Hello, > Commit under Fixes assigned the value of 'linkdown_irq_regfield' for the > J784S4 SoC as 'LINK_DOWN' which corresponds to BIT(1). However, according > to the Technical Reference Manual and Register Documentation for the J784S4 > SoC [0], BIT(1) corresponds to "ENABLE_SYS_EN_PCIE_DPA_1" which is __NOT__ > the field for the link-state interrupt. Instead, it is BIT(10) of the > "PCIE_INTD_ENABLE_REG_SYS_2" register that corresponds to the link-state > field named as "ENABLE_SYS_EN_PCIE_LINK_STATE". > > Hence, set 'linkdown_irq_regfield' to the macro 'J7200_LINK_DOWN' which > expands to BIT(10) and was first defined for the J7200 SoC. Other SoCs > already reuse this macro since it accurately represents the link-state > field in their respective "PCIE_INTD_ENABLE_REG_SYS_2" register. > > [0]: https://www.ti.com/lit/zip/spruj52 Applied to controller/j721e, thank you! Krzysztof
