> This adds a PCI Express port driver for the on-chip PCI Express port
> present on the i.MX6 SoC. It is based on the PCI Express driver available
> in the Freescale BSP.
>
> Signed-off-by: Sean Cross <xobs@xxxxxxxxxx>
...
> +++ b/Documentation/devicetree/bindings/pci/imx6q-pcie.txt
> @@ -0,0 +1,20 @@
> +* Freescale i.MX6Q PCI Express bridge
> +
> +Example (i.MX6Q)
> + pcie: pcie@01ffc000 {
> + compatible = "fsl,imx6q-pcie";
> + reg = <0x01ffc000 0x4000>,
> + <0x01000000 0x100000>,
> + <0x01100000 0xe00000>,
> + <0x01f00000 0xfc000>;
> + interrupts = <0 122 0x04>;
> + clocks = <&clks 186>, <&clks 189>, <&clks 196>,
> + <&clks 198>, <&clks 144>;
> + clock-names = "sata_ref", "pcie_ref_125m", "lvds1_sel",
> + "lvds1", "pcie_axi";
> + power-enable = <&gpio7 12 0>;
> + pcie-reset = <&gpio3 29 0>;
Can this be replaced with regulator/reset API?
> + wake-up = <&gpio3 22 0>;
> + disable-endpoint = <&gpio2 16 0>;
> + };
---
��.n��������+%������w��{.n�����{���"�)�� jg��� �����ݢj����G���� ���j:+v���w�m������w�������h�����٥
