Hello,
On Fri, Feb 28, 2014 at 6:39 PM, Liviu Dudau <liviu@xxxxxxxxxxx> wrote:
> On Fri, Feb 28, 2014 at 06:07:05PM -0800, Tanmay Inamdar wrote:
>> Earlier email did not deliver to mailing lists because of plain text
>> setting problem on my side. Apologies for spamming. Sending it again.
>>
>> Hello Liviu,
>>
>
> Hello Tanmay,
>
>> While porting X-Gene PCIe driver to v2 series, following problems were observed.
>
> Thanks for trying it out.
>
>>
>> 1. In 'of_create_pci_host_bridge' function, bus_range is defined
>> locally. So, while walking over list of resources in bridge->windows
>> later, during X-Gene controller related setup, garbage values are
>> found in the resource. Please allocate it dynamically.
>
> Bah, sorry for that. Will fix.
>
>>
>> 2. 'domain_nr' problem is partially solved. There are still some
>> places where functions are getting invalid domain_nr. For example,
>> 'pci_alloc_child_bus' tries to get domain_nr when bridge is not
>> assigned to bus. You may want to look for all the places where
>> pci_domain_nr is used. Please see below dump -->
>>
>> pci 0001:00:00.0: scanning [bus 00-00] behind bridge, pass 1
>> ------------[ cut here ]------------
>> WARNING: CPU: 0 PID: 1 at
>> /home/tinamdar/work/open-source/linux/fs/sysfs/dir.c:52
>> sysfs_warn_dup+0x80/0xc0()
>> sysfs: cannot create duplicate filename '/class/pci_bus/0000:01'
>> Modules linked in:
>> CPU: 0 PID: 1 Comm: swapper/0 Not tainted 3.14.0-rc4+ #37
>> Call trace:
>> [<ffffffc000088140>] dump_backtrace+0x0/0x140
>> [<ffffffc000088294>] show_stack+0x14/0x20
>> [<ffffffc0004f64b0>] dump_stack+0x78/0xc4
>> [<ffffffc000096c88>] warn_slowpath_common+0x88/0xc0
>> [<ffffffc000096d10>] warn_slowpath_fmt+0x50/0x60
>> [<ffffffc0001b8260>] sysfs_warn_dup+0x80/0xc0
>> [<ffffffc0001b8718>] sysfs_do_create_link_sd.isra.2+0xf8/0x100
>> [<ffffffc0001b8740>] sysfs_create_link+0x20/0x40
>> [<ffffffc000322f5c>] device_add+0x41c/0x520
>> [<ffffffc00032307c>] device_register+0x1c/0x40
>> [<ffffffc0004f1924>] pci_add_new_bus+0x284/0x380
>> [<ffffffc0002c51a0>] pci_scan_bridge+0x4e0/0x540
>> [<ffffffc0002c52b4>] pci_scan_child_bus+0xb4/0x140
>> [<ffffffc0004f1a34>] pci_rescan_bus+0x14/0x40
>> [<ffffffc0006a12d4>] xgene_pcie_probe_bridge+0x688/0x750
>> [<ffffffc000327c64>] platform_drv_probe+0x24/0x60
>> [<ffffffc000325d74>] really_probe+0xf4/0x220
>> [<ffffffc000325fc4>] __driver_attach+0xa4/0xc0
>> [<ffffffc000323e18>] bus_for_each_dev+0x58/0xa0
>> [<ffffffc000325800>] driver_attach+0x20/0x40
>> [<ffffffc0003253d0>] bus_add_driver+0x150/0x220
>> [<ffffffc000326780>] driver_register+0x60/0x120
>> [<ffffffc000327c20>] __platform_driver_register+0x60/0x80
>> [<ffffffc0006a0c44>] xgene_pcie_driver_init+0x18/0x20
>> [<ffffffc0000814c4>] do_one_initcall+0xe4/0x160
>
> do you have your xgene_pcie_driver_init being called out of some subsys_initcall?
> If so, remove it and let the generic DT parsing code match your driver. The
I am using 'module_platform_driver' which is nothing but module_init.
