Re: [PATCH v3 7/8] ACPI, PCI: add hostbridge removal function

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Tue, Sep 18, 2012 at 12:25 AM, Taku Izumi <izumi.taku@xxxxxxxxxxxxxx> wrote:
>
> Currently there's no PCI-related clean-up code
> in acpi_pci_root_remove() function.
> This patch introduces function for hostbridge removal,
> and brings back pci_stop_bus_devices() function.
>
> Signed-off-by: Taku Izumi <izumi.taku@xxxxxxxxxxxxxx>
> ---
>  drivers/acpi/pci_bind.c     |    7 +++++++
>  drivers/acpi/pci_root.c     |    7 +++++++
>  drivers/pci/remove.c        |   27 +++++++++++++++++++++++++++
>  include/acpi/acpi_drivers.h |    1 +
>  include/linux/pci.h         |    2 ++
>  5 files changed, 44 insertions(+)
>
> Index: Bjorn-next-0903/drivers/pci/remove.c
> ===================================================================
> --- Bjorn-next-0903.orig/drivers/pci/remove.c
> +++ Bjorn-next-0903/drivers/pci/remove.c
> @@ -92,3 +92,30 @@ void pci_stop_and_remove_bus_device(stru
>         pci_destroy_dev(dev);
>  }
>  EXPORT_SYMBOL(pci_stop_and_remove_bus_device);
> +
> +void pci_stop_bus_devices(struct pci_bus *bus)
> +{
> +       struct pci_dev *dev, *tmp;
> +
> +       list_for_each_entry_safe_reverse(dev, tmp, &bus->devices, bus_list) {
> +               if (dev->subordinate)
> +                       pci_stop_bus_devices(dev->subordinate);
> +               pci_stop_dev(dev);
> +       }
> +
> +}
> +EXPORT_SYMBOL(pci_stop_bus_devices);
> +
> +void pci_remove_host_bridge(struct pci_host_bridge *bridge)
> +{
> +       struct pci_bus *root = bridge->bus;
> +       struct pci_dev *dev, *tmp;
> +
> +       list_for_each_entry_safe_reverse(dev, tmp, &root->devices, bus_list)
> +               pci_stop_and_remove_bus_device(dev);
> +
> +       pci_remove_bus(root);
> +
> +       device_unregister(&bridge->dev);
> +}
> +EXPORT_SYMBOL(pci_remove_host_bridge);
> Index: Bjorn-next-0903/drivers/acpi/pci_root.c
> ===================================================================
> --- Bjorn-next-0903.orig/drivers/acpi/pci_root.c
> +++ Bjorn-next-0903/drivers/acpi/pci_root.c
> @@ -652,8 +652,10 @@ static int acpi_pci_root_remove(struct a
>  {
>         struct acpi_pci_root *root = acpi_driver_data(device);
>         struct acpi_pci_driver *driver;
> +       struct pci_host_bridge *bridge = to_pci_host_bridge(root->bus->bridge);
>
>         mutex_lock(&acpi_pci_root_lock);
> +       pci_stop_bus_devices(root->bus);
>         list_for_each_entry(driver, &acpi_pci_drivers, node)
>                 if (driver->remove)
>                         driver->remove(root);
> @@ -661,6 +663,11 @@ static int acpi_pci_root_remove(struct a
>         device_set_run_wake(root->bus->bridge, false);
>         pci_acpi_remove_bus_pm_notifier(device);
>
> +       acpi_pci_irq_del_prt(root->bus);

acpi_pci_irq_del_prt() does not actually have a dependency on the
struct pci_bus, so I think its interface should be changed so it takes
a segment number and a bus number instead of the "struct pci_bus *".
The same applies to acpi_pci_irq_add_prt().

This basically boils down to reverting 859a3f86ca8 and d9efae3688a.  I
acked those changes at the time, but I think they were a mistake.  The
reason is that passing in the struct pci_bus * ties them into the host
bridge add/remove flow in a way that's not necessary.

If we get rid of the struct pci_bus * dependency, then we can easily
add the _PRT before doing PCI enumeration behind the bridge, and we
can remove the _PRT after removing the PCI devices.  I think this is
one small step toward getting rid of the add/start and stop/remove
split.

> +       acpi_pci_unbind_root(device);
> +
> +       pci_remove_host_bridge(bridge);
> +
>         list_del(&root->node);
>         mutex_unlock(&acpi_pci_root_lock);
>         kfree(root);
> Index: Bjorn-next-0903/include/linux/pci.h
> ===================================================================
> --- Bjorn-next-0903.orig/include/linux/pci.h
> +++ Bjorn-next-0903/include/linux/pci.h
> @@ -734,6 +734,8 @@ extern struct pci_dev *pci_dev_get(struc
>  extern void pci_dev_put(struct pci_dev *dev);
>  extern void pci_remove_bus(struct pci_bus *b);
>  extern void pci_stop_and_remove_bus_device(struct pci_dev *dev);
> +extern void pci_stop_bus_devices(struct pci_bus *bus);
> +extern void pci_remove_host_bridge(struct pci_host_bridge *bridge);
>  void pci_setup_cardbus(struct pci_bus *bus);
>  extern void pci_sort_breadthfirst(void);
>  #define dev_is_pci(d) ((d)->bus == &pci_bus_type)
> Index: Bjorn-next-0903/drivers/acpi/pci_bind.c
> ===================================================================
> --- Bjorn-next-0903.orig/drivers/acpi/pci_bind.c
> +++ Bjorn-next-0903/drivers/acpi/pci_bind.c
> @@ -118,3 +118,10 @@ int acpi_pci_bind_root(struct acpi_devic
>
>         return 0;
>  }
> +
> +void  acpi_pci_unbind_root(struct acpi_device *device)
> +{
> +       device->ops.bind = NULL;
> +       device->ops.unbind = NULL;
> +}
> +
> Index: Bjorn-next-0903/include/acpi/acpi_drivers.h
> ===================================================================
> --- Bjorn-next-0903.orig/include/acpi/acpi_drivers.h
> +++ Bjorn-next-0903/include/acpi/acpi_drivers.h
> @@ -101,6 +101,7 @@ struct pci_bus;
>
>  struct pci_dev *acpi_get_pci_dev(acpi_handle);
>  int acpi_pci_bind_root(struct acpi_device *device);
> +void acpi_pci_unbind_root(struct acpi_device *device);
>
>  /* Arch-defined function to add a bus to the system */
>
>
--
To unsubscribe from this list: send the line "unsubscribe linux-pci" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html


[Index of Archives]     [DMA Engine]     [Linux Coverity]     [Linux USB]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Greybus]

  Powered by Linux