Earlier email did not deliver to mailing lists because of plain text
setting problem on my side. Apologies for spamming. Sending it again.
Hello Liviu,
While porting X-Gene PCIe driver to v2 series, following problems were observed.
1. In 'of_create_pci_host_bridge' function, bus_range is defined
locally. So, while walking over list of resources in bridge->windows
later, during X-Gene controller related setup, garbage values are
found in the resource. Please allocate it dynamically.
2. 'domain_nr' problem is partially solved. There are still some
places where functions are getting invalid domain_nr. For example,
'pci_alloc_child_bus' tries to get domain_nr when bridge is not
assigned to bus. You may want to look for all the places where
pci_domain_nr is used. Please see below dump -->
pci 0001:00:00.0: scanning [bus 00-00] behind bridge, pass 1
------------[ cut here ]------------
WARNING: CPU: 0 PID: 1 at
/home/tinamdar/work/open-source/linux/fs/sysfs/dir.c:52
sysfs_warn_dup+0x80/0xc0()
sysfs: cannot create duplicate filename '/class/pci_bus/0000:01'
Modules linked in:
CPU: 0 PID: 1 Comm: swapper/0 Not tainted 3.14.0-rc4+ #37
Call trace:
[<ffffffc000088140>] dump_backtrace+0x0/0x140
[<ffffffc000088294>] show_stack+0x14/0x20
[<ffffffc0004f64b0>] dump_stack+0x78/0xc4
[<ffffffc000096c88>] warn_slowpath_common+0x88/0xc0
[<ffffffc000096d10>] warn_slowpath_fmt+0x50/0x60
[<ffffffc0001b8260>] sysfs_warn_dup+0x80/0xc0
[<ffffffc0001b8718>] sysfs_do_create_link_sd.isra.2+0xf8/0x100
[<ffffffc0001b8740>] sysfs_create_link+0x20/0x40
[<ffffffc000322f5c>] device_add+0x41c/0x520
[<ffffffc00032307c>] device_register+0x1c/0x40
[<ffffffc0004f1924>] pci_add_new_bus+0x284/0x380
[<ffffffc0002c51a0>] pci_scan_bridge+0x4e0/0x540
[<ffffffc0002c52b4>] pci_scan_child_bus+0xb4/0x140
[<ffffffc0004f1a34>] pci_rescan_bus+0x14/0x40
[<ffffffc0006a12d4>] xgene_pcie_probe_bridge+0x688/0x750
[<ffffffc000327c64>] platform_drv_probe+0x24/0x60
[<ffffffc000325d74>] really_probe+0xf4/0x220
[<ffffffc000325fc4>] __driver_attach+0xa4/0xc0
[<ffffffc000323e18>] bus_for_each_dev+0x58/0xa0
[<ffffffc000325800>] driver_attach+0x20/0x40
[<ffffffc0003253d0>] bus_add_driver+0x150/0x220
[<ffffffc000326780>] driver_register+0x60/0x120
[<ffffffc000327c20>] __platform_driver_register+0x60/0x80
[<ffffffc0006a0c44>] xgene_pcie_driver_init+0x18/0x20
[<ffffffc0000814c4>] do_one_initcall+0xe4/0x160
[<ffffffc00068c938>] kernel_init_freeable+0x138/0x1d8
[<ffffffc0004f06b0>] kernel_init+0x10/0xe0
---[ end trace 53db1c3a7fbdeb88 ]---
------------[ cut here ]------------
WARNING: CPU: 0 PID: 1 at
/home/tinamdar/work/open-source/linux/drivers/pci/probe.c:711
pci_add_new_bus+0x36c/0x380()
Thanks,
Tanmay
On Fri, Feb 28, 2014 at 6:01 PM, Tanmay Inamdar <tinamdar@xxxxxxx> wrote:
> Hello Liviu,
>
> While porting X-Gene PCIe driver to v2 series, following problems were
> observed.
>
> 1. In 'of_create_pci_host_bridge' function, bus_range is defined locally.
> So, while walking over list of resources in bridge->windows later, during
> X-Gene controller related setup, garbage values are found in the resource.
