On Tue, Nov 20, 2012 at 11:58 AM, Betty Dall <betty.dall@xxxxxx> wrote:
> Add a new define for the 8.0 GT/s supported link speed added in the PCI
> 3.0 specification. This is used to identify a device's current link speed
> (PCI_EXP_CLS).
>
> Here is the section of the PCI 3.0 specification:
> "Supported Link Speeds Vector – This field indicates the
> supported Link speed(s) of the associated Port. For each bit, a
> value of 1b indicates that the corresponding Link speed is
> supported; otherwise, the Link speed is not supported.
> Bit definitions within this field are:
> Bit 0 2.5 GT/s
> Bit 1 5.0 GT/s
> Bit 2 8.0 GT/s
> Bits 6:3 RsvdP
> Multi-Function devices associated with an Upstream Port must
> report the same value in this field for all Functions."
>
> Signed-off-by: Betty Dall <betty.dall@xxxxxx>
> ---
> include/uapi/linux/pci_regs.h | 1 +
> 1 files changed, 1 insertions(+), 0 deletions(-)
>
> diff --git a/include/uapi/linux/pci_regs.h b/include/uapi/linux/pci_regs.h
> index 20ae747..0cf8abb 100644
> --- a/include/uapi/linux/pci_regs.h
> +++ b/include/uapi/linux/pci_regs.h
> @@ -469,6 +469,7 @@
> #define PCI_EXP_LNKSTA_CLS 0x000f /* Current Link Speed */
> #define PCI_EXP_LNKSTA_CLS_2_5GB 0x01 /* Current Link Speed 2.5GT/s */
> #define PCI_EXP_LNKSTA_CLS_5_0GB 0x02 /* Current Link Speed 5.0GT/s */
> +#define PCI_EXP_LNKSTA_CLS_8_0GB 0x04 /* Current Link Speed 8.0GT/s */
This isn't right, is it? The Link Status Current Link Speed field is
a four-bit field that's encoded. The currently defined values are 1-7
(not 1, 2, 4, 8). So I think you would want to add this instead:
#define PCI_EXP_LNKSTA_CLS_8_0GB 0x03 /* Current Link Speed 8.0GT/s */
That corresponds to bit 2 in the Supported Link Speeds Vector in the
Link Capabilities 2 register:
#define PCI_EXP_LNKCAP2_SLS_8_0GB 0x04 /* Supported Link Speed 8.0GT/s */
This whole mess looks like potential off-by-one errors everywhere, and
I could be mistaken about this :)
While you're here, can you fix the typo ("Nogotiated") in the line below?
> #define PCI_EXP_LNKSTA_NLW 0x03f0 /* Nogotiated Link Width */
> #define PCI_EXP_LNKSTA_NLW_SHIFT 4 /* start of NLW mask in link status */
> #define PCI_EXP_LNKSTA_LT 0x0800 /* Link Training */
> --
> 1.7.7.6
>
--
To unsubscribe from this list: send the line "unsubscribe linux-pci" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
