On Thursday, August 08, 2013 03:35:13 PM Heikki Krogerus wrote: > If there is no ACPI entry for the irq, returning error from > acpi_pci_enable_irq() if the irq is 0. > > Prarit Bhargava reported an issue where he noticed that his > Dell PowerEdge 840 has buggy BIOS that does not supply ACPI > entries for irq with some devices. That lead into kernel > generating a warning "genirq: Flags mismatch irq 0...". This > will fix that issue. > > Signed-off-by: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx> > Tested-by: Prarit Bhargava <prarit@xxxxxxxxxx> Hi Bjorn, Any objections to this? Rafael > --- > drivers/acpi/pci_irq.c | 10 +++++++++- > 1 file changed, 9 insertions(+), 1 deletion(-) > > diff --git a/drivers/acpi/pci_irq.c b/drivers/acpi/pci_irq.c > index 41c5e1b..902ed1c 100644 > --- a/drivers/acpi/pci_irq.c > +++ b/drivers/acpi/pci_irq.c > @@ -419,8 +419,16 @@ int acpi_pci_irq_enable(struct pci_dev *dev) > */ > if (gsi < 0) { > u32 dev_gsi; > + > + /* Not accepting 0 as valid PCI IRQ. */ > + if (!dev->irq) { > + dev_err(&dev->dev, "PCI INT %c: no IRQ\n", > + pin_name(pin)); > + return -ENOENT; > + } > + > /* Interrupt Line values above 0xF are forbidden */ > - if (dev->irq > 0 && (dev->irq <= 0xF) && > + if ((dev->irq <= 0xF) && > (acpi_isa_irq_to_gsi(dev->irq, &dev_gsi) == 0)) { > dev_warn(&dev->dev, "PCI INT %c: no GSI - using ISA IRQ %d\n", > pin_name(pin), dev->irq); > -- I speak only for myself. Rafael J. Wysocki, Intel Open Source Technology Center. -- To unsubscribe from this list: send the line "unsubscribe linux-pci" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html