Hello, This series of patches introduces PCIe support for the Marvell Armada 370 and Armada XP. In the future, we plan to extend the driver to cover Kirkwood platforms, and possibly other Marvell EBU platforms as well. As we are approaching 3.10, I would now like to get formal Acked-by, or disagreements from the following maintainers/developers : * Grant Likely, as the OF maintainer, for patches 1, 2 and 3 [PATCH v5 01/17] of/pci: Provide support for parsing PCI DT ranges [PATCH v5 02/17] of/pci: Add of_pci_get_devfn() function [PATCH v5 03/17] of/pci: Add of_pci_parse_bus_range() function * Bjorn Helgaas, as the PCI maintainer, for patches 4 and 8 [PATCH v5 04/17] pci: infrastructure to add drivers in drivers/pci/host [PATCH v5 08/17] pci: PCIe driver for Marvell Armada 370/XP systems * Russell King, as the ARM maintainer, for patch 5 [PATCH v5 05/17] arm: pci: add a align_resource hook * Arnd Bergmann, Mitch Bradley and Jason Gunthorpe, for patch 8 (the PCIe driver itself), and specifically the Device Tree binding. [PATCH v5 08/17] pci: PCIe driver for Marvell Armada 370/XP systems This patch set depends on: * The arm-soc/mvebu/cleanup branch in Arnd and Olof arm-soc tree * [PATCH v3 for 3.10] Introduce a Marvell EBU MBus driver http://lists.infradead.org/pipermail/linux-arm-kernel/2013-March/156883.html For easier testing, the code has been pushed to: git://github.com/MISL-EBU-System-SW/mainline-public.git marvell-pcie-v5 (note however that this branch will no work as-is, due to completely unrelated regressions, that have in the mean-time been fixed in 3.9-rc3. At least 1b72b78fda0433a7e115bc2d78603fde65fae0e7 and e366154f70c54dee3665d1c0f780007e514412f3 must be cherry-picked) This PATCHv5 follows: * PATCHv4, sent on March, 8th 2013 * PATCHv3, sent on February, 12th 2013 * PATCHv2, sent on January, 28th 2013 * RFCv1, sent on December, 7th 2012 Changes between v4 and v5: * Rebased on top of 3.9-rc2 + the new mvebu-mbus driver (v3). * Changed the names of the PCI DT sub-nodes to match the OF specifications: they should be named pcie@DD,FF where DD is the device number and FF the function number. Requested by Mitch Bradley. * Add the device_type = "pci" property at the pcie-controller level. Requested by Mitch Bradley. * Drop patch 'of/pci: Add of_pci_get_bus() function' because it wasn't actually used in the rest of the patch series. * Updated the patch 'of/pci: Provide support for parsing PCI DT ranges property' to use the latest version proposed by Andrew Murray on the devicetree-discuss@ mailing list. Changes between v3 and v4: * Rebased on top of 3.9-rc1. * Drop patch "ARM: pci: Allow passing per-controller private data" because it was merged in 3.9. * Drop patch "lib: devres: don't enclose pcim_*() functions in CONFIG_HAS_IOPORT", because it was merged in 3.9. * Added CONFIG_PCI_MVEBU=y in mvebu_defconfig, so that the right PCI host controller driver is automatically enabled. * Instead of using the DT 'ranges' property to encode the PCIe register ranges, use a 'reg' property on the main PCIe controller DT node together with a 'reg-names' property. Suggested by Jason Gunthorpe. * Don't select PCI_SW_HOST_BRIDGE and PCI_SW_PCI_PCI_BRIDGE, they don't exist anymore. Reported by Bjorn Helgaas. * Added support for the Armada XP GP board. * Fix the 'ranges' property so that the memory range is an identity map between CPU addresses and bus addresses. Suggested by Arnd Bergmann. * Changed the 'ranges' property to have the I/O region after the memory region. * Use the new mvebu-mbus driver API to create/remove address decoding windows when needed. This remove the need to include <mach/addr-map.h>. Requested by Arnd Bergmann. * Include directly into the driver the few common PCIe functions we were using from arch/arm/plat-orion/pcie.c. This allows to remove the inclusion of <plat/pcie.h>. Requested by Arnd Bergmann. * Directly set up the address decoding windows when the memory base/limit and I/O base/limit are configured in the PCI-to-PCI bridge instead of relying on the memory and I/O accesses being enabled in the PCI_COMMAND register. Suggested by Bjorn Helgaas. * Added some comments on top of the calculations of the I/O base/limit and memory base/limit. Suggested by Arnd Bergmann. * Changed a bit the way the "realio" resource is created, from suggestions given by Arnd Bergmann. * Updated the Device Tree binding documentation. Reported by Jason Gunthorpe. * Instead of using "marvell,armada-370-xp-pcie" as the DT