Add a new define for the 8.0 GT/s supported link speed added in the PCI 3.0 specification. This is used to identify a device's current link speed (PCI_EXP_CLS). Here is the section of the PCI 3.0 specification: "Supported Link Speeds Vector – This field indicates the supported Link speed(s) of the associated Port. For each bit, a value of 1b indicates that the corresponding Link speed is supported; otherwise, the Link speed is not supported. Bit definitions within this field are: Bit 0 2.5 GT/s Bit 1 5.0 GT/s Bit 2 8.0 GT/s Bits 6:3 RsvdP Multi-Function devices associated with an Upstream Port must report the same value in this field for all Functions." Signed-off-by: Betty Dall <betty.dall@xxxxxx> --- include/uapi/linux/pci_regs.h | 1 + 1 files changed, 1 insertions(+), 0 deletions(-) diff --git a/include/uapi/linux/pci_regs.h b/include/uapi/linux/pci_regs.h index 20ae747..0cf8abb 100644 --- a/include/uapi/linux/pci_regs.h +++ b/include/uapi/linux/pci_regs.h @@ -469,6 +469,7 @@ #define PCI_EXP_LNKSTA_CLS 0x000f /* Current Link Speed */ #define PCI_EXP_LNKSTA_CLS_2_5GB 0x01 /* Current Link Speed 2.5GT/s */ #define PCI_EXP_LNKSTA_CLS_5_0GB 0x02 /* Current Link Speed 5.0GT/s */ +#define PCI_EXP_LNKSTA_CLS_8_0GB 0x04 /* Current Link Speed 8.0GT/s */ #define PCI_EXP_LNKSTA_NLW 0x03f0 /* Nogotiated Link Width */ #define PCI_EXP_LNKSTA_NLW_SHIFT 4 /* start of NLW mask in link status */ #define PCI_EXP_LNKSTA_LT 0x0800 /* Link Training */ -- 1.7.7.6 -- To unsubscribe from this list: send the line "unsubscribe linux-pci" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
