On 03/07/13 17:30, Bjorn Helgaas wrote:
On Thu, Mar 7, 2013 at 9:28 AM, Chris Clayton <chris2553@xxxxxxxxxxxxxx> wrote:
On 03/06/13 23:45, Bjorn Helgaas wrote:
On Thu, Jan 31, 2013 at 5:09 AM, Chris Clayton <chris2553@xxxxxxxxxxxxxx>
wrote:
My usb3 expresscard device has arrived and I get an oops with that too,
if I
remove it without unloading the driver first. I guess it shouldn't be a
surprise that the driver isn't expecting the device to disappear.
As I mentioned, I have some trouble with the WinTV-HVR-1400 card, which
sometimes pops out again, if I push it into the slot too hard (but I'm
geeting better at that with practice). So what I've done (with the usb3
card
too) to avoid the oopsen is blacklist the driver in
/etc/modprobe.d/blacklist.conf and then load them when I'm sure the card
is
properly inserted. Not exactly hotplug, but at least I don't have to
reboot
because of an oops- and it's not something I'm doing several times an
hour.
Hi Chris,
What's the current state of this? It sounds to me like it still
doesn't work out of the box. Having to blacklist the driver and load
it manually is a completely unacceptable user experience. If you have
to manually choose acpiphp over pciehp, that is also unacceptable.
So if you're still limping along with hacky workarounds like this, I'd
like to pursue this more and see if we can't figure out a better
solution.
Bjorn
Hi Bjorn,
If I unblacklist the driver, insert the HVR-1400 card and then remove it, I
still get the oops. This is with kernel 3.8.2. I no longer get the oops with
the USB3 card, but I don't know how or when that was fixed.
I stopped working on it when, after finding the workaround to the oops and
then spending many many hours figuring out a fix so that scandvb would find
some channels, no one on the linux-media list seemed interested in the fix.
On top of that, even though scanning now finds all the available channels,
the quality of the TV picture and sound is very poor indeed. I didn't want
to bang my head against the linux-media wall again, so I abandoned the card
and now use a USB TV stick, which gives is much better results than the
card. It's a pity because the card also supports an analog signal which
means I can watch the RF output from my satellite box, which I have piped
around the house. Anyway, the linux-media folks are not your problem and if
I want to watch satellite TV on my laptop, I can make one of my rare visits
to Windows (where the picture and sound are good).
Having said (ranted?) all that, I would be more than happy to help fix the
oops. After I first reported it, I realised that I didn't have a hotplug
driver loaded. With help from Yijing Wang, we eventually managed to get the
card recognised and drivers loaded when it is inserted. That doesn't help
with the oops, though. I now have the pciehp driver compiled statically onto
the kernel (and pass pcie_ports=native to the kernel), but removing the card
with the cx23885 driver loaded always results in an oops. I originally
reported this to the linux-media list because functions from the cx23885
driver are at the top of the call trace, but only Martin responded with some
hotplug-related suggestions, which is what swung discussion the way of the
linux-pci list.
OK. There are several potential problems here.
1) The change to make scandvb find some channels. This is probably a
cx23885 or linux-media issue, and I can't help with that.
2) TV picture/sound quality problem. Again, probably a cx23885 driver
issue, and I can't help with that.
I'm not going to use the card and I don't have the time (or patience) to
submit the change again.
3) HVR-1400 not being recognized when inserted. This is a PCI hotplug
issue, and I *can* help with this. I don't know what your hardware
is, but in general, pciehp should take care of this. If it doesn't,
or if you have to use an argument like "pcie_ports=native", we should
fix this.
4) Oops when removing HVR-1400 ExpressCard. From the backtrace, I
assume the cx23885 driver is still bound to the device when you remove
the card. It'd be nice if the driver could handle the device going
away, but I'm not surprised that it doesn't.
Nor am I, but it's hardly plug and play, is it. With Windows I can plug
and unplug the card at will without crashing the system.
If you unbind the driver before removing the card, the oops should not
happen. You should be able to do this manually with something like
this (with the address of your device, of course):
# echo 0000:05:00.0 > /sys/bus/pci/drivers/cx23885/unbind
It would also be nice if there were a good user interface for doing
this, e.g., something like "Safely remove hardware" on Windows. But I
don't know what it is on Linux.
Thanks, I'll look into that and see if I can write a little panel applet
to provide a UI.
So 3) is the thing I might be able to help with. If there's still a
problem here (and even having to boot with an argument is a problem),
let's start by collecting complete dmesg logs, with and without your
"pcie_ports" option. Boot without the card installed, then insert it
and remove it. If you can use something like v3.9-rc1 with
CONFIG_HOTPLUG_PCI_PCIE=y, that would be ideal.
OK, I've gathered these logs using a kernel built from a pull of Linus'
tree this afternoon (v3.9-rc1-108-g9f22578). Also, the cx23885 driver is
still blacklisted to avoid unnecessary noise and the chance of an oops
if the card springs out again when I insert it. The driver does load if
it's not blacklisted (and the pcie_ports=native option is present).
The two logs are attached. As you will see, nothing at all happens when
the pcie_ports=native option is absent. The nf_conntrack message is
normally the last one from a normal boot.
Chris
Bjorn
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.9.0-rc1+ (chris@laptop) (gcc version 4.7.3 20130302 (prerelease) (GCC) ) #34 SMP PREEMPT Thu Mar 7 19:33:03 GMT 2013
[ 0.000000] Disabled fast string operations
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009d7ff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009d800-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000dab0efff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000dab0f000-0x00000000dad4efff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000dad4f000-0x00000000dad6efff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000dad6f000-0x00000000daf1efff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000daf1f000-0x00000000daf9efff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000daf9f000-0x00000000daffefff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000dafff000-0x00000000daffffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000db000000-0x00000000df9fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed10000-0x00000000fed19fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ffd80000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000021fdfffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.6 present.
[ 0.000000] DMI: FUJITSU LIFEBOOK AH531/FJNBB0F, BIOS 1.30 05/28/2012
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] e820: last_pfn = 0x21fe00 max_arch_pfn = 0x1000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0FFC00000 mask FFFC00000 write-protect
[ 0.000000] 1 base 000000000 mask F80000000 write-back
[ 0.000000] 2 base 080000000 mask FC0000000 write-back
[ 0.000000] 3 base 0C0000000 mask FE0000000 write-back
[ 0.000000] 4 base 0DC000000 mask FFC000000 uncachable
[ 0.000000] 5 base 0DB000000 mask FFF000000 uncachable
[ 0.000000] 6 base 100000000 mask F00000000 write-back
[ 0.000000] 7 base 200000000 mask FE0000000 write-back
[ 0.000000] 8 base 21FE00000 mask FFFE00000 uncachable
[ 0.000000] 9 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] initial memory mapped: [mem 0x00000000-0x01bfffff]
[ 0.000000] Base memory trampoline at [c0099000] 99000 size 16384
[ 0.000000] reserving inaccessible SNB gfx pages
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
[ 0.000000] init_memory_mapping: [mem 0x37a00000-0x37bfdfff]
[ 0.000000] [mem 0x37a00000-0x37bfdfff] page 4k
[ 0.000000] BRK [0x01628000, 0x01628fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x34000000-0x379fffff]
[ 0.000000] [mem 0x34000000-0x379fffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x00100000-0x33ffffff]
[ 0.000000] [mem 0x00100000-0x001fffff] page 4k
[ 0.000000] [mem 0x00200000-0x33ffffff] page 2M
[ 0.000000] ACPI: RSDP 000f00e0 00024 (v02 FUJ )
[ 0.000000] ACPI: XSDT daffe120 00084 (v01 FUJ PC 00000001 FUJ 00000001)
[ 0.000000] ACPI: FACP daff0000 000F4 (v03 FUJ PC 00000001 PTL 00000001)
[ 0.000000] ACPI: DSDT daff3000 0794A (v02 FUJ FJNBB0F 00000000 INTL 20061109)
[ 0.000000] ACPI: FACS daf3d000 00040
[ 0.000000] ACPI: SLIC daffd000 00176 (v01 FUJ PC 00000001 FUJ 00000001)
[ 0.000000] ACPI: SSDT daffb000 01068 (v01 FUJ PtidDevc 00001000 INTL 20061109)
[ 0.000000] ACPI: ASF! daff2000 000A5 (v32 FUJ PC 00000001 PTL 00000001)
[ 0.000000] ACPI: HPET dafef000 00038 (v01 FUJ PC 00000001 PTL 00000001)
[ 0.000000] ACPI: APIC dafee000 00098 (v01 FUJ PC 00000001 PTL 00000001)
[ 0.000000] ACPI: MCFG dafed000 0003C (v01 FUJ PC 00000001 PTL 00000001)
[ 0.000000] ACPI: SSDT dafec000 007C2 (v01 PmRef Cpu0Ist 00003000 INTL 20061109)
[ 0.000000] ACPI: SSDT dafeb000 00996 (v01 PmRef CpuPm 00003000 INTL 20061109)
[ 0.000000] ACPI: UEFI dafea000 0003E (v01 FUJ PC 00000001 PTL 00000001)
[ 0.000000] ACPI: UEFI dafe9000 00042 (v01 PTL COMBUF 00000001 PTL 00000001)
[ 0.000000] ACPI: UEFI dafe8000 00242 (v01 FUJ PC 00000001 PTL 00000001)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] 7810MB HIGHMEM available.