> Please allocate it dynamically.
>
> 2. 'domain_nr' problem is partially solved. There are still some places
> where functions are getting invalid domain_nr. For example,
> 'pci_alloc_child_bus' tries to get domain_nr when bridge is not assigned to
> bus. You may want to look for all the places where pci_domain_nr is used.
> Please see below dump -->
>
> pci 0001:00:00.0: scanning [bus 00-00] behind bridge, pass 1
> ------------[ cut here ]------------
> WARNING: CPU: 0 PID: 1 at
> /home/tinamdar/work/open-source/linux/fs/sysfs/dir.c:52
> sysfs_warn_dup+0x80/0xc0()
> sysfs: cannot create duplicate filename '/class/pci_bus/0000:01'
> Modules linked in:
> CPU: 0 PID: 1 Comm: swapper/0 Not tainted 3.14.0-rc4+ #37
> Call trace:
> [<ffffffc000088140>] dump_backtrace+0x0/0x140
> [<ffffffc000088294>] show_stack+0x14/0x20
> [<ffffffc0004f64b0>] dump_stack+0x78/0xc4
> [<ffffffc000096c88>] warn_slowpath_common+0x88/0xc0
> [<ffffffc000096d10>] warn_slowpath_fmt+0x50/0x60
> [<ffffffc0001b8260>] sysfs_warn_dup+0x80/0xc0
> [<ffffffc0001b8718>] sysfs_do_create_link_sd.isra.2+0xf8/0x100
> [<ffffffc0001b8740>] sysfs_create_link+0x20/0x40
> [<ffffffc000322f5c>] device_add+0x41c/0x520
> [<ffffffc00032307c>] device_register+0x1c/0x40
> [<ffffffc0004f1924>] pci_add_new_bus+0x284/0x380
> [<ffffffc0002c51a0>] pci_scan_bridge+0x4e0/0x540
> [<ffffffc0002c52b4>] pci_scan_child_bus+0xb4/0x140
> [<ffffffc0004f1a34>] pci_rescan_bus+0x14/0x40
> [<ffffffc0006a12d4>] xgene_pcie_probe_bridge+0x688/0x750
> [<ffffffc000327c64>] platform_drv_probe+0x24/0x60
> [<ffffffc000325d74>] really_probe+0xf4/0x220
> [<ffffffc000325fc4>] __driver_attach+0xa4/0xc0
> [<ffffffc000323e18>] bus_for_each_dev+0x58/0xa0
> [<ffffffc000325800>] driver_attach+0x20/0x40
> [<ffffffc0003253d0>] bus_add_driver+0x150/0x220
> [<ffffffc000326780>] driver_register+0x60/0x120
> [<ffffffc000327c20>] __platform_driver_register+0x60/0x80
> [<ffffffc0006a0c44>] xgene_pcie_driver_init+0x18/0x20
> [<ffffffc0000814c4>] do_one_initcall+0xe4/0x160
> [<ffffffc00068c938>] kernel_init_freeable+0x138/0x1d8
> [<ffffffc0004f06b0>] kernel_init+0x10/0xe0
> ---[ end trace 53db1c3a7fbdeb88 ]---
> ------------[ cut here ]------------
> WARNING: CPU: 0 PID: 1 at
> /home/tinamdar/work/open-source/linux/drivers/pci/probe.c:711
> pci_add_new_bus+0x36c/0x380()
>
> Thanks,
> Tanmay
>
>
>
> On Fri, Feb 28, 2014 at 5:08 AM, Liviu Dudau <Liviu.Dudau@xxxxxxx> wrote:
>>
>> Several platforms use a rather generic version of parsing
>> the device tree to find the host bridge ranges. Move the common code
>> into the generic PCI code and use it to create a pci_host_bridge
>> structure that can be used by arch code.
>>
>> Based on early attempts by Andrew Murray to unify the code.
>> Used powerpc and microblaze PCI code as starting point.
