[PATCH] PCI: Don't reject 64bit mmio on 32bit/PAE mode

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Aaron reported 32bit/PAE mode, has problem with 64bit resource.

[    6.610012] pci 0000:03:00.0: reg 0x10: [mem 0x383fffc00000-0x383fffdfffff 64bit pref]
[    6.622195] pci 0000:03:00.0: reg 0x20: [mem 0x383fffe04000-0x383fffe07fff 64bit pref]
[    6.656112] pci 0000:03:00.1: reg 0x10: [mem 0x383fffa00000-0x383fffbfffff 64bit pref]
[    6.668293] pci 0000:03:00.1: reg 0x20: [mem 0x383fffe00000-0x383fffe03fff 64bit pref]
[    6.702055] pci 0000:00:02.2: PCI bridge to [bus 03-04]
[    6.706434] pci 0000:00:02.2:   bridge window [io  0x1000-0x1fff]
[    6.711783] pci 0000:00:02.2:   bridge window [mem 0x91900000-0x91cfffff]
[    6.717906] pci 0000:00:02.2: can't handle 64-bit address space for bridge

So the kernel reject 64bit mmio on pci pref bridge that is assigned by
firmware.

When 32bit PAE is enabled, we could support 64bit mmio.
but BITS_PER_LONG==64 checking could reject firmware assigned mmio that
is above 4G. On x86 32bit always has BITS_PER_LONG equal to 32.

We could use CONFIG_ARCH_DMA_ADDR_T_64BIT or dma_addr_t size checking instead.
Use dma_addr_t size checking to avoid using MARCO.

Also need to change to use dma_addr_t instead of unsigned long
for base/limit to avoid overflow.

Link: https://bugzilla.kernel.org/show_bug.cgi?id=88131
Reported-by: Aaron Ma <mapengyu@xxxxxxxxx>
Tested-by: Aaron Ma <mapengyu@xxxxxxxxx>
Signed-off-by: Yinghai Lu <yinghai@xxxxxxxxxx>

---
 drivers/pci/probe.c |   22 +++++++++++-----------
 1 file changed, 11 insertions(+), 11 deletions(-)

Index: linux-2.6/drivers/pci/probe.c
===================================================================
--- linux-2.6.orig/drivers/pci/probe.c
+++ linux-2.6/drivers/pci/probe.c
@@ -406,15 +406,15 @@ static void pci_read_bridge_mmio_pref(st
 {
 	struct pci_dev *dev = child->self;
 	u16 mem_base_lo, mem_limit_lo;
-	unsigned long base, limit;
+	dma_addr_t base, limit;
 	struct pci_bus_region region;
 	struct resource *res;
 
 	res = child->resource[2];
 	pci_read_config_word(dev, PCI_PREF_MEMORY_BASE, &mem_base_lo);
 	pci_read_config_word(dev, PCI_PREF_MEMORY_LIMIT, &mem_limit_lo);
-	base = ((unsigned long) mem_base_lo & PCI_PREF_RANGE_MASK) << 16;
-	limit = ((unsigned long) mem_limit_lo & PCI_PREF_RANGE_MASK) << 16;
+	base = ((dma_addr_t) mem_base_lo & PCI_PREF_RANGE_MASK) << 16;
+	limit = ((dma_addr_t) mem_limit_lo & PCI_PREF_RANGE_MASK) << 16;
 
 	if ((mem_base_lo & PCI_PREF_RANGE_TYPE_MASK) == PCI_PREF_RANGE_TYPE_64) {
 		u32 mem_base_hi, mem_limit_hi;
@@ -428,15 +428,15 @@ static void pci_read_bridge_mmio_pref(st
 		 * this, just assume they are not being used.
 		 */
 		if (mem_base_hi <= mem_limit_hi) {
-#if BITS_PER_LONG == 64
-			base |= ((unsigned long) mem_base_hi) << 32;
-			limit |= ((unsigned long) mem_limit_hi) << 32;
-#else
-			if (mem_base_hi || mem_limit_hi) {
-				dev_err(&dev->dev, "can't handle 64-bit address space for bridge\n");
-				return;
+			if (sizeof(dma_addr_t) < 8) {
+				if (mem_base_hi || mem_limit_hi) {
+					dev_err(&dev->dev, "can't handle 64-bit address space for bridge\n");
+					return;
+				}
+			} else  {
+				base |= ((dma_addr_t) mem_base_hi) << 32;
+				limit |= ((dma_addr_t) mem_limit_hi) << 32;
 			}
-#endif
 		}
 	}
 	if (base <= limit) {
--
To unsubscribe from this list: send the line "unsubscribe linux-pci" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [DMA Engine]     [Linux Coverity]     [Linux USB]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Greybus]

  Powered by Linux