Re: [PATCH 08/11] PCI/IDE: Add IDE establishment helpers

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 





On 6/12/24 09:24, Dan Williams wrote:
There are two components to establishing an encrypted link, provisioning
the stream in config-space, and programming the keys into the link layer
via the IDE_KM (key management) protocol. These helpers enable the
former, and are in support of TSM coordinated IDE_KM. When / if native
IDE establishment arrives it will share this same config-space
provisioning flow, but for now IDE_KM, in any form, is saved for a
follow-on change.

With the TSM implementations of SEV-TIO and TDX Connect in mind this
abstracts small differences in those implementations. For example, TDX
Connect handles Root Port registers updates while SEV-TIO expects System
Software to update the Root Port registers. This is the rationale for
the PCI_IDE_SETUP_ROOT_PORT flag.

The other design detail for TSM-coordinated IDE establishment is that
the TSM manages allocation of stream-ids, this is why the stream_id is
passed in to pci_ide_stream_setup().

The flow is:

pci_ide_stream_probe()
   Gather stream settings (devid and address filters)
pci_ide_stream_setup()
   Program the stream settings into the endpoint, and optionally Root Port)
pci_ide_enable_stream()
   Run the stream after IDE_KM

In support of system administrators auditing where platform IDE stream
resources are being spent, the allocated stream is reflected as a
symlink from the host-bridge to the endpoint.

Thanks to Wu Hao for a draft implementation of this infrastructure.

Cc: Bjorn Helgaas <bhelgaas@xxxxxxxxxx>
Cc: Lukas Wunner <lukas@xxxxxxxxx>
Cc: Samuel Ortiz <sameo@xxxxxxxxxxxx>
Co-developed-by: Alexey Kardashevskiy <aik@xxxxxxx>
Signed-off-by: Alexey Kardashevskiy <aik@xxxxxxx>
Co-developed-by: Xu Yilun <yilun.xu@xxxxxxxxxxxxxxx>
Signed-off-by: Xu Yilun <yilun.xu@xxxxxxxxxxxxxxx>
Signed-off-by: Dan Williams <dan.j.williams@xxxxxxxxx>
---
  .../ABI/testing/sysfs-devices-pci-host-bridge      |   28 +++
  drivers/pci/ide.c                                  |  192 ++++++++++++++++++++
  drivers/pci/pci.h                                  |    4
  drivers/pci/probe.c                                |    1
  include/linux/pci-ide.h                            |   33 +++
  include/linux/pci.h                                |    4
  6 files changed, 262 insertions(+)
  create mode 100644 Documentation/ABI/testing/sysfs-devices-pci-host-bridge
  create mode 100644 include/linux/pci-ide.h