[ 0.000000] 891MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 37bfe000
[ 0.000000] low ram: 0 - 37bfe000
[ 0.000000] BRK [0x01629000, 0x01629fff] PGTABLE
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00001000-0x00ffffff]
[ 0.000000] Normal [mem 0x01000000-0x37bfdfff]
[ 0.000000] HighMem [mem 0x37bfe000-0x1fdfffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00001000-0x0009cfff]
[ 0.000000] node 0: [mem 0x00100000-0xdab0efff]
[ 0.000000] node 0: [mem 0xdafff000-0xdaffffff]
[ 0.000000] node 0: [mem 0x00000000-0x1fdfffff]
[ 0.000000] On node 0 totalpages: 2074796
[ 0.000000] free_area_init_node: node 0, pgdat c1569140, node_mem_map f37fe020
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3996 pages, LIFO batch:0
[ 0.000000] Normal zone: 1752 pages used for memmap
[ 0.000000] Normal zone: 224254 pages, LIFO batch:31
[ 0.000000] HighMem zone: 15621 pages used for memmap
[ 0.000000] HighMem zone: 1846546 pages, LIFO batch:31
[ 0.000000] Using APIC driver default
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x00] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x00] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x00] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x00] disabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x0e] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 14, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a301 base: 0xfed00000
[ 0.000000] smpboot: 8 Processors exceeds NR_CPUS limit of 4
[ 0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: 000000000009d000 - 000000000009e000
[ 0.000000] PM: Registered nosave memory: 000000000009e000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
[ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
[ 0.000000] e820: [mem 0xdfa00000-0xf7ffffff] available for PCI devices
[ 0.000000] setup_percpu: NR_CPUS:4 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 12 pages/cpu @f37bc000 s26496 r0 d22656 u49152
[ 0.000000] pcpu-alloc: s26496 r0 d22656 u49152 alloc=12*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2073012
[ 0.000000] Kernel command line: root=/dev/sda5 pcie_ports=native ro resume=/dev/sda6
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] __ex_table already sorted, skipping sort
[ 0.000000] Initializing CPU#0
[ 0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340
[ 0.000000] Initializing HighMem for node 0 (00037bfe:0021fe00)
[ 0.000000] Memory: 8221536k/8910848k available (4096k kernel code, 77644k reserved, 1466k data, 376k init, 7386180k highmem)
[ 0.000000] virtual kernel memory layout:
fixmap : 0xfff67000 - 0xfffff000 ( 608 kB)
pkmap : 0xffc00000 - 0xffe00000 (2048 kB)
vmalloc : 0xf83fe000 - 0xffbfe000 ( 120 MB)
lowmem : 0xc0000000 - 0xf7bfe000 ( 891 MB)
.init : 0xc156f000 - 0xc15cd000 ( 376 kB)
.data : 0xc1400258 - 0xc156eb80 (1466 kB)
.text : 0xc1000000 - 0xc1400258 (4096 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] Dump stacks of tasks blocking RCU-preempt GP.
[ 0.000000] NR_IRQS:2304 nr_irqs:712 16
[ 0.000000] CPU 0 irqstacks, hard=f3008000 soft=f300a000
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.004000] tsc: Detected 2494.124 MHz processor
[ 0.000001] Calibrating delay loop (skipped), value calculated using timer frequency.. 4988.24 BogoMIPS (lpj=9976496)
[ 0.000117] pid_max: default: 32768 minimum: 301
[ 0.000198] Mount-cache hash table entries: 512
[ 0.000430] Disabled fast string operations
[ 0.000485] CPU: Physical Processor ID: 0
[ 0.000539] CPU: Processor Core ID: 0
[ 0.000596] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[ 0.000674] mce: CPU supports 7 MCE banks
[ 0.000736] CPU0: Thermal monitoring enabled (TM1)
[ 0.000800] Last level iTLB entries: 4KB 512, 2MB 0, 4MB 0
Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32
tlb_flushall_shift: 5
[ 0.001003] Freeing SMP alternatives: 16k freed
[ 0.001062] ACPI: Core revision 20130117
[ 0.005472] ACPI: All ACPI Tables successfully acquired
[ 0.005924] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.006395] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.046178] smpboot: CPU0: Intel(R) Core(TM) i5-2450M CPU @ 2.50GHz (fam: 06, model: 2a, stepping: 07)
[ 0.046373] TSC deadline timer enabled
[ 0.046381] Performance Events: PEBS fmt1+, 16-deep LBR, SandyBridge events, Intel PMU driver.
[ 0.046613] perf_event_intel: PEBS disabled due to CPU errata, please upgrade microcode
[ 0.046674] ... version: 3
[ 0.046728] ... bit width: 48
[ 0.046783] ... generic registers: 4
[ 0.046838] ... value mask: 0000ffffffffffff
[ 0.046895] ... max period: 000000007fffffff
[ 0.046951] ... fixed-purpose events: 3
[ 0.047006] ... event mask: 000000070000000f
[ 0.062595] CPU 1 irqstacks, hard=f30b2000 soft=f30b4000
[ 0.072953] Initializing CPU#1
[ 0.073724] Disabled fast string operations
[ 0.062595] smpboot: Booting Node 0, Processors #1
[ 0.075909] CPU 2 irqstacks, hard=f30d2000 soft=f30d4000
[ 0.086360] Initializing CPU#2
[ 0.087149] Disabled fast string operations
[ 0.076068] #2
[ 0.089325] CPU 3 irqstacks, hard=f30de000 soft=f30e8000
[ 0.089485] #3 OK
[ 0.099786] Initializing CPU#3
[ 0.100576] Disabled fast string operations
[ 0.102692] Brought up 4 CPUs
[ 0.102856] smpboot: Total of 4 processors activated (19952.99 BogoMIPS)
[ 0.105542] devtmpfs: initialized
[ 0.105801] PM: Registering ACPI NVS region [mem 0xdad4f000-0xdad6efff] (131072 bytes)
[ 0.105865] PM: Registering ACPI NVS region [mem 0xdaf1f000-0xdaf9efff] (524288 bytes)
[ 0.105992] NET: Registered protocol family 16
[ 0.106176] ACPI: bus type pci registered
[ 0.106270] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[ 0.106346] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
[ 0.106405] PCI: Using MMCONFIG for extended config space
[ 0.106462] PCI: Using configuration type 1 for base access
[ 0.107558] bio: create slab <bio-0> at 0
[ 0.107658] ACPI: Added _OSI(Module Device)
[ 0.107714] ACPI: Added _OSI(Processor Device)
[ 0.107769] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.107826] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.109096] ACPI: EC: Look up EC in DSDT
[ 0.110340] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.122765] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[ 0.123178] ACPI: SSDT dad4d718 0067C (v01 PmRef Cpu0Cst 00003001 INTL 20061109)
[ 0.123630] ACPI: Dynamic OEM Table Load:
[ 0.123764] ACPI: SSDT (null) 0067C (v01 PmRef Cpu0Cst 00003001 INTL 20061109)
[ 0.134969] ACPI: SSDT daf0fa98 00303 (v01 PmRef ApIst 00003000 INTL 20061109)
[ 0.135448] ACPI: Dynamic OEM Table Load:
[ 0.135581] ACPI: SSDT (null) 00303 (v01 PmRef ApIst 00003000 INTL 20061109)
[ 0.146869] ACPI: SSDT dad4cd98 00119 (v01 PmRef ApCst 00003000 INTL 20061109)
[ 0.147313] ACPI: Dynamic OEM Table Load:
[ 0.147446] ACPI: SSDT (null) 00119 (v01 PmRef ApCst 00003000 INTL 20061109)
[ 0.159408] ACPI: Interpreter enabled
[ 0.159467] ACPI: (supports S0ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20130117/hwxface-568)
[ 0.159667] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20130117/hwxface-568)
[ 0.159823] S3 S4 S5)
[ 0.159999] ACPI: Using IOAPIC for interrupt routing
[ 0.160078] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.164578] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
[ 0.164666] \_SB_.PCI0:_OSC invalid UUID
[ 0.164666] _OSC request data:1 8 1f
[ 0.164693] \_SB_.PCI0:_OSC invalid UUID
[ 0.164694] _OSC request data:1 f 1f
[ 0.164696] acpi PNP0A08:00: ACPI _OSC support notification failed, disabling PCIe ASPM
[ 0.164759] acpi PNP0A08:00: Unable to request _OSC control (_OSC support mask: 0x08)
[ 0.165277] PCI host bridge to bus 0000:00
[ 0.165334] pci_bus 0000:00: root bus resource [bus 00-3e]
[ 0.165391] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
[ 0.165450] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
[ 0.166053] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[ 0.166113] pci_bus 0000:00: root bus resource [mem 0xdfa00000-0xfeafffff]
[ 0.166173] pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed44fff]
[ 0.166239] pci 0000:00:00.0: [8086:0104] type 00 class 0x060000
[ 0.166311] pci 0000:00:02.0: [8086:0126] type 00 class 0x030000
[ 0.166320] pci 0000:00:02.0: reg 10: [mem 0xf0000000-0xf03fffff 64bit]
[ 0.166326] pci 0000:00:02.0: reg 18: [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.166330] pci 0000:00:02.0: reg 20: [io 0x4000-0x403f]
[ 0.166417] pci 0000:00:16.0: [8086:1c3a] type 00 class 0x078000
[ 0.166441] pci 0000:00:16.0: reg 10: [mem 0xf1605000-0xf160500f 64bit]
[ 0.166502] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[ 0.166577] pci 0000:00:1a.0: [8086:1c2d] type 00 class 0x0c0320
[ 0.166598] pci 0000:00:1a.0: reg 10: [mem 0xf160a000-0xf160a3ff]
[ 0.166670] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[ 0.166705] pci 0000:00:1a.0: System wakeup disabled by ACPI
[ 0.166794] pci 0000:00:1b.0: [8086:1c20] type 00 class 0x040300
[ 0.166813] pci 0000:00:1b.0: reg 10: [mem 0xf1600000-0xf1603fff 64bit]
[ 0.166867] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.166917] pci 0000:00:1c.0: [8086:1c10] type 01 class 0x060400
[ 0.167014] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.167078] pci 0000:00:1c.3: [8086:1c16] type 01 class 0x060400
[ 0.167177] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[ 0.167216] pci 0000:00:1c.3: System wakeup disabled by ACPI
[ 0.167301] pci 0000:00:1c.5: [8086:1c1a] type 01 class 0x060400
[ 0.167362] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
[ 0.167393] pci 0000:00:1c.5: System wakeup disabled by ACPI
[ 0.167482] pci 0000:00:1d.0: [8086:1c26] type 00 class 0x0c0320
[ 0.167503] pci 0000:00:1d.0: reg 10: [mem 0xf1609000-0xf16093ff]