compatible string, use two separate compatible strings: "marvell,armada-370-pcie" and "marvell,armada-xp-pcie". For now, the driver does the same thing for both. Changes between v2 and v3: * Use of_irq_map_pci() instead of of_irq_map_raw(), as suggested by Andrew Murray. In order to do this, we moved the interrupt-map and interrupt-map-mask DT properties from the main PCIe controller node to the DT subnodes representing each PCIe interface. * Remove the usage of the emulated host bridge. * Move the emulated PCI-to-PCI bridge code into the Marvell PCI driver itself, in order to allow a tighter integration. Suggested by Bjorn Helgaas and Jason Gunthorpe. * Make the allocation of address decoding windows dynamic: it's when memory accesses or I/O accesses are enabled at the PCI-to-PCI bridge level that we allocate and setup the corresponding address decoding window. Requested by Bjorn Helgaas. * Fixed the implementation of I/O accesses to use I/O addresses that fall within the normal IO_SPACE_LIMIT. This required using the "remap" functionality of address decoding windows, and therefore some changes in the address decoding window allocator. Follows a long discussion about I/O accesses. * Set up a correct bus number in the configuration of the PCIe interfaces so that we don't have to fake bus numbers anymore. Requested by Jason Gunthorpe. * Fix the of_pci_get_devfn() implementation according to Stephen Warren's comment. * Use CFLAGS_ instead of ccflags to add the mach-mvebu and plat-orion include paths when building the pci-mvebu driver. This ensures that the include paths are only added when building this specific driver. Requested by Stephen Warren. * Fix the ->resource_align() to only apply on bus 0 (the one on which the emulated PCI-to-PCI bridges sit), and to request an alignment on the size of the window (and not only 64 KB for I/O windows and 1 MB for memory windows). * Clarified the commit log of "clk: mvebu: create parent-child relation for PCIe clocks on Armada 370" Thanks, Thomas Andrew Murray (1): of/pci: Provide support for parsing PCI DT ranges property Thierry Reding (2): of/pci: Add of_pci_get_devfn() function of/pci: Add of_pci_parse_bus_range() function Thomas Petazzoni (14): pci: infrastructure to add drivers in drivers/pci/host arm: pci: add a align_resource hook clk: mvebu: create parent-child relation for PCIe clocks on Armada 370 clk: mvebu: add more PCIe clocks for Armada XP pci: PCIe driver for Marvell Armada 370/XP systems arm: mvebu: PCIe support is now available on mvebu arm: mvebu: add PCIe Device Tree informations for Armada 370 arm: mvebu: add PCIe Device Tree informations for Armada XP arm: mvebu: PCIe Device Tree informations for OpenBlocks AX3-4 arm: mvebu: PCIe Device Tree informations for Armada XP DB arm: mvebu: PCIe Device Tree informations for Armada 370 Mirabox arm: mvebu: PCIe Device Tree informations for Armada 370 DB arm: mvebu: PCIe Device Tree informations for Armada XP GP arm: mvebu: update defconfig with PCI and USB support .../devicetree/bindings/pci/mvebu-pci.txt | 201 +++++ arch/arm/boot/dts/armada-370-db.dts | 17 + arch/arm/boot/dts/armada-370-mirabox.dts | 16 + arch/arm/boot/dts/armada-370.dtsi | 45 + arch/arm/boot/dts/armada-xp-db.dts | 33 + arch/arm/boot/dts/armada-xp-gp.dts | 21 + arch/arm/boot/dts/armada-xp-mv78230.dtsi | 98 +++ arch/arm/boot/dts/armada-xp-mv78260.dtsi | 113 +++ arch/arm/boot/dts/armada-xp-mv78460.dtsi | 170 ++++ arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts | 9 + arch/arm/configs/mvebu_defconfig | 3 + arch/arm/include/asm/mach/pci.h | 11 + arch/arm/kernel/bios32.c | 6 + arch/arm/mach-mvebu/Kconfig | 2 + arch/microblaze/pci/pci-common.c | 106 +-- arch/mips/pci/pci.c | 44 +- arch/powerpc/kernel/pci-common.c | 93 +- drivers/clk/mvebu/clk-gating-ctrl.c | 18 +- drivers/of/address.c | 54 ++ drivers/of/of_pci.c | 59 +- drivers/pci/Kconfig | 2 + drivers/pci/Makefile | 3 + drivers/pci/host/Kconfig | 8 + drivers/pci/host/Makefile | 4 + drivers/pci/host/pci-mvebu.c | 927 ++++++++++++++++++++ include/linux/of_address.h | 31 + include/linux/of_pci.h | 2 + 27 files changed, 1912 insertions(+), 184 deletions(-) create mode 100644 Documentation/devicetree/bindings/pci/mvebu-pci.txt create mode 100644 drivers/pci/host/Kconfig create mode 100644 drivers/pci/host/Makefile create mode 100644 drivers/pci/host/pci-mvebu.c -- 1.7.9.5 -- To unsubscribe from this list: send the line "unsubscribe linux-pci" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