diff --git a/Documentation/ABI/testing/sysfs-devices-pci-host-bridge b/Documentation/ABI/testing/sysfs-devices-pci-host-bridge
new file mode 100644
index 000000000000..15dafb46b176
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-devices-pci-host-bridge
@@ -0,0 +1,28 @@
+What:		/sys/devices/pciDDDDD:BB
+		/sys/devices/.../pciDDDDD:BB
+Date:		December, 2024
+Contact:	linux-pci@xxxxxxxxxxxxxxx
+Description:
+		A PCI host bridge device parents a PCI bus device topology. PCI
+		controllers may also parent host bridges. The DDDDD:BB format
+		convey the PCI domain number and the bus number for root ports
+		of the host bridge.
+
+What:		pciDDDDD:BB/firmware_node
+Date:		December, 2024
+Contact:	linux-pci@xxxxxxxxxxxxxxx
+Description:
+		(RO) Symlink to the platform firmware device object "companion"
+		of the host bridge. For example, an ACPI device with an _HID of
+		PNP0A08 (/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00).
+
+What:		pciDDDDD:BB/streamN:DDDDD:BB:DD:F
+Date:		December, 2024
+Contact:	linux-pci@xxxxxxxxxxxxxxx
+Description:
+		(RO) When a host-bridge has established a secure connection,
+		typically PCIe IDE, between a host-bridge an endpoint, this
+		symlink appears. The primary function is to account how many
+		streams can be returned to the available secure streams pool by
+		invoking the tsm/disconnect flow. The link points to the
+		endpoint PCI device at domain:DDDDD bus:BB device:DD function:F.
diff --git a/drivers/pci/ide.c b/drivers/pci/ide.c
index a0c09d9e0b75..c37f35f0d2c0 100644
--- a/drivers/pci/ide.c
+++ b/drivers/pci/ide.c
@@ -5,6 +5,9 @@
#define dev_fmt(fmt) "PCI/IDE: " fmt
  #include <linux/pci.h>
+#include <linux/sysfs.h>
+#include <linux/pci-ide.h>
+#include <linux/bitfield.h>
  #include "pci.h"
static int sel_ide_offset(u16 cap, int stream_id, int nr_ide_mem)
@@ -71,3 +74,192 @@ void pci_ide_init(struct pci_dev *pdev)
  	pdev->sel_ide_cap = sel_ide_cap;
  	pdev->nr_ide_mem = nr_ide_mem;
  }
+
+void pci_init_host_bridge_ide(struct pci_host_bridge *hb)
+{
+	hb->ide_stream_res =
+		DEFINE_RES_MEM_NAMED(0, 0, "IDE Address Association");
+}
+
+/*
+ * Retrieve stream association parameters for devid (RID) and resources
+ * (device address ranges)
+ */
+void pci_ide_stream_probe(struct pci_dev *pdev, struct pci_ide *ide)
+{
+	int num_vf = pci_num_vf(pdev);
+
+	*ide = (struct pci_ide) { .stream_id = -1 };
+
+	if (pdev->fm_enabled)
+		ide->domain = pci_domain_nr(pdev->bus);
+	ide->devid_start = pci_dev_id(pdev);
+
+	/* for SR-IOV case, cover all VFs */
+	if (num_vf)
+		ide->devid_end = PCI_DEVID(pci_iov_virtfn_bus(pdev, num_vf),
+					   pci_iov_virtfn_devfn(pdev, num_vf));
+	else
+		ide->devid_end = ide->devid_start;
+
+	/* TODO: address association probing... */
+}
+EXPORT_SYMBOL_GPL(pci_ide_stream_probe);
+
+static void __pci_ide_stream_teardown(struct pci_dev *pdev, struct pci_ide *ide)
+{
+	int pos;
+
+	pos = sel_ide_offset(pdev->sel_ide_cap, ide->stream_id,
+			     pdev->nr_ide_mem);
+
+	pci_write_config_dword(pdev, pos + PCI_IDE_SEL_CTL, 0);
+	for (int i = ide->nr_mem - 1; i >= 0; i--) {
+		pci_write_config_dword(pdev, pos + PCI_IDE_SEL_ADDR_3(i), 0);
+		pci_write_config_dword(pdev, pos + PCI_IDE_SEL_ADDR_2(i), 0);
+		pci_write_config_dword(pdev, pos + PCI_IDE_SEL_ADDR_1(i), 0);
+	}
+	pci_write_config_dword(pdev, pos + PCI_IDE_SEL_RID_2, 0);
+	pci_write_config_dword(pdev, pos + PCI_IDE_SEL_RID_1, 0);
+}
+
+static void __pci_ide_stream_setup(struct pci_dev *pdev, struct pci_ide *ide)
+{
+	int pos;
+	u32 val;
+
+	pos = sel_ide_offset(pdev->sel_ide_cap, ide->stream_id,
+			     pdev->nr_ide_mem);
+
+	val = FIELD_PREP(PCI_IDE_SEL_RID_1_LIMIT_MASK, ide->devid_end);
+	pci_write_config_dword(pdev, pos + PCI_IDE_SEL_RID_1, val);
+
+	val = FIELD_PREP(PCI_IDE_SEL_RID_2_VALID, 1) |
+	      FIELD_PREP(PCI_IDE_SEL_RID_2_BASE_MASK, ide->devid_start) |
+	      FIELD_PREP(PCI_IDE_SEL_RID_2_SEG_MASK, ide->domain);
+	pci_write_config_dword(pdev, pos + PCI_IDE_SEL_RID_2, val);
+
+	for (int i = 0; i < ide->nr_mem; i++) {


This needs to test that (pdev->nr_ide_mem >= ide->nr_mem), easy to miss especially when PCI_IDE_SETUP_ROOT_PORT. Thanks,



