On Tue, 2014-07-22 at 13:55 -0600, Bjorn Helgaas wrote:
> On Wed, Jul 16, 2014 at 01:14:08PM -0600, Alex Williamson wrote:
> > There are numerous ATI/AMD GPUs available that report that they
> > support a PM reset (NoSoftRst-) but for which such a reset has no
> > apparent effect on the device. These devices continue to display the
> > same framebuffer across PM reset and the fan speed remains constant,
> > while a proper bus reset causes the display to lose sync and the fan
> > to reset to high speed. Create a device specific reset for ATI vendor
> > devices that tries to catch these devices and report that
> > pci_reset_function() is not supported.
> >
> > Signed-off-by: Alex Williamson <alex.williamson@xxxxxxxxxx>
> > ---
> >
> > This patch makes the series "vfio-pci: Reset improvements" far more
> > useful for users with one of these GPUs. If pci_reset_function()
> > indicates that it's supported and successful, then I have no reason
> > to resort to a bus/slot reset in the vfio-pci code. Since it doesn't
> > seem to do anything anyway, let's just forget that PM reset exists
> > for these devices.
> >
> > drivers/pci/quirks.c | 53 ++++++++++++++++++++++++++++++++++++++++++++++++++
> > 1 file changed, 53 insertions(+)
> >
> > diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c
> > index 460c354..bed9c63 100644
> > --- a/drivers/pci/quirks.c
> > +++ b/drivers/pci/quirks.c
> > @@ -3289,6 +3289,57 @@ static int reset_chelsio_generic_dev(struct pci_dev *dev, int probe)
> > return 0;
> > }
> >
> > +/*
> > + * Numerous AMD/ATI GPUs report that they're capable of PM reset (NoSoftRst-)
> > + * and pci_reset_function() reports the device as successfully reset, but
> > + * there's no apparent effect from the reset. Test for these, being sure to
> > + * allow FLR should it ever exist, and use the device specific reset to
> > + * disable any sort of function-local reset if only PM reset is available.
> > + */
> > +static int reset_ati_gpu(struct pci_dev *dev, int probe)
> > +{
> > + u16 pm_csr;
> > + u32 devcap;
> > + int af_pos;
> > +
> > + /*
> > + * VGA class devices, not on the root bus, PCI function 0 of a
> > + * multifunction device with PM capabilities
> > + */
> > + if ((dev->class >> 8) != PCI_CLASS_DISPLAY_VGA ||
> > + pci_is_root_bus(dev->bus) || PCI_FUNC(dev->devfn) ||
> > + !dev->multifunction || !dev->pm_cap)
> > + return -ENOTTY;
> > +
> > + /* PM reports NoSoftRst- */
> > + pci_read_config_word(dev, dev->pm_cap + PCI_PM_CTRL, &pm_csr);
> > + if (pm_csr & PCI_PM_CTRL_NO_SOFT_RESET)
> > + return -ENOTTY;
> > +
> > + /* No PCIe FLR */
> > + pcie_capability_read_dword(dev, PCI_EXP_DEVCAP, &devcap);
> > + if (devcap & PCI_EXP_DEVCAP_FLR)
> > + return -ENOTTY;
> > +
> > + /* No AF FLR */
> > + af_pos = pci_find_capability(dev, PCI_CAP_ID_AF);
> > + if (af_pos) {
> > + u8 af_cap;
> > +
> > + pci_read_config_byte(dev, af_pos + PCI_AF_CAP, &af_cap);
> > + if ((af_cap && PCI_AF_CAP_TP) && (af_cap && PCI_AF_CAP_FLR))
> > + return -ENOTTY;
> > + }
> > +
> > + /*
> > + * We could attempt a singleton bus/slot reset here to override
> > + * PM reset priority over these, but the devices we're interested
> > + * in are multifunction GPU + audio devices in their known configs.
> > + */
> > +
> > + return -EINVAL;
> > +}
> > +
> > #define PCI_DEVICE_ID_INTEL_82599_SFP_VF 0x10ed
> > #define PCI_DEVICE_ID_INTEL_IVB_M_VGA 0x0156
> > #define PCI_DEVICE_ID_INTEL_IVB_M2_VGA 0x0166
> > @@ -3304,6 +3355,8 @@ static const struct pci_dev_reset_methods pci_dev_reset_methods[] = {
> > reset_intel_generic_dev },
> > { PCI_VENDOR_ID_CHELSIO, PCI_ANY_ID,
> > reset_chelsio_generic_dev },
> > + { PCI_VENDOR_ID_ATI, PCI_ANY_ID,
> > + reset_ati_gpu },
>
> I'm a little confused, but maybe we just need a comment about what the
> return values from pci_dev_specific_reset() mean. Based on reading
> __pci_dev_reset(), it looks like:
>
> 0 means "I support this reset method" (if probe) or
> "I performed this reset" (if !probe),
>
> ENOTTY means "I don't support this reset method, try another one",
>
> anything else means "I don't support this reset method and don't try
> any others" (it'd be useful to know what this is good for).
>
> But reset_ati_gpu() never returns 0, so it seems like your patch makes
> it so we can never reset any ATI device at all. So I must be missing
> something.
Nope, you're not missing anything. The return value behavior is exactly
as you describe and the ATI GPUs that advertise NoSoftRst- don't appear
to do any sort of reset when moving them back from D3, so I'm
effectively trying to negate that as a viable reset option. I think
this is what the anything-else return value is meant for. I only return
"I don't support this reset method and don't try any others" after I
verify there are no other options, so if they come out with FLR support,
that would still get precedence. It's a little awkward, but I don't
know how to test whether a reset function was successful. It seems like
it would be device specific. Anyone from AMD reading the list that can
comment on what sort of reset happens on these GPUs for a D3->D0 reset?
Regardless, I don't really expect users other than device assignment,
and my testing indicates that PM reset is useless on these devices for
that. Thanks,
Alex
--
To unsubscribe from this list: send the line "unsubscribe linux-pci" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