[ 0.167576] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 0.167607] pci 0000:00:1d.0: System wakeup disabled by ACPI
[ 0.167694] pci 0000:00:1f.0: [8086:1c49] type 00 class 0x060100
[ 0.167827] pci 0000:00:1f.2: [8086:1c03] type 00 class 0x010601
[ 0.167845] pci 0000:00:1f.2: reg 10: [io 0x4088-0x408f]
[ 0.167853] pci 0000:00:1f.2: reg 14: [io 0x4094-0x4097]
[ 0.167861] pci 0000:00:1f.2: reg 18: [io 0x4080-0x4087]
[ 0.167868] pci 0000:00:1f.2: reg 1c: [io 0x4090-0x4093]
[ 0.167876] pci 0000:00:1f.2: reg 20: [io 0x4060-0x407f]
[ 0.167884] pci 0000:00:1f.2: reg 24: [mem 0xf1608000-0xf16087ff]
[ 0.167916] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.167968] pci 0000:00:1f.3: [8086:1c22] type 00 class 0x0c0500
[ 0.167982] pci 0000:00:1f.3: reg 10: [mem 0xf1604000-0xf16040ff 64bit]
[ 0.168003] pci 0000:00:1f.3: reg 20: [io 0xefa0-0xefbf]
[ 0.168298] pci 0000:01:00.0: [8086:008a] type 00 class 0x028000
[ 0.168462] pci 0000:01:00.0: reg 10: [mem 0xf1500000-0xf1501fff 64bit]
[ 0.169019] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold
[ 0.169145] pci 0000:01:00.0: System wakeup disabled by ACPI
[ 0.174954] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 0.175018] pci 0000:00:1c.0: bridge window [mem 0xf1500000-0xf15fffff]
[ 0.175107] pci 0000:00:1c.3: PCI bridge to [bus 02-06]
[ 0.175168] pci 0000:00:1c.3: bridge window [io 0x3000-0x3fff]
[ 0.175173] pci 0000:00:1c.3: bridge window [mem 0xf0d00000-0xf14fffff]
[ 0.175181] pci 0000:00:1c.3: bridge window [mem 0xf0400000-0xf0bfffff 64bit pref]
[ 0.175256] pci 0000:07:00.0: [10ec:8168] type 00 class 0x020000
[ 0.175277] pci 0000:07:00.0: reg 10: [io 0x2000-0x20ff]
[ 0.175311] pci 0000:07:00.0: reg 18: [mem 0xf0c04000-0xf0c04fff 64bit pref]
[ 0.175332] pci 0000:07:00.0: reg 20: [mem 0xf0c00000-0xf0c03fff 64bit pref]
[ 0.175392] pci 0000:07:00.0: supports D1 D2
[ 0.175393] pci 0000:07:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.175433] pci 0000:07:00.0: System wakeup disabled by ACPI
[ 0.182860] pci 0000:00:1c.5: PCI bridge to [bus 07]
[ 0.182947] pci 0000:00:1c.5: bridge window [io 0x2000-0x2fff]
[ 0.182955] pci 0000:00:1c.5: bridge window [mem 0xf0c00000-0xf0cfffff 64bit pref]
[ 0.182976] pci_bus 0000:00: on NUMA node 0
[ 0.182977] ACPI _OSC control for PCIe not granted, disabling ASPM
[ 0.183351] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 10 *11 12 14 15)
[ 0.183929] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 10 *11 12 14 15)
[ 0.184504] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 *10 11 12 14 15)
[ 0.185080] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 10 *11 12 14 15)
[ 0.185657] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.186312] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.186970] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 *10 11 12 14 15)
[ 0.187544] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 *10 11 12 14 15)
[ 0.188302] ACPI: Enabled 6 GPEs in block 00 to 3F
[ 0.188441] acpi root: \_SB_.PCI0 notify handler is installed
[ 0.188483] Found 1 acpi root devices
[ 0.188511] ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
[ 0.188674] ACPI: No dock devices found.
[ 0.188763] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.188826] vgaarb: loaded
[ 0.188878] vgaarb: bridge control possible 0000:00:02.0
[ 0.188985] SCSI subsystem initialized
[ 0.189040] ACPI: bus type scsi registered
[ 0.189106] libata version 3.00 loaded.
[ 0.189109] ACPI: bus type usb registered
[ 0.189178] usbcore: registered new interface driver usbfs
[ 0.189244] usbcore: registered new interface driver hub
[ 0.189321] usbcore: registered new device driver usb
[ 0.189390] Linux video capture interface: v2.00
[ 0.189473] Advanced Linux Sound Architecture Driver Initialized.
[ 0.189532] PCI: Using ACPI for IRQ routing
[ 0.191220] PCI: pci_cache_line_size set to 64 bytes
[ 0.191311] e820: reserve RAM buffer [mem 0x0009d800-0x0009ffff]
[ 0.191312] e820: reserve RAM buffer [mem 0xdab0f000-0xdbffffff]
[ 0.191314] e820: reserve RAM buffer [mem 0xdb000000-0xdbffffff]
[ 0.191315] e820: reserve RAM buffer [mem 0x21fe00000-0x21fffffff]
[ 0.191442] Switching to clocksource hpet
[ 0.191538] pnp: PnP ACPI init
[ 0.191594] ACPI: bus type pnp registered
[ 0.191669] pnp 00:00: [dma 4]
[ 0.191683] pnp 00:00: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.191699] pnp 00:01: Plug and Play ACPI device, IDs INT0800 (active)
[ 0.191767] pnp 00:02: Plug and Play ACPI device, IDs PNP0103 (active)
[ 0.191789] pnp 00:03: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.191819] system 00:04: [io 0x0680-0x069f] has been reserved
[ 0.191878] system 00:04: [io 0x1000-0x100f] has been reserved
[ 0.191937] system 00:04: [io 0xffff] has been reserved
[ 0.191996] system 00:04: [io 0xffff] has been reserved
[ 0.192054] system 00:04: [io 0x0400-0x0453] has been reserved
[ 0.192112] system 00:04: [io 0x0458-0x047f] has been reserved
[ 0.192171] system 00:04: [io 0x0500-0x057f] has been reserved
[ 0.192229] system 00:04: [io 0x164e-0x164f] has been reserved
[ 0.192289] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.192307] pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.192341] system 00:06: [io 0x0454-0x0457] has been reserved
[ 0.192401] system 00:06: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[ 0.192420] pnp 00:07: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.192438] pnp 00:08: Plug and Play ACPI device, IDs PNP0f13 (active)
[ 0.192544] system 00:09: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.192604] system 00:09: [mem 0xfed10000-0xfed17fff] has been reserved
[ 0.192664] system 00:09: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.192724] system 00:09: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.192784] system 00:09: [mem 0xf8000000-0xfbffffff] has been reserved
[ 0.192844] system 00:09: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.192907] system 00:09: [mem 0xfed90000-0xfed93fff] has been reserved
[ 0.192967] system 00:09: [mem 0xfed45000-0xfed8ffff] has been reserved
[ 0.193027] system 00:09: [mem 0xff000000-0xffffffff] could not be reserved
[ 0.193088] system 00:09: [mem 0xfee00000-0xfeefffff] could not be reserved
[ 0.193148] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.193312] system 00:0a: [mem 0x20000000-0x201fffff] could not be reserved
[ 0.193373] system 00:0a: [mem 0x40000000-0x401fffff] could not be reserved
[ 0.193441] system 00:0a: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.193476] pnp: PnP ACPI: found 11 devices
[ 0.193531] ACPI: ACPI bus type pnp unregistered
[ 0.229464] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 0.229528] pci 0000:00:1c.0: bridge window [mem 0xf1500000-0xf15fffff]
[ 0.229598] pci 0000:00:1c.3: PCI bridge to [bus 02-06]
[ 0.229657] pci 0000:00:1c.3: bridge window [io 0x3000-0x3fff]
[ 0.229721] pci 0000:00:1c.3: bridge window [mem 0xf0d00000-0xf14fffff]
[ 0.229785] pci 0000:00:1c.3: bridge window [mem 0xf0400000-0xf0bfffff 64bit pref]
[ 0.229852] pci 0000:00:1c.5: PCI bridge to [bus 07]
[ 0.229909] pci 0000:00:1c.5: bridge window [io 0x2000-0x2fff]
[ 0.229973] pci 0000:00:1c.5: bridge window [mem 0xf0c00000-0xf0cfffff 64bit pref]
[ 0.230160] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.230162] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.230163] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.230165] pci_bus 0000:00: resource 7 [mem 0xdfa00000-0xfeafffff]
[ 0.230166] pci_bus 0000:00: resource 8 [mem 0xfed40000-0xfed44fff]
[ 0.230168] pci_bus 0000:01: resource 1 [mem 0xf1500000-0xf15fffff]
[ 0.230169] pci_bus 0000:02: resource 0 [io 0x3000-0x3fff]
[ 0.230170] pci_bus 0000:02: resource 1 [mem 0xf0d00000-0xf14fffff]
[ 0.230172] pci_bus 0000:02: resource 2 [mem 0xf0400000-0xf0bfffff 64bit pref]
[ 0.230173] pci_bus 0000:07: resource 0 [io 0x2000-0x2fff]
[ 0.230174] pci_bus 0000:07: resource 2 [mem 0xf0c00000-0xf0cfffff 64bit pref]
[ 0.230197] NET: Registered protocol family 2
[ 0.230369] TCP established hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.230441] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.230510] TCP: Hash tables configured (established 8192 bind 8192)
[ 0.230580] TCP: reno registered
[ 0.230634] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 0.230695] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 0.230790] NET: Registered protocol family 1
[ 0.230854] pci 0000:00:02.0: Boot video device
[ 0.231072] PCI: CLS 64 bytes, default 64
[ 0.231650] bounce pool size: 64 pages
[ 0.232791] fuse init (API version 7.21)
[ 0.232906] msgmni has been set to 1631
[ 0.233235] io scheduler noop registered
[ 0.233328] io scheduler cfq registered (default)
[ 0.233627] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.233717] pciehp 0000:00:1c.3:pcie04: HPC vendor_id 8086 device_id 1c16 ss_vid 10cf ss_did 1610
[ 0.233823] pciehp 0000:00:1c.3:pcie04: service driver pciehp loaded
[ 0.233829] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.233898] intel_idle: MWAIT substates: 0x21120
[ 0.233898] intel_idle: v0.4 model 0x2A
[ 0.233899] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 0.234023] ACPI: AC Adapter [ACAD] (on-line)
[ 0.234195] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[ 0.234259] ACPI: Power Button [PWRB]
[ 0.234340] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input1
[ 0.234414] ACPI: Lid Switch [LID]
[ 0.234493] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[ 0.234555] ACPI: Power Button [PWRF]
[ 0.234661] ACPI: Requesting acpi_cpufreq
[ 0.236490] thermal LNXTHERM:00: registered as thermal_zone0
[ 0.236549] ACPI: Thermal Zone [THRM] (55 C)
[ 0.236616] isapnp: Scanning for PnP cards...