> bridge should've been associated with the root bus by the time the child busses
> are scanned and allocated, unless I'm missing something obvious.
>
If you look at the implementation of 'pci_alloc_child_bus', you will
find that 'dev_set_name(&child->dev, "%04x:%02x",
pci_domain_nr(child), busnr);' is done before 'child->bridge =
get_device(&bridge->dev);' Hence pcie_domain_nr finds NULL bridge and
returns 0. That might be the problem. Please correct me if I am wrong.
> Also, can you share your version of your driver with me?
Sure. I am in the process of sending out RFC version. I will post it
in a day or two.
>
> Best regards,
> Liviu
>
>> [<ffffffc00068c938>] kernel_init_freeable+0x138/0x1d8
>> [<ffffffc0004f06b0>] kernel_init+0x10/0xe0
>> ---[ end trace 53db1c3a7fbdeb88 ]---
>> ------------[ cut here ]------------
>> WARNING: CPU: 0 PID: 1 at
>> /home/tinamdar/work/open-source/linux/drivers/pci/probe.c:711
>> pci_add_new_bus+0x36c/0x380()
>>
>> Thanks,
>> Tanmay
>>
>> On Fri, Feb 28, 2014 at 6:01 PM, Tanmay Inamdar <tinamdar@xxxxxxx> wrote:
>> > Hello Liviu,
>> >
>> > While porting X-Gene PCIe driver to v2 series, following problems were
>> > observed.
>> >
>> > 1. In 'of_create_pci_host_bridge' function, bus_range is defined locally.
>> > So, while walking over list of resources in bridge->windows later, during
>> > X-Gene controller related setup, garbage values are found in the resource.
>> > Please allocate it dynamically.
>> >
>> > 2. 'domain_nr' problem is partially solved. There are still some places
>> > where functions are getting invalid domain_nr. For example,
>> > 'pci_alloc_child_bus' tries to get domain_nr when bridge is not assigned to
>> > bus. You may want to look for all the places where pci_domain_nr is used.
>> > Please see below dump -->
>> >
>> > pci 0001:00:00.0: scanning [bus 00-00] behind bridge, pass 1
>> > ------------[ cut here ]------------
>> > WARNING: CPU: 0 PID: 1 at
>> > /home/tinamdar/work/open-source/linux/fs/sysfs/dir.c:52
>> > sysfs_warn_dup+0x80/0xc0()
>> > sysfs: cannot create duplicate filename '/class/pci_bus/0000:01'
>> > Modules linked in:
>> > CPU: 0 PID: 1 Comm: swapper/0 Not tainted 3.14.0-rc4+ #37
>> > Call trace:
>> > [<ffffffc000088140>] dump_backtrace+0x0/0x140
>> > [<ffffffc000088294>] show_stack+0x14/0x20
>> > [<ffffffc0004f64b0>] dump_stack+0x78/0xc4
>> > [<ffffffc000096c88>] warn_slowpath_common+0x88/0xc0
>> > [<ffffffc000096d10>] warn_slowpath_fmt+0x50/0x60
>> > [<ffffffc0001b8260>] sysfs_warn_dup+0x80/0xc0
>> > [<ffffffc0001b8718>] sysfs_do_create_link_sd.isra.2+0xf8/0x100
>> > [<ffffffc0001b8740>] sysfs_create_link+0x20/0x40
>> > [<ffffffc000322f5c>] device_add+0x41c/0x520
>> > [<ffffffc00032307c>] device_register+0x1c/0x40
>> > [<ffffffc0004f1924>] pci_add_new_bus+0x284/0x380
>> > [<ffffffc0002c51a0>] pci_scan_bridge+0x4e0/0x540
>> > [<ffffffc0002c52b4>] pci_scan_child_bus+0xb4/0x140
>> > [<ffffffc0004f1a34>] pci_rescan_bus+0x14/0x40
>> > [<ffffffc0006a12d4>] xgene_pcie_probe_bridge+0x688/0x750
>> > [<ffffffc000327c64>] platform_drv_probe+0x24/0x60
>> > [<ffffffc000325d74>] really_probe+0xf4/0x220
>> > [<ffffffc000325fc4>] __driver_attach+0xa4/0xc0
