On Wed, Mar 05, 2025 at 05:41:29PM +0400, George Moussalem wrote:
> From: Sricharan Ramabadhran <quic_srichara@xxxxxxxxxxx>
>
> Add IPQ5018 platform with is based on Qcom IP rev. 2.9.0
> and Synopsys IP rev. 5.00a.
>
> The platform itself has two PCIe Gen2 controllers: one single-lane and
> one dual-lane. So let's add the IPQ5018 compatible and re-use 2_9_0 ops.
>
> Signed-off-by: Nitheesh Sekar <quic_nsekar@xxxxxxxxxxx>
> Signed-off-by: Sricharan R <quic_srichara@xxxxxxxxxxx>
> Signed-off-by: George Moussalem <george.moussalem@xxxxxxxxxxx>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
- Mani
> ---
> drivers/pci/controller/dwc/pcie-qcom.c | 1 +
> 1 file changed, 1 insertion(+)
>
> diff --git a/drivers/pci/controller/dwc/pcie-qcom.c b/drivers/pci/controller/dwc/pcie-qcom.c
> index e4d3366ead1f..94800c217d1d 100644
> --- a/drivers/pci/controller/dwc/pcie-qcom.c
> +++ b/drivers/pci/controller/dwc/pcie-qcom.c
> @@ -1840,6 +1840,7 @@ static const struct of_device_id qcom_pcie_match[] = {
> { .compatible = "qcom,pcie-apq8064", .data = &cfg_2_1_0 },
> { .compatible = "qcom,pcie-apq8084", .data = &cfg_1_0_0 },
> { .compatible = "qcom,pcie-ipq4019", .data = &cfg_2_4_0 },
> + { .compatible = "qcom,pcie-ipq5018", .data = &cfg_2_9_0 },
> { .compatible = "qcom,pcie-ipq6018", .data = &cfg_2_9_0 },
> { .compatible = "qcom,pcie-ipq8064", .data = &cfg_2_1_0 },
> { .compatible = "qcom,pcie-ipq8064-v2", .data = &cfg_2_1_0 },
> --
> 2.48.1
>
--
மணிவண்ணன் சதாசிவம்