[ 0.237081] ACPI: Battery Slot [BAT1] (battery present)
[ 0.590974] isapnp: No Plug & Play device found
[ 0.595844] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 0.596230] Real Time Clock Driver v1.12b
[ 0.596286] Linux agpgart interface v0.103
[ 0.596363] [drm] Initialized drm 1.1.0 20060810
[ 0.596722] [drm] Memory usable by graphics device = 2048M
[ 0.596783] i915 0000:00:02.0: setting latency timer to 64
[ 0.596937] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 0.596996] [drm] Driver supports precise vblank timestamp query.
[ 0.597106] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 0.618321] [drm] Wrong MCH_SSKPD value: 0x16040307
[ 0.618380] [drm] This can cause pipe underruns and display issues.
[ 0.618439] [drm] Please upgrade your BIOS to fix this.
[ 0.634607] fbcon: inteldrmfb (fb0) is primary device
[ 1.228700] tsc: Refined TSC clocksource calibration: 2494.333 MHz
[ 1.228702] Switching to clocksource tsc
[ 1.774903] Console: switching to colour frame buffer device 170x48
[ 1.777714] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[ 1.777736] i915 0000:00:02.0: registered panic notifier
[ 1.797990] acpi device:31: registered as cooling_device4
[ 1.798123] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 1.798175] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input3
[ 1.798220] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 1.798312] ahci 0000:00:1f.2: version 3.0
[ 1.813379] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x9 impl SATA mode
[ 1.813412] ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ems apst
[ 1.813445] ahci 0000:00:1f.2: setting latency timer to 64
[ 1.821518] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off
[ 1.821603] scsi0 : ahci
[ 1.821655] scsi1 : ahci
[ 1.821699] scsi2 : ahci
[ 1.821742] scsi3 : ahci
[ 1.821784] scsi4 : ahci
[ 1.821827] scsi5 : ahci
[ 1.821858] ata1: SATA max UDMA/133 abar m2048@0xf1608000 port 0xf1608100 irq 19
[ 1.821885] ata2: DUMMY
[ 1.821893] ata3: DUMMY
[ 1.821902] ata4: SATA max UDMA/133 abar m2048@0xf1608000 port 0xf1608280 irq 19
[ 1.821928] ata5: DUMMY
[ 1.822364] ata6: DUMMY
[ 1.822830] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.823322] ehci-pci: EHCI PCI platform driver
[ 1.823862] ehci-pci 0000:00:1a.0: setting latency timer to 64
[ 1.823865] ehci-pci 0000:00:1a.0: EHCI Host Controller
[ 1.824365] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[ 1.824895] ehci-pci 0000:00:1a.0: debug port 2
[ 1.829343] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[ 1.829348] ehci-pci 0000:00:1a.0: irq 16, io mem 0xf160a000
[ 1.841396] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[ 1.841955] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.842524] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.843106] usb usb1: Product: EHCI Host Controller
[ 1.843696] usb usb1: Manufacturer: Linux 3.9.0-rc1+ ehci_hcd
[ 1.844302] usb usb1: SerialNumber: 0000:00:1a.0
[ 1.844991] hub 1-0:1.0: USB hub found
[ 1.845624] hub 1-0:1.0: 2 ports detected
[ 1.846344] ehci-pci 0000:00:1d.0: setting latency timer to 64
[ 1.846347] ehci-pci 0000:00:1d.0: EHCI Host Controller
[ 1.846996] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 1.847674] ehci-pci 0000:00:1d.0: debug port 2
[ 1.852258] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[ 1.852274] ehci-pci 0000:00:1d.0: irq 23, io mem 0xf1609000
[ 1.861417] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 1.862121] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.862837] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.863568] usb usb2: Product: EHCI Host Controller
[ 1.864308] usb usb2: Manufacturer: Linux 3.9.0-rc1+ ehci_hcd
[ 1.865052] usb usb2: SerialNumber: 0000:00:1d.0
[ 1.865845] hub 2-0:1.0: USB hub found
[ 1.866563] hub 2-0:1.0: 2 ports detected
[ 1.867308] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.868035] Initializing USB Mass Storage driver...
[ 1.868761] usbcore: registered new interface driver usb-storage
[ 1.869489] USB Mass Storage support registered.
[ 1.870209] usbcore: registered new interface driver ums-realtek
[ 1.870934] usbcore: registered new interface driver usbserial
[ 1.871647] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 1.878311] i8042: Detected active multiplexing controller, rev 1.1
[ 1.881830] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.882521] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[ 1.883200] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[ 1.883877] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[ 1.884555] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[ 1.885280] mousedev: PS/2 mouse device common for all mice
[ 1.886065] i2c /dev entries driver
[ 1.886944] ACPI Warning: 0x0000efa0-0x0000efbf SystemIO conflicts with Region \_SB_.PCI0.SBUS.SMBI 1 (20130117/utaddress-251)
[ 1.887685] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 1.888453] IR NEC protocol handler initialized
[ 1.889208] IR RC5(x) protocol handler initialized
[ 1.889955] IR RC6 protocol handler initialized
[ 1.890686] IR JVC protocol handler initialized
[ 1.891420] IR Sony protocol handler initialized
[ 1.892143] IR RC5 (streamzap) protocol handler initialized
[ 1.892866] IR SANYO protocol handler initialized
[ 1.893601] IR MCE Keyboard/mouse protocol handler initialized
[ 1.894406] cpuidle: using governor ladder
[ 1.895223] cpuidle: using governor menu
[ 1.896092] usbcore: registered new interface driver usbhid
[ 1.896827] usbhid: USB HID core driver
[ 1.897673] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 1.898406] TCP: cubic registered
[ 1.899119] NET: Registered protocol family 17
[ 1.899850] NET: Registered protocol family 15
[ 1.900674] Using IPI No-Shortcut mode
[ 1.911206] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
[ 2.141805] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 2.146477] ata4.00: ATAPI: TSSTcorp CDDVDW SN-208AB, FC01, max UDMA/100
[ 2.153811] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 2.156341] ata4.00: configured for UDMA/100
[ 2.157814] usb 1-1: new high-speed USB device number 2 using ehci-pci
[ 2.183143] ata1.00: ATA-8: TOSHIBA MK7575GSX, GT001A, max UDMA/100
[ 2.183943] ata1.00: 1465149168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 2.185730] ata1.00: configured for UDMA/100
[ 2.186639] scsi 0:0:0:0: Direct-Access ATA TOSHIBA MK7575GS GT00 PQ: 0 ANSI: 5
[ 2.187534] sd 0:0:0:0: [sda] 1465149168 512-byte logical blocks: (750 GB/698 GiB)
[ 2.188338] sd 0:0:0:0: [sda] 4096-byte physical blocks
[ 2.189271] sd 0:0:0:0: [sda] Write Protect is off
[ 2.189899] scsi 3:0:0:0: CD-ROM TSSTcorp CDDVDW SN-208AB FC01 PQ: 0 ANSI: 5
[ 2.190960] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.190979] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.192676] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 2.193544] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 2.194519] sr 3:0:0:0: Attached scsi CD-ROM sr0
[ 2.290393] usb 1-1: New USB device found, idVendor=8087, idProduct=0024
[ 2.291271] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 2.292451] hub 1-1:1.0: USB hub found
[ 2.293388] hub 1-1:1.0: 6 ports detected
[ 2.323324] sda: sda1 sda2 sda3 < sda5 sda6 sda7 sda8 sda9 sda10 >
[ 2.324903] sd 0:0:0:0: [sda] Attached SCSI disk
[ 2.337580] registered taskstats version 1
[ 2.338758] ALSA device list:
[ 2.339597] No soundcards found.
[ 2.374699] kjournald starting. Commit interval 5 seconds
[ 2.374742] EXT3-fs (sda5): mounted filesystem with writeback data mode
[ 2.374748] VFS: Mounted root (ext3 filesystem) readonly on device 8:5.
[ 2.395479] devtmpfs: mounted
[ 2.396349] Freeing unused kernel memory: 376k freed
[ 2.406091] usb 2-1: new high-speed USB device number 2 using ehci-pci
[ 2.538672] usb 2-1: New USB device found, idVendor=8087, idProduct=0024
[ 2.539530] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 2.540739] hub 2-1:1.0: USB hub found
[ 2.541679] hub 2-1:1.0: 6 ports detected
[ 2.614518] usb 1-1.3: new high-speed USB device number 3 using ehci-pci
[ 2.740474] usb 1-1.3: New USB device found, idVendor=04f2, idProduct=b213
[ 2.741363] usb 1-1.3: New USB device strings: Mfr=2, Product=1, SerialNumber=3
[ 2.742209] usb 1-1.3: Product: FJ Camera
[ 2.743061] usb 1-1.3: Manufacturer: Sonix Technology Co., Ltd.