>>
>> Signed-off-by: Liviu Dudau <Liviu.Dudau@xxxxxxx>
>>
>> diff --git a/drivers/pci/host-bridge.c b/drivers/pci/host-bridge.c
>> index 06ace62..feb8436 100644
>> --- a/drivers/pci/host-bridge.c
>> +++ b/drivers/pci/host-bridge.c
>> @@ -6,9 +6,13 @@
>> #include <linux/init.h>
>> #include <linux/pci.h>
>> #include <linux/module.h>
>> +#include <linux/of_address.h>
>> +#include <linux/of_pci.h>
>>
>> #include "pci.h"
>>
>> +static int domain_nr;
>> +
>> static struct pci_bus *find_pci_root_bus(struct pci_bus *bus)
>> {
>> while (bus->parent)
>> @@ -91,3 +95,133 @@ void pcibios_bus_to_resource(struct pci_bus *bus,
>> struct resource *res,
>> res->end = region->end + offset;
>> }
>> EXPORT_SYMBOL(pcibios_bus_to_resource);
>> +
>> +/**
>> + * pci_host_bridge_of_get_ranges - Parse PCI host bridge resources from
>> DT
>> + * @dev: device node of the host bridge having the range property
>> + * @resources: list where the range of resources will be added after DT
>> parsing
>> + * @io_base: pointer to a variable that will contain the physical address
>> for
>> + * the start of the I/O range.
>> + *
>> + * If this function returns an error then the @resources list will be
>> freed.
>> + *
>> + * This function will parse the "ranges" property of a PCI host bridge
>> device
>> + * node and setup the resource mapping based on its content. It is
>> expected
>> + * that the property conforms with the Power ePAPR document.
>> + *
>> + * Each architecture is then offered the chance of applying their own
>> + * filtering of pci_host_bridge_windows based on their own restrictions
>> by
>> + * calling pcibios_fixup_bridge_ranges(). The filtered list of windows
>> + * can then be used when creating a pci_host_bridge structure.
>> + */
>> +static int pci_host_bridge_of_get_ranges(struct device_node *dev,
>> + struct list_head *resources, resource_size_t *io_base)
>> +{
>> + struct resource *res;
>> + struct of_pci_range range;
>> + struct of_pci_range_parser parser;
>> + int err;
>> +
>> + pr_info("PCI host bridge %s ranges:\n", dev->full_name);
>> +
>> + /* Check for ranges property */
>> + err = of_pci_range_parser_init(&parser, dev);
>> + if (err)
>> + return err;
>> +
>> + pr_debug("Parsing ranges property...\n");
>> + for_each_of_pci_range(&parser, &range) {
>> + /* Read next ranges element */
>> + pr_debug("pci_space: 0x%08x pci_addr:0x%016llx ",
>> + range.pci_space, range.pci_addr);
>> + pr_debug("cpu_addr:0x%016llx size:0x%016llx\n",
>> + range.cpu_addr, range.size);
>> +
>> + /*
>> + * If we failed translation or got a zero-sized region
>> + * then skip this range
>> + */
>> + if (range.cpu_addr == OF_BAD_ADDR || range.size == 0)
>> + continue;
>> +
>> + res = kzalloc(sizeof(struct resource), GFP_KERNEL);
>> + if (!res) {
>> + err = -ENOMEM;
>> + goto bridge_ranges_nomem;
>> + }
>> +
>> + of_pci_range_to_resource(&range, dev, res);
>> +
>> + if (resource_type(res) == IORESOURCE_IO)
>> + *io_base = range.cpu_addr;
>> +
>> + pci_add_resource_offset(resources, res,
>> + res->start - range.pci_addr);
>> + }
>> +
>> + /* Apply architecture specific fixups for the ranges */
>> + pcibios_fixup_bridge_ranges(resources);
>> +
>> + return 0;
>> +
>> +bridge_ranges_nomem:
>> + pci_free_resource_list(resources);
>> + return err;
>> +}
>> +
>> +/**
>> + * of_create_pci_host_bridge - Create a PCI host bridge structure using
>> + * information passed in the DT.
>> + * @parent: device owning this host bridge
>> + * @ops: pci_ops associated with the host controller
>> + * @host_data: opaque data structure used by the host controller.