>> > [<ffffffc000323e18>] bus_for_each_dev+0x58/0xa0
>> > [<ffffffc000325800>] driver_attach+0x20/0x40
>> > [<ffffffc0003253d0>] bus_add_driver+0x150/0x220
>> > [<ffffffc000326780>] driver_register+0x60/0x120
>> > [<ffffffc000327c20>] __platform_driver_register+0x60/0x80
>> > [<ffffffc0006a0c44>] xgene_pcie_driver_init+0x18/0x20
>> > [<ffffffc0000814c4>] do_one_initcall+0xe4/0x160
>> > [<ffffffc00068c938>] kernel_init_freeable+0x138/0x1d8
>> > [<ffffffc0004f06b0>] kernel_init+0x10/0xe0
>> > ---[ end trace 53db1c3a7fbdeb88 ]---
>> > ------------[ cut here ]------------
>> > WARNING: CPU: 0 PID: 1 at
>> > /home/tinamdar/work/open-source/linux/drivers/pci/probe.c:711
>> > pci_add_new_bus+0x36c/0x380()
>> >
>> > Thanks,
>> > Tanmay
>> >
>> >
>> >
>> > On Fri, Feb 28, 2014 at 5:08 AM, Liviu Dudau <Liviu.Dudau@xxxxxxx> wrote:
>> >>
>> >> Several platforms use a rather generic version of parsing
>> >> the device tree to find the host bridge ranges. Move the common code
>> >> into the generic PCI code and use it to create a pci_host_bridge
>> >> structure that can be used by arch code.
>> >>
>> >> Based on early attempts by Andrew Murray to unify the code.
>> >> Used powerpc and microblaze PCI code as starting point.
>> >>
>> >> Signed-off-by: Liviu Dudau <Liviu.Dudau@xxxxxxx>
>> >>
>> >> diff --git a/drivers/pci/host-bridge.c b/drivers/pci/host-bridge.c
>> >> index 06ace62..feb8436 100644
>> >> --- a/drivers/pci/host-bridge.c
>> >> +++ b/drivers/pci/host-bridge.c
>> >> @@ -6,9 +6,13 @@
>> >> #include <linux/init.h>
>> >> #include <linux/pci.h>
>> >> #include <linux/module.h>
>> >> +#include <linux/of_address.h>
>> >> +#include <linux/of_pci.h>
>> >>
>> >> #include "pci.h"
>> >>
>> >> +static int domain_nr;
>> >> +
>> >> static struct pci_bus *find_pci_root_bus(struct pci_bus *bus)
>> >> {
>> >> while (bus->parent)
>> >> @@ -91,3 +95,133 @@ void pcibios_bus_to_resource(struct pci_bus *bus,
>> >> struct resource *res,
>> >> res->end = region->end + offset;
>> >> }
>> >> EXPORT_SYMBOL(pcibios_bus_to_resource);
>> >> +
>> >> +/**
>> >> + * pci_host_bridge_of_get_ranges - Parse PCI host bridge resources from
>> >> DT
>> >> + * @dev: device node of the host bridge having the range property
>> >> + * @resources: list where the range of resources will be added after DT
>> >> parsing
>> >> + * @io_base: pointer to a variable that will contain the physical address
>> >> for
>> >> + * the start of the I/O range.
>> >> + *
>> >> + * If this function returns an error then the @resources list will be
>> >> freed.
>> >> + *
>> >> + * This function will parse the "ranges" property of a PCI host bridge
>> >> device
>> >> + * node and setup the resource mapping based on its content. It is
>> >> expected
>> >> + * that the property conforms with the Power ePAPR document.
>> >> + *
>> >> + * Each architecture is then offered the chance of applying their own
>> >> + * filtering of pci_host_bridge_windows based on their own restrictions
>> >> by
>> >> + * calling pcibios_fixup_bridge_ranges(). The filtered list of windows
>> >> + * can then be used when creating a pci_host_bridge structure.