[ 2.743902] usb 1-1.3: SerialNumber: SN0001
[ 2.818738] usb 2-1.3: new low-speed USB device number 3 using ehci-pci
[ 2.914543] usb 2-1.3: New USB device found, idVendor=0461, idProduct=4d20
[ 2.915461] usb 2-1.3: New USB device strings: Mfr=0, Product=2, SerialNumber=0
[ 2.916328] usb 2-1.3: Product: USB Optical Mouse
[ 2.919617] input: USB Optical Mouse as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.3/2-1.3:1.0/input/input5
[ 2.920710] hid-generic 0003:0461:4D20.0001: input: USB HID v1.11 Mouse [USB Optical Mouse] on usb-0000:00:1d.0-1.3/input0
[ 3.776409] EXT3-fs (sda5): using internal journal
[ 4.537417] udevd[95]: starting version 182
[ 4.967153] microcode: CPU0 sig=0x206a7, pf=0x10, revision=0x26
[ 4.996034] microcode: CPU1 sig=0x206a7, pf=0x10, revision=0x26
[ 4.997305] microcode: CPU2 sig=0x206a7, pf=0x10, revision=0x26
[ 4.998668] microcode: CPU3 sig=0x206a7, pf=0x10, revision=0x26
[ 4.999984] microcode: Microcode Update Driver: v2.00 <tigran@xxxxxxxxxxxxxxxxxxxx>, Peter Oruba
[ 5.084795] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 5.086430] r8169 0000:07:00.0 eth0: RTL8168e/8111e at 0xf8974000, 5c:9a:d8:5c:63:31, XID 0c200000 IRQ 17
[ 5.087775] r8169 0000:07:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[ 5.139085] hda_codec: ALC269VB: SKU not ready 0x90970130
[ 6.404279] uvcvideo: Found UVC 1.00 device FJ Camera (04f2:b213)
[ 6.417104] usbcore: registered new interface driver uvcvideo
[ 6.420253] USB Video Class driver (1.1.1)
[ 6.807006] r8169 0000:07:00.0 eth0: link down
[ 6.807024] r8169 0000:07:00.0 eth0: link down
[ 7.981607] kjournald starting. Commit interval 5 seconds
[ 7.981691] EXT3-fs (sda8): warning: maximal mount count reached, running e2fsck is recommended
[ 7.981901] EXT3-fs (sda8): using internal journal
[ 7.981904] EXT3-fs (sda8): mounted filesystem with writeback data mode
[ 8.011190] kjournald starting. Commit interval 5 seconds
[ 8.011278] EXT3-fs (sda9): warning: maximal mount count reached, running e2fsck is recommended
[ 8.011484] EXT3-fs (sda9): using internal journal
[ 8.011486] EXT3-fs (sda9): mounted filesystem with writeback data mode
[ 8.037953] kjournald starting. Commit interval 5 seconds
[ 8.038327] EXT3-fs (sda10): using internal journal
[ 8.038330] EXT3-fs (sda10): mounted filesystem with writeback data mode
[ 8.136132] Adding 8191996k swap on /dev/sda6. Priority:-1 extents:1 across:8191996k
[ 8.340605] r8169 0000:07:00.0 eth0: link up
[ 20.014352] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[ 173.939823] pciehp 0000:00:1c.3:pcie04: Card present on Slot(3)
[ 174.042170] pci 0000:02:00.0: [14f1:8852] type 00 class 0x040000
[ 174.042232] pci 0000:02:00.0: reg 10: [mem 0x00000000-0x001fffff 64bit]
[ 174.042430] pci 0000:02:00.0: supports D1 D2
[ 174.042434] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot
[ 174.042547] pci 0000:02:00.0: System wakeup disabled by ACPI
[ 174.042727] pci 0000:02:00.0: BAR 0: assigned [mem 0xf0e00000-0xf0ffffff 64bit]
[ 174.042758] pcieport 0000:00:1c.3: PCI bridge to [bus 02-06]
[ 174.042765] pcieport 0000:00:1c.3: bridge window [io 0x3000-0x3fff]
[ 174.042776] pcieport 0000:00:1c.3: bridge window [mem 0xf0d00000-0xf14fffff]
[ 174.042786] pcieport 0000:00:1c.3: bridge window [mem 0xf0400000-0xf0bfffff 64bit pref]
[ 174.042942] pci 0000:02:00.0: no hotplug settings from platform
[ 225.523708] pciehp 0000:00:1c.3:pcie04: Card not present on Slot(3)
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.9.0-rc1+ (chris@laptop) (gcc version 4.7.3 20130302 (prerelease) (GCC) ) #34 SMP PREEMPT Thu Mar 7 19:33:03 GMT 2013
[ 0.000000] Disabled fast string operations
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009d7ff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009d800-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000dab0efff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000dab0f000-0x00000000dad4efff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000dad4f000-0x00000000dad6efff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000dad6f000-0x00000000daf1efff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000daf1f000-0x00000000daf9efff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000daf9f000-0x00000000daffefff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000dafff000-0x00000000daffffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000db000000-0x00000000df9fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed10000-0x00000000fed19fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ffd80000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000021fdfffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.6 present.
[ 0.000000] DMI: FUJITSU LIFEBOOK AH531/FJNBB0F, BIOS 1.30 05/28/2012
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] e820: last_pfn = 0x21fe00 max_arch_pfn = 0x1000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0FFC00000 mask FFFC00000 write-protect
[ 0.000000] 1 base 000000000 mask F80000000 write-back
[ 0.000000] 2 base 080000000 mask FC0000000 write-back
[ 0.000000] 3 base 0C0000000 mask FE0000000 write-back
[ 0.000000] 4 base 0DC000000 mask FFC000000 uncachable
[ 0.000000] 5 base 0DB000000 mask FFF000000 uncachable
[ 0.000000] 6 base 100000000 mask F00000000 write-back
[ 0.000000] 7 base 200000000 mask FE0000000 write-back
[ 0.000000] 8 base 21FE00000 mask FFFE00000 uncachable
[ 0.000000] 9 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] initial memory mapped: [mem 0x00000000-0x01bfffff]
[ 0.000000] Base memory trampoline at [c0099000] 99000 size 16384
[ 0.000000] reserving inaccessible SNB gfx pages
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
[ 0.000000] init_memory_mapping: [mem 0x37a00000-0x37bfdfff]
[ 0.000000] [mem 0x37a00000-0x37bfdfff] page 4k
[ 0.000000] BRK [0x01628000, 0x01628fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x34000000-0x379fffff]
[ 0.000000] [mem 0x34000000-0x379fffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x00100000-0x33ffffff]
[ 0.000000] [mem 0x00100000-0x001fffff] page 4k
[ 0.000000] [mem 0x00200000-0x33ffffff] page 2M
[ 0.000000] ACPI: RSDP 000f00e0 00024 (v02 FUJ )
[ 0.000000] ACPI: XSDT daffe120 00084 (v01 FUJ PC 00000001 FUJ 00000001)
[ 0.000000] ACPI: FACP daff0000 000F4 (v03 FUJ PC 00000001 PTL 00000001)
[ 0.000000] ACPI: DSDT daff3000 0794A (v02 FUJ FJNBB0F 00000000 INTL 20061109)
[ 0.000000] ACPI: FACS daf3d000 00040
[ 0.000000] ACPI: SLIC daffd000 00176 (v01 FUJ PC 00000001 FUJ 00000001)
[ 0.000000] ACPI: SSDT daffb000 01068 (v01 FUJ PtidDevc 00001000 INTL 20061109)
[ 0.000000] ACPI: ASF! daff2000 000A5 (v32 FUJ PC 00000001 PTL 00000001)
[ 0.000000] ACPI: HPET dafef000 00038 (v01 FUJ PC 00000001 PTL 00000001)
[ 0.000000] ACPI: APIC dafee000 00098 (v01 FUJ PC 00000001 PTL 00000001)
[ 0.000000] ACPI: MCFG dafed000 0003C (v01 FUJ PC 00000001 PTL 00000001)
[ 0.000000] ACPI: SSDT dafec000 007C2 (v01 PmRef Cpu0Ist 00003000 INTL 20061109)
[ 0.000000] ACPI: SSDT dafeb000 00996 (v01 PmRef CpuPm 00003000 INTL 20061109)
[ 0.000000] ACPI: UEFI dafea000 0003E (v01 FUJ PC 00000001 PTL 00000001)
[ 0.000000] ACPI: UEFI dafe9000 00042 (v01 PTL COMBUF 00000001 PTL 00000001)
[ 0.000000] ACPI: UEFI dafe8000 00242 (v01 FUJ PC 00000001 PTL 00000001)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] 7810MB HIGHMEM available.
[ 0.000000] 891MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 37bfe000
[ 0.000000] low ram: 0 - 37bfe000
[ 0.000000] BRK [0x01629000, 0x01629fff] PGTABLE
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00001000-0x00ffffff]
[ 0.000000] Normal [mem 0x01000000-0x37bfdfff]
[ 0.000000] HighMem [mem 0x37bfe000-0x1fdfffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00001000-0x0009cfff]
[ 0.000000] node 0: [mem 0x00100000-0xdab0efff]
[ 0.000000] node 0: [mem 0xdafff000-0xdaffffff]
[ 0.000000] node 0: [mem 0x00000000-0x1fdfffff]
[ 0.000000] On node 0 totalpages: 2074796
[ 0.000000] free_area_init_node: node 0, pgdat c1569140, node_mem_map f37fe020
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3996 pages, LIFO batch:0
[ 0.000000] Normal zone: 1752 pages used for memmap
[ 0.000000] Normal zone: 224254 pages, LIFO batch:31
[ 0.000000] HighMem zone: 15621 pages used for memmap
[ 0.000000] HighMem zone: 1846546 pages, LIFO batch:31
[ 0.000000] Using APIC driver default
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x00] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x00] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x00] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x00] disabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x0e] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 14, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a301 base: 0xfed00000
[ 0.000000] smpboot: 8 Processors exceeds NR_CPUS limit of 4
[ 0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: 000000000009d000 - 000000000009e000
[ 0.000000] PM: Registered nosave memory: 000000000009e000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
[ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
[ 0.000000] e820: [mem 0xdfa00000-0xf7ffffff] available for PCI devices
[ 0.000000] setup_percpu: NR_CPUS:4 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 12 pages/cpu @f37bc000 s26496 r0 d22656 u49152
[ 0.000000] pcpu-alloc: s26496 r0 d22656 u49152 alloc=12*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2073012
[ 0.000000] Kernel command line: root=/dev/sda5 ro resume=/dev/sda6
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] __ex_table already sorted, skipping sort
[ 0.000000] Initializing CPU#0
[ 0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340
[ 0.000000] Initializing HighMem for node 0 (00037bfe:0021fe00)
[ 0.000000] Memory: 8221536k/8910848k available (4096k kernel code, 77644k reserved, 1466k data, 376k init, 7386180k highmem)
[ 0.000000] virtual kernel memory layout:
fixmap : 0xfff67000 - 0xfffff000 ( 608 kB)
pkmap : 0xffc00000 - 0xffe00000 (2048 kB)
vmalloc : 0xf83fe000 - 0xffbfe000 ( 120 MB)
lowmem : 0xc0000000 - 0xf7bfe000 ( 891 MB)
.init : 0xc156f000 - 0xc15cd000 ( 376 kB)
.data : 0xc1400258 - 0xc156eb80 (1466 kB)
.text : 0xc1000000 - 0xc1400258 (4096 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] Dump stacks of tasks blocking RCU-preempt GP.
