On 1/14/2025 5:38 PM, Ira Weiny wrote:
> Bowman, Terry wrote:
>>
>>
>> On 1/14/2025 4:02 PM, Ira Weiny wrote:
>>> Terry Bowman wrote:
>>>> Add logic to map CXL PCIe Upstream Switch Port (USP) RAS registers.
>>>>
>>>> Introduce 'struct cxl_regs' member into 'struct cxl_port' to cache a
>>>> pointer to the CXL Upstream Port's mapped RAS registers.
>>>>
>>>> Also, introduce cxl_uport_init_ras_reporting() to perform the USP RAS
>>>> register mapping. This is similar to the existing
>>>> cxl_dport_init_ras_reporting() but for USP devices.
>>>>
>>>> The USP may have multiple downstream endpoints. Before mapping AER
>>>> registers check if the registers are already mapped.
>>>>
>>>> Signed-off-by: Terry Bowman <terry.bowman@xxxxxxx>
>>>> ---
>>>> drivers/cxl/core/pci.c | 15 +++++++++++++++
>>>> drivers/cxl/cxl.h | 4 ++++
>>>> drivers/cxl/mem.c | 8 ++++++++
>>>> 3 files changed, 27 insertions(+)
>>>>
>>>> diff --git a/drivers/cxl/core/pci.c b/drivers/cxl/core/pci.c
>>>> index 1af2d0a14f5d..97e6a15bea88 100644
>>>> --- a/drivers/cxl/core/pci.c
>>>> +++ b/drivers/cxl/core/pci.c
>>>> @@ -773,6 +773,21 @@ static void cxl_disable_rch_root_ints(struct cxl_dport *dport)
>>>> writel(aer_cmd, aer_base + PCI_ERR_ROOT_COMMAND);
>>>> }
>>>>
>>>> +void cxl_uport_init_ras_reporting(struct cxl_port *port)
>>>> +{
>>>> + /* uport may have more than 1 downstream EP. Check if already mapped. */
>>>> + if (port->uport_regs.ras)
>>>> + return;
>>>> +
>>>> + port->reg_map.host = &port->dev;
>>>> + if (cxl_map_component_regs(&port->reg_map, &port->uport_regs,
>>>> + BIT(CXL_CM_CAP_CAP_ID_RAS))) {
>>>> + dev_err(&port->dev, "Failed to map RAS capability.\n");
>>>> + return;
>>> Why return here? Actually I think 8/16 had the same issue now that I see
>>> this.
>>>
>>> Other than that:
>>>
>>> Reviewed-by: Ira Weiny <ira.weiny@xxxxxxxxx>
>>>
>>> [snip]
>> If RAS registers fail mapping then exit to avoid CXL Port error handler initialization.
>> The CXL Port error handlers rely on RAS registers for logging and without mapped RAS
>> registers the error handlers will return immediately.
> Sorry I was not clear and I should not have clipped the text so much. You
> return in a block which is at the end of the function:
>
>
> +void cxl_uport_init_ras_reporting(struct cxl_port *port)
> +{
> + /* uport may have more than 1 downstream EP. Check if already mapped. */
> + if (port->uport_regs.ras)
> + return;
> +
> + port->reg_map.host = &port->dev;
> + if (cxl_map_component_regs(&port->reg_map, &port->uport_regs,
> + BIT(CXL_CM_CAP_CAP_ID_RAS))) {
> + dev_err(&port->dev, "Failed to map RAS capability.\n");
> + return;
> + }
> +}
>
> So no need for this specific statement?
>
> Ira
I wrote it this way to add the handler initialization (after the return) in later patch
without a diff removal. But, your correct, I can remove the 'return' statement in this patch
and add in later patch without cluttering the diff.
Thanks. I'll make the change.
Regards,
Terry
