Hi Fabio > -----Original Message----- > From: Fabio Estevam [mailto:festevam@xxxxxxxxx] > Sent: Tuesday, September 23, 2014 8:41 PM > To: Zhu Richard-R65037 > Cc: linux-pci-owner@xxxxxxxxxxxxxxx; linux-pci@xxxxxxxxxxxxxxx; Guo Shawn- > R65073; Lucas Stach; Tim Harvey > Subject: Re: [PATCH v2 1/5] PCI: imx6: enable pcie on imx6qdl sabreauto > > Hi Richard, > > On Tue, Sep 23, 2014 at 1:11 AM, Richard Zhu <r65037@xxxxxxxxxxxxx> wrote: > > - enable pcie on imx6qdl sabreauto boards. > > > > Signed-off-by: Richard Zhu <r65037@xxxxxxxxxxxxx> > > --- > > arch/arm/boot/dts/imx6qdl-sabreauto.dtsi | 4 ++++ > > 1 file changed, 4 insertions(+) > > > > diff --git a/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi > > b/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi > > index 009abd6..d6040a5 100644 > > --- a/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi > > +++ b/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi > > @@ -410,6 +410,10 @@ > > }; > > }; > > > > +&pcie { > > + status = "okay"; > > +}; > > It would be better if you could pass the PCI reset pin that comes from the > GPIO expander. [Richard] 6qdl sabreauto boards don't have the pcie reset gpio in the board design at all. Best Regards Richard Zhu ��.n��������+%������w��{.n�����{���"�)�� jg��� �����ݢj����G���� ���j:+v���w�m������w�������h�����٥