[ 0.000000] NR_IRQS:2304 nr_irqs:712 16
[ 0.000000] CPU 0 irqstacks, hard=f3008000 soft=f300a000
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration failed
[ 0.012000] tsc: Unable to calibrate against PIT
[ 0.012000] tsc: using HPET reference calibration
[ 0.012000] tsc: Detected 2494.327 MHz processor
[ 0.000001] Calibrating delay loop (skipped), value calculated using timer frequency.. 4988.65 BogoMIPS (lpj=9977308)
[ 0.000116] pid_max: default: 32768 minimum: 301
[ 0.000197] Mount-cache hash table entries: 512
[ 0.000419] Disabled fast string operations
[ 0.000475] CPU: Physical Processor ID: 0
[ 0.000529] CPU: Processor Core ID: 0
[ 0.000585] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[ 0.000665] mce: CPU supports 7 MCE banks
[ 0.000730] CPU0: Thermal monitoring enabled (TM1)
[ 0.000793] Last level iTLB entries: 4KB 512, 2MB 0, 4MB 0
Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32
tlb_flushall_shift: 5
[ 0.000998] Freeing SMP alternatives: 16k freed
[ 0.001056] ACPI: Core revision 20130117
[ 0.005706] ACPI: All ACPI Tables successfully acquired
[ 0.006154] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.006629] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.046416] smpboot: CPU0: Intel(R) Core(TM) i5-2450M CPU @ 2.50GHz (fam: 06, model: 2a, stepping: 07)
[ 0.046612] TSC deadline timer enabled
[ 0.046620] Performance Events: PEBS fmt1+, 16-deep LBR, SandyBridge events, Intel PMU driver.
[ 0.046853] perf_event_intel: PEBS disabled due to CPU errata, please upgrade microcode
[ 0.046915] ... version: 3
[ 0.046970] ... bit width: 48
[ 0.047025] ... generic registers: 4
[ 0.047079] ... value mask: 0000ffffffffffff
[ 0.047136] ... max period: 000000007fffffff
[ 0.047192] ... fixed-purpose events: 3
[ 0.047247] ... event mask: 000000070000000f
[ 0.062836] CPU 1 irqstacks, hard=f30b2000 soft=f30b4000
[ 0.073190] Initializing CPU#1
[ 0.073965] Disabled fast string operations
[ 0.062837] smpboot: Booting Node 0, Processors #1
[ 0.076147] CPU 2 irqstacks, hard=f30d2000 soft=f30d4000
[ 0.086598] Initializing CPU#2
[ 0.087388] Disabled fast string operations
[ 0.076307] #2
[ 0.089565] CPU 3 irqstacks, hard=f30de000 soft=f30e8000
[ 0.089725] #3 OK
[ 0.100027] Initializing CPU#3
[ 0.100817] Disabled fast string operations
[ 0.102933] Brought up 4 CPUs
[ 0.103095] smpboot: Total of 4 processors activated (19954.61 BogoMIPS)
[ 0.105769] devtmpfs: initialized
[ 0.106013] PM: Registering ACPI NVS region [mem 0xdad4f000-0xdad6efff] (131072 bytes)
[ 0.106076] PM: Registering ACPI NVS region [mem 0xdaf1f000-0xdaf9efff] (524288 bytes)
[ 0.106204] NET: Registered protocol family 16
[ 0.106373] ACPI: bus type pci registered
[ 0.106467] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[ 0.106543] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
[ 0.106602] PCI: Using MMCONFIG for extended config space
[ 0.106659] PCI: Using configuration type 1 for base access
[ 0.107748] bio: create slab <bio-0> at 0
[ 0.107849] ACPI: Added _OSI(Module Device)
[ 0.107905] ACPI: Added _OSI(Processor Device)
[ 0.107961] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.108017] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.109289] ACPI: EC: Look up EC in DSDT
[ 0.110533] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.127015] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[ 0.127427] ACPI: SSDT dad4d718 0067C (v01 PmRef Cpu0Cst 00003001 INTL 20061109)
[ 0.127877] ACPI: Dynamic OEM Table Load:
[ 0.128011] ACPI: SSDT (null) 0067C (v01 PmRef Cpu0Cst 00003001 INTL 20061109)
[ 0.139220] ACPI: SSDT daf0fa98 00303 (v01 PmRef ApIst 00003000 INTL 20061109)
[ 0.139697] ACPI: Dynamic OEM Table Load:
[ 0.139831] ACPI: SSDT (null) 00303 (v01 PmRef ApIst 00003000 INTL 20061109)
[ 0.151121] ACPI: SSDT dad4cd98 00119 (v01 PmRef ApCst 00003000 INTL 20061109)
[ 0.151564] ACPI: Dynamic OEM Table Load:
[ 0.151697] ACPI: SSDT (null) 00119 (v01 PmRef ApCst 00003000 INTL 20061109)
[ 0.163655] ACPI: Interpreter enabled
[ 0.163714] ACPI: (supports S0ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20130117/hwxface-568)
[ 0.163913] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20130117/hwxface-568)
[ 0.164068] S3 S4 S5)
[ 0.164244] ACPI: Using IOAPIC for interrupt routing
[ 0.164322] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.168825] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
[ 0.168912] \_SB_.PCI0:_OSC invalid UUID
[ 0.168912] _OSC request data:1 8 1f
[ 0.168939] \_SB_.PCI0:_OSC invalid UUID
[ 0.168939] _OSC request data:1 f 1f
[ 0.168942] acpi PNP0A08:00: ACPI _OSC support notification failed, disabling PCIe ASPM
[ 0.169004] acpi PNP0A08:00: Unable to request _OSC control (_OSC support mask: 0x08)
[ 0.169522] PCI host bridge to bus 0000:00
[ 0.169578] pci_bus 0000:00: root bus resource [bus 00-3e]
[ 0.169635] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
[ 0.170238] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
[ 0.170297] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[ 0.170357] pci_bus 0000:00: root bus resource [mem 0xdfa00000-0xfeafffff]
[ 0.170417] pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed44fff]
[ 0.170483] pci 0000:00:00.0: [8086:0104] type 00 class 0x060000
[ 0.170555] pci 0000:00:02.0: [8086:0126] type 00 class 0x030000
[ 0.170564] pci 0000:00:02.0: reg 10: [mem 0xf0000000-0xf03fffff 64bit]
[ 0.170570] pci 0000:00:02.0: reg 18: [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.170574] pci 0000:00:02.0: reg 20: [io 0x4000-0x403f]
[ 0.170661] pci 0000:00:16.0: [8086:1c3a] type 00 class 0x078000
[ 0.170685] pci 0000:00:16.0: reg 10: [mem 0xf1605000-0xf160500f 64bit]
[ 0.170746] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[ 0.170820] pci 0000:00:1a.0: [8086:1c2d] type 00 class 0x0c0320
[ 0.170842] pci 0000:00:1a.0: reg 10: [mem 0xf160a000-0xf160a3ff]
[ 0.170914] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[ 0.170949] pci 0000:00:1a.0: System wakeup disabled by ACPI
[ 0.171038] pci 0000:00:1b.0: [8086:1c20] type 00 class 0x040300
[ 0.171058] pci 0000:00:1b.0: reg 10: [mem 0xf1600000-0xf1603fff 64bit]
[ 0.171112] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.171162] pci 0000:00:1c.0: [8086:1c10] type 01 class 0x060400
[ 0.171263] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.171327] pci 0000:00:1c.3: [8086:1c16] type 01 class 0x060400
[ 0.171426] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[ 0.171464] pci 0000:00:1c.3: System wakeup disabled by ACPI
[ 0.171549] pci 0000:00:1c.5: [8086:1c1a] type 01 class 0x060400
[ 0.171610] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
[ 0.171641] pci 0000:00:1c.5: System wakeup disabled by ACPI
[ 0.171730] pci 0000:00:1d.0: [8086:1c26] type 00 class 0x0c0320
[ 0.171752] pci 0000:00:1d.0: reg 10: [mem 0xf1609000-0xf16093ff]
[ 0.171825] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 0.171857] pci 0000:00:1d.0: System wakeup disabled by ACPI
[ 0.171943] pci 0000:00:1f.0: [8086:1c49] type 00 class 0x060100
[ 0.172077] pci 0000:00:1f.2: [8086:1c03] type 00 class 0x010601
[ 0.172095] pci 0000:00:1f.2: reg 10: [io 0x4088-0x408f]
[ 0.172103] pci 0000:00:1f.2: reg 14: [io 0x4094-0x4097]
[ 0.172111] pci 0000:00:1f.2: reg 18: [io 0x4080-0x4087]
[ 0.172119] pci 0000:00:1f.2: reg 1c: [io 0x4090-0x4093]
[ 0.172127] pci 0000:00:1f.2: reg 20: [io 0x4060-0x407f]
[ 0.172135] pci 0000:00:1f.2: reg 24: [mem 0xf1608000-0xf16087ff]
[ 0.172167] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.172219] pci 0000:00:1f.3: [8086:1c22] type 00 class 0x0c0500
[ 0.172234] pci 0000:00:1f.3: reg 10: [mem 0xf1604000-0xf16040ff 64bit]
[ 0.172255] pci 0000:00:1f.3: reg 20: [io 0xefa0-0xefbf]
[ 0.172549] pci 0000:01:00.0: [8086:008a] type 00 class 0x028000
[ 0.172697] pci 0000:01:00.0: reg 10: [mem 0xf1500000-0xf1501fff 64bit]
[ 0.173253] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold
[ 0.173378] pci 0000:01:00.0: System wakeup disabled by ACPI
[ 0.179208] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 0.179272] pci 0000:00:1c.0: bridge window [mem 0xf1500000-0xf15fffff]
[ 0.179360] pci 0000:00:1c.3: PCI bridge to [bus 02-06]
[ 0.179421] pci 0000:00:1c.3: bridge window [io 0x3000-0x3fff]
[ 0.179426] pci 0000:00:1c.3: bridge window [mem 0xf0d00000-0xf14fffff]
[ 0.179435] pci 0000:00:1c.3: bridge window [mem 0xf0400000-0xf0bfffff 64bit pref]
[ 0.179509] pci 0000:07:00.0: [10ec:8168] type 00 class 0x020000
[ 0.179530] pci 0000:07:00.0: reg 10: [io 0x2000-0x20ff]
[ 0.179564] pci 0000:07:00.0: reg 18: [mem 0xf0c04000-0xf0c04fff 64bit pref]
[ 0.179586] pci 0000:07:00.0: reg 20: [mem 0xf0c00000-0xf0c03fff 64bit pref]
[ 0.179646] pci 0000:07:00.0: supports D1 D2
[ 0.179647] pci 0000:07:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.179687] pci 0000:07:00.0: System wakeup disabled by ACPI
[ 0.187116] pci 0000:00:1c.5: PCI bridge to [bus 07]
[ 0.187202] pci 0000:00:1c.5: bridge window [io 0x2000-0x2fff]
[ 0.187210] pci 0000:00:1c.5: bridge window [mem 0xf0c00000-0xf0cfffff 64bit pref]
[ 0.187231] pci_bus 0000:00: on NUMA node 0
[ 0.187231] ACPI _OSC control for PCIe not granted, disabling ASPM
[ 0.187606] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 10 *11 12 14 15)
[ 0.188182] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 10 *11 12 14 15)
[ 0.188756] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 *10 11 12 14 15)
[ 0.189330] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 10 *11 12 14 15)
[ 0.189905] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.190560] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.191215] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 *10 11 12 14 15)
[ 0.191789] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 *10 11 12 14 15)
[ 0.192545] ACPI: Enabled 6 GPEs in block 00 to 3F
[ 0.192684] acpi root: \_SB_.PCI0 notify handler is installed
[ 0.192726] Found 1 acpi root devices
[ 0.192754] ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
[ 0.192917] ACPI: No dock devices found.
