Hello Kishon, > -----Original Message----- > From: Kishon Vijay Abraham I [mailto:kishon@xxxxxx] > Sent: Thursday, February 20, 2014 5:43 PM > To: Mohit KUMAR DCG; jg1.han@xxxxxxxxxxx > Cc: Ajay KHANDELWAL; Bjorn Helgaas; spear-devel; linux- > pci@xxxxxxxxxxxxxxx > Subject: Re: [PATCH 2/2] PCI:designware:Fix iATU programming for cfg1, io > and mem viewport > > Hi Mohit, > > On Thursday 20 February 2014 05:28 PM, Mohit KUMAR DCG wrote: > > Hello Kishon, > > > >> -----Original Message----- > >> From: Kishon Vijay Abraham I [mailto:kishon@xxxxxx] > >> Sent: Thursday, February 20, 2014 5:08 PM > >> To: Mohit KUMAR DCG; jg1.han@xxxxxxxxxxx > >> Cc: Ajay KHANDELWAL; Bjorn Helgaas; spear-devel; linux- > >> pci@xxxxxxxxxxxxxxx > >> Subject: Re: [PATCH 2/2] PCI:designware:Fix iATU programming for > >> cfg1, io and mem viewport > >> > >> Hi, > >> > >> On Thursday 20 February 2014 10:52 AM, Mohit Kumar wrote: > >>> This patch correct iATU programming for cfg1, io and mem viewport. > >>> Enable ATU only after configuring it. > >> > >> Does this patch actually fixes device enumeration behind a PCIe-pci > >> bridge or this is more of cleaning up the sequence? > >> > > - This patch corrects ATU programming sequence. I am not aware of any > > such issue with current driver. Pls specify which bridge do you use in your > setup and what is the problem? > > I tried with card [1], it had a PLX bridge chip. It couldn't read the configuration > space of the device connected to the PCIe-PCI bridge. > - I don’t have the mentioned card with me, but we are successfully using Lecroy PTC switch and SIL3124-2CB364 PCI-X compatible RAID card. May be Jingoo or others can also comment if they are using PCI bridge card. Thanks Mohit ��.n��������+%������w��{.n�����{���"�)�� jg��� �����ݢj����G���� ���j:+v���w�m������w�������h�����٥
