On Thu, Jul 17, 2014 at 02:30:40PM +0530, Kishon Vijay Abraham I wrote:
> The configuration address space has so far been specified in *ranges*,
> however it should be specified in *reg* making it a platform MEM resource.
> Hence used 'platform_get_resource_*' API to get configuration address
> space in the designware driver.
>
> Cc: Jason Gunthorpe <jgunthorpe@xxxxxxxxxxxxxxxxxxxx>
> Cc: Bjorn Helgaas <bhelgaas@xxxxxxxxxx>
> Cc: Marek Vasut <marex@xxxxxxx>
> Cc: Arnd Bergmann <arnd@xxxxxxxx>
> Signed-off-by: Kishon Vijay Abraham I <kishon@xxxxxx>
> Acked-by: Mohit Kumar <mohit.kumar@xxxxxx>
> Acked-by: Jingoo Han <jg1.han@xxxxxxxxxxx>
> ---
> .../devicetree/bindings/pci/designware-pcie.txt | 4 ++++
> drivers/pci/host/pcie-designware.c | 17 +++++++++++++++--
> 2 files changed, 19 insertions(+), 2 deletions(-)
>
> diff --git a/Documentation/devicetree/bindings/pci/designware-pcie.txt b/Documentation/devicetree/bindings/pci/designware-pcie.txt
> index d0d15ee..ed0d9b9 100644
> --- a/Documentation/devicetree/bindings/pci/designware-pcie.txt
> +++ b/Documentation/devicetree/bindings/pci/designware-pcie.txt
> @@ -2,6 +2,10 @@
>
> Required properties:
> - compatible: should contain "snps,dw-pcie" to identify the core.
> +- reg: Should contain the configuration address space.
> +- reg-names: Must be "config" for the PCIe configuration space.
> + (The old way of getting the configuration address space from "ranges"
> + is deprecated and should be avoided.)
I'm not a devicetree person, so please excuse my floundering here.
There doesn't seem to be consistent usage of "reg" or "reg-names".
Here's what I found in the existing Documentation/devicetree/bindings/pci
stuff:
83xx-512x-pci.txt
- reg: should contain two address length tuples
The first is for the internal pci bridge registers
The second is for the pci config space access registers
fsl,imx6q-pcie.txt
- reg: base addresse and length of the pcie controller
host-generic-pci.txt
- reg : The Configuration Space base address and size, as accessed
from the parent bus.
nvidia,tegra20-pcie.txt
- reg: A list of physical base address and length for each set of controller
registers. Must contain an entry for each entry in the reg-names property.
- reg-names: Must include the following entries:
"pads": PADS registers
"afi": AFI registers
"cs": configuration space region
pci-rcar-gen2.txt
- reg: A list of physical regions to access the device: the first is
the operational registers for the OHCI/EHCI controllers and the
second is for the bridge configuration and control registers.
ralink,rt3883-pci.txt
- reg: specifies the physical base address of the controller and
the length of the memory mapped region.
rcar-pci.txt
- reg: base address and length of the pcie controller registers.
samsung,exynos5440-pcie.txt
- reg: base addresses and lengths of the pcie controller,
the phy controller, additional register for the phy controller.
v3-v360epc-pci.txt
- reg: should contain the base address of the V3 adapter.
So my questions are:
1) Is "reg" the right place for configuration space? I assume this is
CAM or ECAM. Only 83xx-512x-pci.txt, host-generic-pci.txt, and
nvidia,tegra20-pcie.txt mention using "reg" for config space; all the
others use "reg" for register space for the PCIe controller itself.
2) Is "config" the correct value for "reg-names"? Only
nvidia,tegra20-pcie.txt has something similar, and it wants "cs".
Should these be the same?
3) Doesn't this add a revlock (kernels with this patch require a new
device tree that adds "reg" and "reg-names"? I know both Mohit and
Jingoo acked this [1,2], so I'm just double-checking that this is
expected and desired.
Bjorn
[1] http://lkml.kernel.org/r/2CC2A0A4A178534D93D5159BF3BCB6619C5F94EFC8@xxxxxxxxxxxxxxxxxx
[2] http://marc.info/?l=linux-pci&m=140482389231290&w=2
> - #address-cells: set to <3>
> - #size-cells: set to <2>
> - device_type: set to "pci"
> diff --git a/drivers/pci/host/pcie-designware.c b/drivers/pci/host/pcie-designware.c
> index 1eaf4df..0b7b455 100644
> --- a/drivers/pci/host/pcie-designware.c
> +++ b/drivers/pci/host/pcie-designware.c
> @@ -20,6 +20,7 @@
> #include <linux/of_pci.h>
> #include <linux/pci.h>
> #include <linux/pci_regs.h>
> +#include <linux/platform_device.h>
> #include <linux/types.h>
>
> #include "pcie-designware.h"
> @@ -396,11 +397,23 @@ static const struct irq_domain_ops msi_domain_ops = {
> int __init dw_pcie_host_init(struct pcie_port *pp)
> {
> struct device_node *np = pp->dev->of_node;
> + struct platform_device *pdev = to_platform_device(pp->dev);
> struct of_pci_range range;
> struct of_pci_range_parser parser;
> + struct resource *cfg_res;
> u32 val;
> int i;
>
> + cfg_res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "config");
> + if (cfg_res) {
> + pp->config.cfg0_size = resource_size(cfg_res)/2;
> + pp->config.cfg1_size = resource_size(cfg_res)/2;
> + pp->cfg0_base = cfg_res->start;
> + pp->cfg1_base = cfg_res->start + pp->config.cfg0_size;
> + } else {
> + dev_err(pp->dev, "missing *config* reg space\n");
> + }
> +
> if (of_pci_range_parser_init(&parser, np)) {
> dev_err(pp->dev, "missing ranges property\n");
> return -EINVAL;
> @@ -433,6 +446,8 @@ int __init dw_pcie_host_init(struct pcie_port *pp)
> of_pci_range_to_resource(&range, np, &pp->cfg);
> pp->config.cfg0_size = resource_size(&pp->cfg)/2;
> pp->config.cfg1_size = resource_size(&pp->cfg)/2;
> + pp->cfg0_base = pp->cfg.start;
> + pp->cfg1_base = pp->cfg.start + pp->config.cfg0_size;
> }
> }
>
> @@ -445,8 +460,6 @@ int __init dw_pcie_host_init(struct pcie_port *pp)
> }
> }
>
> - pp->cfg0_base = pp->cfg.start;
> - pp->cfg1_base = pp->cfg.start + pp->config.cfg0_size;
> pp->mem_base = pp->mem.start;
>
> pp->va_cfg0_base = devm_ioremap(pp->dev, pp->cfg0_base,
> --
> 1.7.9.5
>
--
To unsubscribe from this list: send the line "unsubscribe linux-pci" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