[ 0.193006] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.193069] vgaarb: loaded
[ 0.193121] vgaarb: bridge control possible 0000:00:02.0
[ 0.193227] SCSI subsystem initialized
[ 0.193283] ACPI: bus type scsi registered
[ 0.193349] libata version 3.00 loaded.
[ 0.193352] ACPI: bus type usb registered
[ 0.193420] usbcore: registered new interface driver usbfs
[ 0.193487] usbcore: registered new interface driver hub
[ 0.193563] usbcore: registered new device driver usb
[ 0.193632] Linux video capture interface: v2.00
[ 0.193716] Advanced Linux Sound Architecture Driver Initialized.
[ 0.193774] PCI: Using ACPI for IRQ routing
[ 0.195462] PCI: pci_cache_line_size set to 64 bytes
[ 0.195553] e820: reserve RAM buffer [mem 0x0009d800-0x0009ffff]
[ 0.195554] e820: reserve RAM buffer [mem 0xdab0f000-0xdbffffff]
[ 0.195555] e820: reserve RAM buffer [mem 0xdb000000-0xdbffffff]
[ 0.195556] e820: reserve RAM buffer [mem 0x21fe00000-0x21fffffff]
[ 0.195675] Switching to clocksource hpet
[ 0.195771] pnp: PnP ACPI init
[ 0.195827] ACPI: bus type pnp registered
[ 0.195902] pnp 00:00: [dma 4]
[ 0.195915] pnp 00:00: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.195931] pnp 00:01: Plug and Play ACPI device, IDs INT0800 (active)
[ 0.195998] pnp 00:02: Plug and Play ACPI device, IDs PNP0103 (active)
[ 0.196020] pnp 00:03: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.196051] system 00:04: [io 0x0680-0x069f] has been reserved
[ 0.196110] system 00:04: [io 0x1000-0x100f] has been reserved
[ 0.196169] system 00:04: [io 0xffff] has been reserved
[ 0.196228] system 00:04: [io 0xffff] has been reserved
[ 0.196285] system 00:04: [io 0x0400-0x0453] has been reserved
[ 0.196344] system 00:04: [io 0x0458-0x047f] has been reserved
[ 0.196403] system 00:04: [io 0x0500-0x057f] has been reserved
[ 0.196462] system 00:04: [io 0x164e-0x164f] has been reserved
[ 0.196521] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.196539] pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.196573] system 00:06: [io 0x0454-0x0457] has been reserved
[ 0.196632] system 00:06: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[ 0.196651] pnp 00:07: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.196670] pnp 00:08: Plug and Play ACPI device, IDs PNP0f13 (active)
[ 0.196775] system 00:09: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.196835] system 00:09: [mem 0xfed10000-0xfed17fff] has been reserved
[ 0.196895] system 00:09: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.196955] system 00:09: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.197014] system 00:09: [mem 0xf8000000-0xfbffffff] has been reserved
[ 0.197074] system 00:09: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.197137] system 00:09: [mem 0xfed90000-0xfed93fff] has been reserved
[ 0.197197] system 00:09: [mem 0xfed45000-0xfed8ffff] has been reserved
[ 0.197256] system 00:09: [mem 0xff000000-0xffffffff] could not be reserved
[ 0.197316] system 00:09: [mem 0xfee00000-0xfeefffff] could not be reserved
[ 0.197376] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.197540] system 00:0a: [mem 0x20000000-0x201fffff] could not be reserved
[ 0.197600] system 00:0a: [mem 0x40000000-0x401fffff] could not be reserved
[ 0.197661] system 00:0a: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.197692] pnp: PnP ACPI: found 11 devices
[ 0.197747] ACPI: ACPI bus type pnp unregistered
[ 0.233658] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 0.233721] pci 0000:00:1c.0: bridge window [mem 0xf1500000-0xf15fffff]
[ 0.233791] pci 0000:00:1c.3: PCI bridge to [bus 02-06]
[ 0.233850] pci 0000:00:1c.3: bridge window [io 0x3000-0x3fff]
[ 0.233914] pci 0000:00:1c.3: bridge window [mem 0xf0d00000-0xf14fffff]
[ 0.233977] pci 0000:00:1c.3: bridge window [mem 0xf0400000-0xf0bfffff 64bit pref]
[ 0.234045] pci 0000:00:1c.5: PCI bridge to [bus 07]
[ 0.234102] pci 0000:00:1c.5: bridge window [io 0x2000-0x2fff]
[ 0.234166] pci 0000:00:1c.5: bridge window [mem 0xf0c00000-0xf0cfffff 64bit pref]
[ 0.234353] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.234355] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.234356] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.234358] pci_bus 0000:00: resource 7 [mem 0xdfa00000-0xfeafffff]
[ 0.234359] pci_bus 0000:00: resource 8 [mem 0xfed40000-0xfed44fff]
[ 0.234360] pci_bus 0000:01: resource 1 [mem 0xf1500000-0xf15fffff]
[ 0.234362] pci_bus 0000:02: resource 0 [io 0x3000-0x3fff]
[ 0.234363] pci_bus 0000:02: resource 1 [mem 0xf0d00000-0xf14fffff]
[ 0.234364] pci_bus 0000:02: resource 2 [mem 0xf0400000-0xf0bfffff 64bit pref]
[ 0.234366] pci_bus 0000:07: resource 0 [io 0x2000-0x2fff]
[ 0.234367] pci_bus 0000:07: resource 2 [mem 0xf0c00000-0xf0cfffff 64bit pref]
[ 0.234390] NET: Registered protocol family 2
[ 0.234562] TCP established hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.234634] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.234703] TCP: Hash tables configured (established 8192 bind 8192)
[ 0.234773] TCP: reno registered
[ 0.234826] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 0.234887] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 0.234981] NET: Registered protocol family 1
[ 0.235043] pci 0000:00:02.0: Boot video device
[ 0.235262] PCI: CLS 64 bytes, default 64
[ 0.235834] bounce pool size: 64 pages
[ 0.236972] fuse init (API version 7.21)
[ 0.237088] msgmni has been set to 1631
[ 0.237415] io scheduler noop registered
[ 0.237507] io scheduler cfq registered (default)
[ 0.237768] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.237840] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.237909] intel_idle: MWAIT substates: 0x21120
[ 0.237909] intel_idle: v0.4 model 0x2A
[ 0.237910] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 0.238027] ACPI: AC Adapter [ACAD] (on-line)
[ 0.238195] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[ 0.238258] ACPI: Power Button [PWRB]
[ 0.238340] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input1
[ 0.238414] ACPI: Lid Switch [LID]
[ 0.238490] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[ 0.238553] ACPI: Power Button [PWRF]
[ 0.238659] ACPI: Requesting acpi_cpufreq
[ 0.240502] thermal LNXTHERM:00: registered as thermal_zone0
[ 0.240561] ACPI: Thermal Zone [THRM] (55 C)
[ 0.240628] isapnp: Scanning for PnP cards...
[ 0.241093] ACPI: Battery Slot [BAT1] (battery present)
[ 0.595042] isapnp: No Plug & Play device found
[ 0.599949] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 0.600336] Real Time Clock Driver v1.12b
[ 0.600392] Linux agpgart interface v0.103
[ 0.600469] [drm] Initialized drm 1.1.0 20060810
[ 0.600830] [drm] Memory usable by graphics device = 2048M
[ 0.600891] i915 0000:00:02.0: setting latency timer to 64
[ 0.601044] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 0.601103] [drm] Driver supports precise vblank timestamp query.
[ 0.601215] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 0.622424] [drm] Wrong MCH_SSKPD value: 0x16040307
[ 0.622483] [drm] This can cause pipe underruns and display issues.
[ 0.622541] [drm] Please upgrade your BIOS to fix this.
