Re: [Discussion]: ARM: PCIE: Setup bridges not happening with portbus driver enabled

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Wed, Dec 4, 2013 at 11:38 PM, Jay Agarwal <jagarwal@xxxxxxxxxx> wrote:
>> On Thu, Dec 05, 2013 at 01:44:53PM +0800, Jay Agarwal wrote:
>> > I am seeing below issue on an ARM platform with CONFIG_PCIEPORTBUS
>> > enabled in kernel
>> >
>> > ISSUE:  Any memory access by devices fails
>> >
>> > FINDINGS:
>> >
>> > 1. No bridge windows like below are setup and probably this is not
>> > allowing any memory access by devices
>>
>> Does your RC driver calls pci_assign_unassigned_resources after
>> pci_common_init?
>>
> No it does not. Btw, I tried calling it but it also did not help and same problem.

Please make sure you pci_assign_unassigned_resources get called via
fs_initcall().

Thanks

Yinghai
--
To unsubscribe from this list: send the line "unsubscribe linux-pci" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [DMA Engine]     [Linux Coverity]     [Linux USB]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Greybus]

  Powered by Linux