>> + *
>> + * returns a pointer to the newly created pci_host_bridge structure, or
>> + * NULL if the call failed.
>> + *
>> + * This function will try to obtain the host bridge domain number by
>> + * using of_alias_get_id() call with "pci-domain" as a stem. If that
>> + * fails, a local allocator will be used that will put each host bridge
>> + * in a new domain.
>> + */
>> +struct pci_host_bridge *
>> +of_create_pci_host_bridge(struct device *parent, struct pci_ops *ops,
>> void *host_data)
>> +{
>> + int err, domain, busno;
>> + struct resource bus_range;
>> + struct pci_bus *root_bus;
>> + struct pci_host_bridge *bridge;
>> + resource_size_t io_base;
>> + LIST_HEAD(res);
>> +
>> + domain = of_alias_get_id(parent->of_node, "pci-domain");
>> + if (domain == -ENODEV)
>> + domain = domain_nr++;
>> +
>> + err = of_pci_parse_bus_range(parent->of_node, &bus_range);
>> + if (err) {
>> + dev_info(parent, "No bus range for %s, using default
>> [0-255]\n",
>> + parent->of_node->full_name);
>> + bus_range.start = 0;
>> + bus_range.end = 255;
>> + bus_range.flags = IORESOURCE_BUS;
>> + }
>> + busno = bus_range.start;
>> + pci_add_resource(&res, &bus_range);
>> +
>> + /* now parse the rest of host bridge bus ranges */
>> + if (pci_host_bridge_of_get_ranges(parent->of_node, &res,
>> &io_base))
>> + return NULL;
>> +
>> + /* then create the root bus */
>> + root_bus = pci_create_root_bus_in_domain(parent, domain, busno,
>> + ops, host_data, &res);
>> + if (!root_bus)
>> + return NULL;
>> +
>> + bridge = to_pci_host_bridge(root_bus->bridge);
>> + bridge->io_base = io_base;
>> +
>> + return bridge;
>> +}
>> +EXPORT_SYMBOL_GPL(of_create_pci_host_bridge);
>> diff --git a/include/linux/pci.h b/include/linux/pci.h
>> index 1eed009..0c5e269 100644
>> --- a/include/linux/pci.h
>> +++ b/include/linux/pci.h
>> @@ -395,6 +395,7 @@ struct pci_host_bridge {
>> struct device dev;
>> struct pci_bus *bus; /* root bus */
>> int domain_nr;
>> + resource_size_t io_base; /* physical address for the start
>> of I/O area */
>> struct list_head windows; /* pci_host_bridge_windows */
>> void (*release_fn)(struct pci_host_bridge *);
>> void *release_data;
>> @@ -1786,11 +1787,23 @@ static inline struct device_node
>> *pci_bus_to_OF_node(struct pci_bus *bus)
>> return bus ? bus->dev.of_node : NULL;
>> }
>>
>> +struct pci_host_bridge *
>> +of_create_pci_host_bridge(struct device *parent, struct pci_ops *ops,
>> + void *host_data);
>> +
>> +void pcibios_fixup_bridge_ranges(struct list_head *resources);
>> #else /* CONFIG_OF */
>> static inline void pci_set_of_node(struct pci_dev *dev) { }
>> static inline void pci_release_of_node(struct pci_dev *dev) { }
>> static inline void pci_set_bus_of_node(struct pci_bus *bus) { }
>> static inline void pci_release_bus_of_node(struct pci_bus *bus) { }
>> +
>> +static inline struct pci_host_bridge *
>> +pci_host_bridge_of_init(struct device *parent, struct pci_ops *ops,
>> + void *host_data)
>> +{
>> + return NULL;
>> +}
>> #endif /* CONFIG_OF */
>>
>> #ifdef CONFIG_EEH
>> --
>> 1.9.0
>>
>>
>> _______________________________________________
>> linux-arm-kernel mailing list
>> linux-arm-kernel@xxxxxxxxxxxxxxxxxxx
>> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
>
>
--
To unsubscribe from this list: send the line "unsubscribe linux-pci" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