[ 0.638836] fbcon: inteldrmfb (fb0) is primary device
[ 1.232933] tsc: Refined TSC clocksource calibration: 2494.333 MHz
[ 1.232935] Switching to clocksource tsc
[ 1.813739] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off
[ 1.819197] Console: switching to colour frame buffer device 170x48
[ 1.822032] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[ 1.822054] i915 0000:00:02.0: registered panic notifier
[ 1.842276] acpi device:31: registered as cooling_device4
[ 1.842409] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 1.842462] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input3
[ 1.842508] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 1.842600] ahci 0000:00:1f.2: version 3.0
[ 1.857654] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x9 impl SATA mode
[ 1.857686] ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ems apst
[ 1.857719] ahci 0000:00:1f.2: setting latency timer to 64
[ 1.865878] scsi0 : ahci
[ 1.865930] scsi1 : ahci
[ 1.865970] scsi2 : ahci
[ 1.866010] scsi3 : ahci
[ 1.866049] scsi4 : ahci
[ 1.866089] scsi5 : ahci
[ 1.866120] ata1: SATA max UDMA/133 abar m2048@0xf1608000 port 0xf1608100 irq 19
[ 1.866147] ata2: DUMMY
[ 1.866154] ata3: DUMMY
[ 1.866164] ata4: SATA max UDMA/133 abar m2048@0xf1608000 port 0xf1608280 irq 19
[ 1.866190] ata5: DUMMY
[ 1.866627] ata6: DUMMY
[ 1.867091] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.867581] ehci-pci: EHCI PCI platform driver
[ 1.868116] ehci-pci 0000:00:1a.0: setting latency timer to 64
[ 1.868119] ehci-pci 0000:00:1a.0: EHCI Host Controller
[ 1.868616] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[ 1.869146] ehci-pci 0000:00:1a.0: debug port 2
[ 1.873586] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[ 1.873591] ehci-pci 0000:00:1a.0: irq 16, io mem 0xf160a000
[ 1.885675] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[ 1.886234] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.886802] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.887383] usb usb1: Product: EHCI Host Controller
[ 1.887972] usb usb1: Manufacturer: Linux 3.9.0-rc1+ ehci_hcd
[ 1.888577] usb usb1: SerialNumber: 0000:00:1a.0
[ 1.889260] hub 1-0:1.0: USB hub found
[ 1.889888] hub 1-0:1.0: 2 ports detected
[ 1.890603] ehci-pci 0000:00:1d.0: setting latency timer to 64
[ 1.890606] ehci-pci 0000:00:1d.0: EHCI Host Controller
[ 1.891254] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 1.891931] ehci-pci 0000:00:1d.0: debug port 2
[ 1.896501] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[ 1.896516] ehci-pci 0000:00:1d.0: irq 23, io mem 0xf1609000
[ 1.905697] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 1.906402] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.907118] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.907849] usb usb2: Product: EHCI Host Controller
[ 1.908589] usb usb2: Manufacturer: Linux 3.9.0-rc1+ ehci_hcd
[ 1.909333] usb usb2: SerialNumber: 0000:00:1d.0
[ 1.910126] hub 2-0:1.0: USB hub found
[ 1.910844] hub 2-0:1.0: 2 ports detected
[ 1.911587] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.912312] Initializing USB Mass Storage driver...
[ 1.913032] usbcore: registered new interface driver usb-storage
[ 1.913752] USB Mass Storage support registered.
[ 1.914474] usbcore: registered new interface driver ums-realtek
[ 1.915209] usbcore: registered new interface driver usbserial
[ 1.915932] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 1.922342] i8042: Detected active multiplexing controller, rev 1.1
[ 1.925863] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.926562] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[ 1.927242] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[ 1.927920] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[ 1.928597] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[ 1.929318] mousedev: PS/2 mouse device common for all mice
[ 1.930087] i2c /dev entries driver
[ 1.930956] ACPI Warning: 0x0000efa0-0x0000efbf SystemIO conflicts with Region \_SB_.PCI0.SBUS.SMBI 1 (20130117/utaddress-251)
[ 1.931697] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 1.932470] IR NEC protocol handler initialized
[ 1.933222] IR RC5(x) protocol handler initialized
[ 1.933972] IR RC6 protocol handler initialized
[ 1.934709] IR JVC protocol handler initialized
[ 1.935439] IR Sony protocol handler initialized
[ 1.936163] IR RC5 (streamzap) protocol handler initialized
[ 1.936895] IR SANYO protocol handler initialized
[ 1.937619] IR MCE Keyboard/mouse protocol handler initialized
[ 1.938430] cpuidle: using governor ladder
[ 1.939250] cpuidle: using governor menu
[ 1.940143] usbcore: registered new interface driver usbhid
[ 1.940878] usbhid: USB HID core driver
[ 1.941710] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 1.942447] TCP: cubic registered
[ 1.943179] NET: Registered protocol family 17
[ 1.943903] NET: Registered protocol family 15
[ 1.944711] Using IPI No-Shortcut mode
[ 1.953868] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
[ 2.186080] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 2.192122] ata4.00: ATAPI: TSSTcorp CDDVDW SN-208AB, FC01, max UDMA/100
[ 2.194084] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 2.201976] ata4.00: configured for UDMA/100
[ 2.202054] usb 1-1: new high-speed USB device number 2 using ehci-pci
[ 2.243147] ata1.00: ATA-8: TOSHIBA MK7575GSX, GT001A, max UDMA/100
[ 2.243948] ata1.00: 1465149168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 2.245728] ata1.00: configured for UDMA/100
[ 2.246715] scsi 0:0:0:0: Direct-Access ATA TOSHIBA MK7575GS GT00 PQ: 0 ANSI: 5
[ 2.247608] sd 0:0:0:0: [sda] 1465149168 512-byte logical blocks: (750 GB/698 GiB)
[ 2.248409] sd 0:0:0:0: [sda] 4096-byte physical blocks
[ 2.249332] sd 0:0:0:0: [sda] Write Protect is off
[ 2.249993] scsi 3:0:0:0: CD-ROM TSSTcorp CDDVDW SN-208AB FC01 PQ: 0 ANSI: 5
[ 2.251016] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.251075] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.252772] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 2.253643] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 2.254651] sr 3:0:0:0: Attached scsi CD-ROM sr0
[ 2.334640] usb 1-1: New USB device found, idVendor=8087, idProduct=0024
[ 2.335513] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 2.336694] hub 1-1:1.0: USB hub found
[ 2.337633] hub 1-1:1.0: 6 ports detected
[ 2.383380] sda: sda1 sda2 sda3 < sda5 sda6 sda7 sda8 sda9 sda10 >
[ 2.384914] sd 0:0:0:0: [sda] Attached SCSI disk
[ 2.397591] registered taskstats version 1
[ 2.398781] ALSA device list:
[ 2.399618] No soundcards found.
[ 2.434707] kjournald starting. Commit interval 5 seconds
[ 2.434748] EXT3-fs (sda5): mounted filesystem with writeback data mode
[ 2.434753] VFS: Mounted root (ext3 filesystem) readonly on device 8:5.
[ 2.450343] usb 2-1: new high-speed USB device number 2 using ehci-pci
[ 2.455498] devtmpfs: mounted
[ 2.456352] Freeing unused kernel memory: 376k freed
[ 2.582916] usb 2-1: New USB device found, idVendor=8087, idProduct=0024
[ 2.583776] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 2.584994] hub 2-1:1.0: USB hub found
[ 2.585995] hub 2-1:1.0: 6 ports detected
[ 2.658747] usb 1-1.3: new high-speed USB device number 3 using ehci-pci
[ 2.784796] usb 1-1.3: New USB device found, idVendor=04f2, idProduct=b213
[ 2.785674] usb 1-1.3: New USB device strings: Mfr=2, Product=1, SerialNumber=3
[ 2.786522] usb 1-1.3: Product: FJ Camera
[ 2.787377] usb 1-1.3: Manufacturer: Sonix Technology Co., Ltd.
[ 2.788221] usb 1-1.3: SerialNumber: SN0001
[ 2.863019] usb 2-1.3: new low-speed USB device number 3 using ehci-pci
[ 2.958788] usb 2-1.3: New USB device found, idVendor=0461, idProduct=4d20
[ 2.959708] usb 2-1.3: New USB device strings: Mfr=0, Product=2, SerialNumber=0
[ 2.960590] usb 2-1.3: Product: USB Optical Mouse
[ 2.963929] input: USB Optical Mouse as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.3/2-1.3:1.0/input/input5
[ 2.964925] hid-generic 0003:0461:4D20.0001: input: USB HID v1.11 Mouse [USB Optical Mouse] on usb-0000:00:1d.0-1.3/input0
[ 3.791616] EXT3-fs (sda5): using internal journal
[ 4.564100] udevd[95]: starting version 182
[ 4.971568] microcode: CPU0 sig=0x206a7, pf=0x10, revision=0x26
[ 5.000453] microcode: CPU1 sig=0x206a7, pf=0x10, revision=0x26
[ 5.001741] microcode: CPU2 sig=0x206a7, pf=0x10, revision=0x26
[ 5.003104] microcode: CPU3 sig=0x206a7, pf=0x10, revision=0x26
[ 5.004435] microcode: Microcode Update Driver: v2.00 <tigran@xxxxxxxxxxxxxxxxxxxx>, Peter Oruba
[ 5.111472] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 5.112908] r8169 0000:07:00.0 eth0: RTL8168e/8111e at 0xf89dc000, 5c:9a:d8:5c:63:31, XID 0c200000 IRQ 17
[ 5.114134] r8169 0000:07:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[ 5.165709] hda_codec: ALC269VB: SKU not ready 0x90970130
[ 6.218516] r8169 0000:07:00.0 eth0: link down
[ 6.219836] r8169 0000:07:00.0 eth0: link down
[ 6.820272] uvcvideo: Found UVC 1.00 device FJ Camera (04f2:b213)
[ 6.833017] usbcore: registered new interface driver uvcvideo
[ 6.836051] USB Video Class driver (1.1.1)
[ 7.754281] r8169 0000:07:00.0 eth0: link up
[ 8.008218] kjournald starting. Commit interval 5 seconds
[ 8.008281] EXT3-fs (sda8): warning: maximal mount count reached, running e2fsck is recommended
[ 8.013531] EXT3-fs (sda8): using internal journal
[ 8.016138] EXT3-fs (sda8): mounted filesystem with writeback data mode
[ 8.060072] kjournald starting. Commit interval 5 seconds
[ 8.060142] EXT3-fs (sda9): warning: maximal mount count reached, running e2fsck is recommended
[ 8.065466] EXT3-fs (sda9): using internal journal
[ 8.068132] EXT3-fs (sda9): mounted filesystem with writeback data mode
[ 8.120214] kjournald starting. Commit interval 5 seconds
[ 8.123089] EXT3-fs (sda10): using internal journal
[ 8.125830] EXT3-fs (sda10): mounted filesystem with writeback data mode
[ 8.218360] Adding 8191996k swap on /dev/sda6. Priority:-1 extents:1 across:8191996k
[ 20.641906] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