>> >> + */
>> >> +static int pci_host_bridge_of_get_ranges(struct device_node *dev,
>> >> + struct list_head *resources, resource_size_t *io_base)
>> >> +{
>> >> + struct resource *res;
>> >> + struct of_pci_range range;
>> >> + struct of_pci_range_parser parser;
>> >> + int err;
>> >> +
>> >> + pr_info("PCI host bridge %s ranges:\n", dev->full_name);
>> >> +
>> >> + /* Check for ranges property */
>> >> + err = of_pci_range_parser_init(&parser, dev);
>> >> + if (err)
>> >> + return err;
>> >> +
>> >> + pr_debug("Parsing ranges property...\n");
>> >> + for_each_of_pci_range(&parser, &range) {
>> >> + /* Read next ranges element */
>> >> + pr_debug("pci_space: 0x%08x pci_addr:0x%016llx ",
>> >> + range.pci_space, range.pci_addr);
>> >> + pr_debug("cpu_addr:0x%016llx size:0x%016llx\n",
>> >> + range.cpu_addr, range.size);
>> >> +
>> >> + /*
>> >> + * If we failed translation or got a zero-sized region
>> >> + * then skip this range
>> >> + */
>> >> + if (range.cpu_addr == OF_BAD_ADDR || range.size == 0)
>> >> + continue;
>> >> +
>> >> + res = kzalloc(sizeof(struct resource), GFP_KERNEL);
>> >> + if (!res) {
>> >> + err = -ENOMEM;
>> >> + goto bridge_ranges_nomem;
>> >> + }
>> >> +
>> >> + of_pci_range_to_resource(&range, dev, res);
>> >> +
>> >> + if (resource_type(res) == IORESOURCE_IO)
>> >> + *io_base = range.cpu_addr;
>> >> +
>> >> + pci_add_resource_offset(resources, res,
>> >> + res->start - range.pci_addr);
>> >> + }
>> >> +
>> >> + /* Apply architecture specific fixups for the ranges */
>> >> + pcibios_fixup_bridge_ranges(resources);
>> >> +
>> >> + return 0;
>> >> +
>> >> +bridge_ranges_nomem:
>> >> + pci_free_resource_list(resources);
>> >> + return err;
>> >> +}
>> >> +
>> >> +/**
>> >> + * of_create_pci_host_bridge - Create a PCI host bridge structure using
>> >> + * information passed in the DT.
>> >> + * @parent: device owning this host bridge
>> >> + * @ops: pci_ops associated with the host controller
>> >> + * @host_data: opaque data structure used by the host controller.
>> >> + *
>> >> + * returns a pointer to the newly created pci_host_bridge structure, or
>> >> + * NULL if the call failed.
>> >> + *
>> >> + * This function will try to obtain the host bridge domain number by
>> >> + * using of_alias_get_id() call with "pci-domain" as a stem. If that
>> >> + * fails, a local allocator will be used that will put each host bridge
>> >> + * in a new domain.
