On Thu, Feb 27, 2014 at 09:37:05AM +0800, Jingoo Han wrote: > On Thursday, February 27, 2014 10:18 AM, Jingoo Han wrote: > > On Wednesday, February 26, 2014 7:52 PM, Pratyush Anand wrote: > > > On Wed, Feb 26, 2014 at 03:47:27PM +0800, Kishon Vijay Abraham I wrote: > > > > On Wednesday 26 February 2014 12:01 PM, Ajay Khandelwal wrote: > > > > > Hi Kishon, > > > > > > > > > > On 2/21/2014 10:58 AM, Kishon Vijay Abraham I wrote: > > > > >> Thanks for the patch. I have just burnt my PCIE-to-PCI bridge card :-s Will > > > > >> test this once I get a new card. > > > > > > > > > > were you able to solve issue in PCIE-to-PCI bridge. > > > > > > > > oh yes. I was giving the total configuration space as 4k (2k for cfg0 and 2k > > > > for cfg1). But there was some problem when I write 0x800 to > > > > PCIE_ATU_LOWER_BASE. If I read back PCIE_ATU_LOWER_BASE after writing 0x800, it > > > > has 0x0. > > > > > > > > So I increased the configuration space to 8k (4k for cfg0 and 4k for cfg1). > > > > With this I write 0x1000 to PCIE_ATU_LOWER_BASE and able to enumerate devices > > > > behind a PCIE-to-PCI bridge. > > > > > > As per designware specs minimum value of CX_ATU_MIN_REGION_SIZE is 4 KB. > > > Depending on the SOC it can be configured from 4 to 64KB. So you can > > > not have an address translation unit less than 4 KB in any SOC. > > > > In the case of Exynos, the minimum value of CX_ATU_MIN_REGION_SIZE is 64KB. > > Oh! Sorry. > > I got the response from one of our hardware engineers > about 'CX_ATU_MIN_REGION_SIZE'. The minimum value of > CX_ATU_MIN_REGION_SIZE is 4KB. In case of 4 KB, you should keep configuration space size in DT as 0x2000. With the current value (0x1000) you will not have any problem in cfg0 transfer, however you will not be able to execute cfg1. To test cfg1 transaction you will need a PICe card having multiple EP below a bridge. Regards Pratyush > > Sorry for confusing you. :-( > > Best regards, > Jingoo Han > > > > > > > > > I think, it would be worth to mention this information in designware pcie binding > > > documentation. > > > > > > However I am surprised, how does it work in case of exynos. Jingoo?? > > > > I don't know. However, there was no issue at my side. > > Currently, I am testing only Ethernet cards & SATA cards. > > > > > Size of configuration space passed from DT is 0x1000 in exynos. As per > > > my understanding (and what snps specs says), this value should be > > > minimum 0x2000 in any SOC, as we divide this space equally for cfg0 and > > > cfg1 in driver. > > > > I changed 'Size of configuration space passed from DT' from 0x1000 to > > 0x2000 as below: > > > > ranges = <0x00000800 0 0x40000000 0x40000000 0 0x00002000 /* configuration space */ > > 0x81000000 0 0 0x40002000 0 0x00010000 /* downstream I/O */ > > 0x82000000 0 0x40012000 0x40012000 0 0x1ffee000>; /* non-prefetchable memory */ > > > > Then, I tested it on Exynos platform; it works properly with > > Ethernet card. > > > > Best regards, > > Jingoo Han > > > > > > > > Regards > > > Pratysuh > > > > > > > > > > > > > On SPEAr I see issues with PCIe to PCI bridge and PCIe to PCIe switch. > > > > > > > > > > Imprecise external abort is generated, providing hook for abort(similar > > > > > to imx6) solves this. > > > > > > > > But this issue seems to be different :-s > > > > > > > > Thanks > > > > Kishon -- To unsubscribe from this list: send the line "unsubscribe linux-pci" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
