL_PAD_EIM_BCLK__EIM_BCLK   0xb0f1
> +			>;
> +		};
> +	};
> +
> +	hog {
> +		pinctrl_hog: hoggrp-novena {
> +			fsl,pins = <
> +				/* Peek array power */
> +				MX6QDL_PAD_EIM_D19__GPIO3_IO19  0x80000000
> +			>;
> +		};
> +	};

What is this used for? If possible please avoid using any hogs.

> +
> +	pcie {
> +		pinctrl_pcie_novena: pciegrp-novena {
> +			fsl,pins = <
> +				/* Reset */
> +				MX6QDL_PAD_EIM_D29__GPIO3_IO29  0x80000000
> +
> +				/* Power On */
> +				MX6QDL_PAD_GPIO_17__GPIO7_IO12  0x80000000
> +
> +				/* Wifi kill */
> +				MX6QDL_PAD_EIM_A22__GPIO2_IO16  0x80000000
> +			>;
> +		};
> +	};
> +
> +	sata {
> +		pinctrl_sata_novena: satagrp-novena {
> +			fsl,pins = <
> +				MX6QDL_PAD_EIM_D30__GPIO3_IO30  0x80000000
> +			>;
> +		};
> +	};
> +
> +	senoko {
> +		pinctrl_senoko_novena: senokogrp-novena {
> +			fsl,pins = <
> +				/* Senoko IRQ line */
> +				MX6QDL_PAD_SD1_CLK__GPIO1_IO20 0x13048
> +
> +				/* Senoko reset line */
> +				MX6QDL_PAD_CSI0_VSYNC__GPIO5_IO21 0x80000000
> +			>;
> +		};
> +	};
> +
> +	sound {
> +		pinctrl_sound_novena: soundgrp-novena {
> +			fsl,pins = <
> +				/* Audio power regulator */
> +				MX6QDL_PAD_DISP0_DAT23__GPIO5_IO17 0x80000000
> +
> +				/* Headphone plug */
> +				MX6QDL_PAD_DISP0_DAT21__GPIO5_IO15 0x80000000
> +
> +				MX6QDL_PAD_GPIO_0__CCM_CLKO1       0x80000000
> +			>;
> +		};
> +	};
> +
> +	ts {
> +		pinctrl_stmpe_novena: stmpegrp-novena {
> +			fsl,pins = <
> +				/* Touchscreen interrupt */
> +				MX6QDL_PAD_DISP0_DAT19__GPIO5_IO13 0x80000000
> +			>;
> +		};
> +	};
> +
> +	uart2 {
> +		pinctrl_uart2_novena: uart2grp-novena {
> +			fsl,pins = <
> +				MX6QDL_PAD_EIM_D26__UART2_TX_DATA   0x1b0b1
> +				MX6QDL_PAD_EIM_D27__UART2_RX_DATA   0x1b0b1
> +			>;
> +		};
> +	};
> +
> +	uart3 {
> +		pinctrl_uart3_novena: uart3grp-novena {
> +			fsl,pins = <
> +				MX6QDL_PAD_EIM_D24__UART3_TX_DATA 0x1b0b1
> +				MX6QDL_PAD_EIM_D25__UART3_RX_DATA 0x1b0b1
> +			>;
> +		};
> +	};
> +	uart4 {
> +		pinctrl_uart4_novena: uart4grp-novena {
> +			fsl,pins = <
> +				MX6QDL_PAD_CSI0_DAT12__UART4_TX_DATA 0x1b0b1
> +				MX6QDL_PAD_CSI0_DAT13__UART4_RX_DATA 0x1b0b1
> +			>;
> +		};
> +	};
> +
> +	usbotg {
> +		pinctrl_usbotg_novena: usbotggrp-novena {
> +			fsl,pins = <
> +				MX6QDL_PAD_ENET_RX_ER__USB_OTG_ID 0x17059
> +			>;
> +		};
> +	};
> +
> +	usdhc2 {
> +		pinctrl_usdhc2_novena: usdhc2grp-novena {
> +			fsl,pins = <
> +				MX6QDL_PAD_SD2_CMD__SD2_CMD    0x17059
> +				MX6QDL_PAD_SD2_CLK__SD2_CLK    0x10059
> +				MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x17059
> +				MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x17059
> +				MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x17059
> +				MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x17059
> +
> +				/* Write protect */
> +				MX6QDL_PAD_GPIO_2__GPIO1_IO02   0x80000000
> +
> +				/* Card detect */
> +				MX6QDL_PAD_GPIO_4__GPIO1_IO04   0x80000000
> +			>;
> +		};
> +	};
> +
> +	usdhc3 {
> +		pinctrl_usdhc3_novena: usdhc3grp-novena {
> +			fsl,pins = <
> +				MX6QDL_PAD_SD3_CMD__SD3_CMD    0x17059
> +				MX6QDL_PAD_SD3_CLK__SD3_CLK    0x10059
> +				MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17059
> +				MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17059
> +				MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17059
> +				MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17059
> +			>;
> +		};
> +	};
> +};
> +
> +&kpp {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pinctrl_kpp_novena>;
> +	linux,keymap = <
> +		MATRIX_KEY(1, 1, KEY_CONFIG)
> +	>;
> +	wakeup;

This probably needs a prefix.

> +	status = "okay";
> +};
> +
> +&ldb {
> +	fsl,dual-channel;
> +	status = "okay";
> +	lvds-channel@0 {
> +		fsl,data-mapping = "jeida";
> +		fsl,data-width = <24>;
> +		fsl,panel = <&panel>;
> +		status = "okay";
> +	};
> +};
> +
> +&pcie {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pinctrl_pcie_novena>;
> +	reset-gpio = <&gpio3 29 GPIO_ACTIVE_HIGH>;
> +	bus-supply = <&reg_pcie>;
> +	status = "okay";
> +};
> +
> +&sata {
> +	target-supply = <&reg_sata>;
> +	fsl,transmit-level-mV = <1025>;
> +	fsl,transmit-boost-mdB = <0>;
> +	fsl,transmit-atten-16ths = <8>;
> +	status = "okay";
> +};
> +
> +&ssi1 {
> +	fsl,mode = "i2s-slave";
> +	status = "okay";
> +};
> +
> +&uart2 {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pinctrl_uart2_novena>;
> +	status = "okay";
> +};
> +
> +&uart3 {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pinctrl_uart3_novena>;
> +	status = "okay";
> +};
> +
> +&uart4 {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pinctrl_uart4_novena>;
> +	status = "okay";
> +};
> +
> +&usbotg {
> +	vbus-supply = <&reg_usb_otg_vbus>;
> +	dr_mode = "otg";
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pinctrl_usbotg_novena>;
> +	disable-over-current;
> +	status = "okay";
> +};
> +
> +&usbh1 {
> +	vbus-supply = <&swbst_reg>;
> +	status = "okay";
> +};
> +
> +&usdhc2 {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pinctrl_usdhc2_1>;
> +	pinctrl-0 = <&pinctrl_usdhc2_novena>;
> +	cd-gpios = <&gpio1 4 GPIO_ACTIVE_HIGH>;
> +	wp-gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>;
> +	status = "okay";
> +};
> +
> +&usdhc3 {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pinctrl_usdhc3_novena>;
> +	non-removable;
> +	status = "okay";
> +};


--
To unsubscribe from this list: send the line "unsubscribe linux-pci" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [DMA Engine]     [Linux Coverity]     [Linux USB]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Greybus]

  Powered by Linux