>> >> + */
>> >> +struct pci_host_bridge *
>> >> +of_create_pci_host_bridge(struct device *parent, struct pci_ops *ops,
>> >> void *host_data)
>> >> +{
>> >> + int err, domain, busno;
>> >> + struct resource bus_range;
>> >> + struct pci_bus *root_bus;
>> >> + struct pci_host_bridge *bridge;
>> >> + resource_size_t io_base;
>> >> + LIST_HEAD(res);
>> >> +
>> >> + domain = of_alias_get_id(parent->of_node, "pci-domain");
>> >> + if (domain == -ENODEV)
>> >> + domain = domain_nr++;
>> >> +
>> >> + err = of_pci_parse_bus_range(parent->of_node, &bus_range);
>> >> + if (err) {
>> >> + dev_info(parent, "No bus range for %s, using default
>> >> [0-255]\n",
>> >> + parent->of_node->full_name);
>> >> + bus_range.start = 0;
>> >> + bus_range.end = 255;
>> >> + bus_range.flags = IORESOURCE_BUS;
>> >> + }
>> >> + busno = bus_range.start;
>> >> + pci_add_resource(&res, &bus_range);
>> >> +
>> >> + /* now parse the rest of host bridge bus ranges */
>> >> + if (pci_host_bridge_of_get_ranges(parent->of_node, &res,
>> >> &io_base))
>> >> + return NULL;
>> >> +
>> >> + /* then create the root bus */
>> >> + root_bus = pci_create_root_bus_in_domain(parent, domain, busno,
>> >> + ops, host_data, &res);
>> >> + if (!root_bus)
>> >> + return NULL;
>> >> +
>> >> + bridge = to_pci_host_bridge(root_bus->bridge);
>> >> + bridge->io_base = io_base;
>> >> +
>> >> + return bridge;
>> >> +}
>> >> +EXPORT_SYMBOL_GPL(of_create_pci_host_bridge);
>> >> diff --git a/include/linux/pci.h b/include/linux/pci.h
>> >> index 1eed009..0c5e269 100644
>> >> --- a/include/linux/pci.h
>> >> +++ b/include/linux/pci.h
>> >> @@ -395,6 +395,7 @@ struct pci_host_bridge {
>> >> struct device dev;
>> >> struct pci_bus *bus; /* root bus */
>> >> int domain_nr;
>> >> + resource_size_t io_base; /* physical address for the start
>> >> of I/O area */
>> >> struct list_head windows; /* pci_host_bridge_windows */
>> >> void (*release_fn)(struct pci_host_bridge *);
>> >> void *release_data;
>> >> @@ -1786,11 +1787,23 @@ static inline struct device_node
>> >> *pci_bus_to_OF_node(struct pci_bus *bus)
>> >> return bus ? bus->dev.of_node : NULL;
>> >> }
>> >>
>> >> +struct pci_host_bridge *
>> >> +of_create_pci_host_bridge(struct device *parent, struct pci_ops *ops,
>> >> + void *host_data);
>> >> +
>> >> +void pcibios_fixup_bridge_ranges(struct list_head *resources);
>> >> #else /* CONFIG_OF */
>> >> static inline void pci_set_of_node(struct pci_dev *dev) { }
>> >> static inline void pci_release_of_node(struct pci_dev *dev) { }
>> >> static inline void pci_set_bus_of_node(struct pci_bus *bus) { }
>> >> static inline void pci_release_bus_of_node(struct pci_bus *bus) { }
>> >> +
>> >> +static inline struct pci_host_bridge *
>> >> +pci_host_bridge_of_init(struct device *parent, struct pci_ops *ops,
>> >> + void *host_data)
>> >> +{
>> >> + return NULL;
>> >> +}
>> >> #endif /* CONFIG_OF */
>> >>
>> >> #ifdef CONFIG_EEH
>> >> --
>> >> 1.9.0
>> >>
>> >>
>> >> _______________________________________________
>> >> linux-arm-kernel mailing list
>> >> linux-arm-kernel@xxxxxxxxxxxxxxxxxxx
>> >> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
>> >
>> >
>> --
>> To unsubscribe from this list: send the line "unsubscribe linux-pci" in
>> the body of a message to majordomo@xxxxxxxxxxxxxxx
>> More majordomo info at http://vger.kernel.org/majordomo-info.html
>>
>
> --
> -------------------
> .oooO
> ( )
> \ ( Oooo.
> \_) ( )
> ) /
> (_/
>
> One small step
> for me ...
>
> CONFIDENTIALITY NOTICE: This e-mail message, including any attachments,
> is for the sole use of the intended recipient(s) and contains information
> that is confidential and proprietary to Applied Micro Circuits Corporation or its subsidiaries.
> It is to be used solely for the purpose of furthering the parties' business relationship.
> All unauthorized review, use, disclosure or distribution is prohibited.
> If you are not the intended recipient, please contact the sender by reply e-mail
> and destroy all copies of the original message.
>
--
To unsubscribe from this list: send the line "unsubscribe linux-pci" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