+		val = FIELD_PREP(PCI_IDE_SEL_ADDR_1_VALID, 1) |
+		      FIELD_PREP(PCI_IDE_SEL_ADDR_1_BASE_LOW_MASK,
+				 lower_32_bits(ide->mem[i].start) >>
+					 PCI_IDE_SEL_ADDR_1_BASE_LOW_SHIFT) |
+		      FIELD_PREP(PCI_IDE_SEL_ADDR_1_LIMIT_LOW_MASK,
+				 lower_32_bits(ide->mem[i].end) >>
+					 PCI_IDE_SEL_ADDR_1_LIMIT_LOW_SHIFT);
+		pci_write_config_dword(pdev, pos + PCI_IDE_SEL_ADDR_1(i), val);
+
+		val = upper_32_bits(ide->mem[i].end);
+		pci_write_config_dword(pdev, pos + PCI_IDE_SEL_ADDR_2(i), val);
+
+		val = upper_32_bits(ide->mem[i].start);
+		pci_write_config_dword(pdev, pos + PCI_IDE_SEL_ADDR_3(i), val);
+	}
+}
+
+/*
+ * Establish IDE stream parameters in @pdev and, optionally, its root port
+ */
+int pci_ide_stream_setup(struct pci_dev *pdev, struct pci_ide *ide,
+			 enum pci_ide_flags flags)
+{
+	struct pci_host_bridge *hb = pci_find_host_bridge(pdev->bus);
+	struct pci_dev *rp = pcie_find_root_port(pdev);
+	int mem = 0, rc;
+
+	if (ide->stream_id < 0 || ide->stream_id > U8_MAX) {
+		pci_err(pdev, "Setup fail: Invalid stream id: %d\n", ide->stream_id);
+		return -ENXIO;
+	}
+
+	if (test_and_set_bit_lock(ide->stream_id, hb->ide_stream_ids)) {
+		pci_err(pdev, "Setup fail: Busy stream id: %d\n",
+			ide->stream_id);
+		return -EBUSY;
+	}
+
+	ide->name = kasprintf(GFP_KERNEL, "stream%d:%s", ide->stream_id,
+			      dev_name(&pdev->dev));
+	if (!ide->name) {
+		rc = -ENOMEM;
+		goto err_name;
+	}
+
+	rc = sysfs_create_link(&hb->dev.kobj, &pdev->dev.kobj, ide->name);
+	if (rc)
+		goto err_link;
+
+	for (mem = 0; mem < ide->nr_mem; mem++)
+		if (!__request_region(&hb->ide_stream_res, ide->mem[mem].start,
+				      range_len(&ide->mem[mem]), ide->name,
+				      0)) {
+			pci_err(pdev,
+				"Setup fail: stream%d: address association conflict [%#llx-%#llx]\n",
+				ide->stream_id, ide->mem[mem].start,
+				ide->mem[mem].end);
+
+			rc = -EBUSY;
+			goto err;
+		}
+
+	__pci_ide_stream_setup(pdev, ide);
+	if (flags & PCI_IDE_SETUP_ROOT_PORT)
+		__pci_ide_stream_setup(rp, ide);
+
+	return 0;
+err:
+	for (; mem >= 0; mem--)
+		__release_region(&hb->ide_stream_res, ide->mem[mem].start,
+				 range_len(&ide->mem[mem]));
+	sysfs_remove_link(&hb->dev.kobj, ide->name);
+err_link:
+	kfree(ide->name);
+err_name:
+	clear_bit_unlock(ide->stream_id, hb->ide_stream_ids);
+	return rc;
+}
+EXPORT_SYMBOL_GPL(pci_ide_stream_setup);
+
+void pci_ide_enable_stream(struct pci_dev *pdev, struct pci_ide *ide)
+{
+	int pos;
+	u32 val;
+
+	pos = sel_ide_offset(pdev->sel_ide_cap, ide->stream_id,
+			     pdev->nr_ide_mem);
+
+	val = FIELD_PREP(PCI_IDE_SEL_CTL_ID_MASK, ide->stream_id) |
+	      FIELD_PREP(PCI_IDE_SEL_CTL_DEFAULT, 1);
+	pci_write_config_dword(pdev, pos + PCI_IDE_SEL_CTL, val);
+}
+EXPORT_SYMBOL_GPL(pci_ide_enable_stream);
+
+void pci_ide_disable_stream(struct pci_dev *pdev, struct pci_ide *ide)
+{
+	int pos;
+
+	pos = sel_ide_offset(pdev->sel_ide_cap, ide->stream_id,
+			     pdev->nr_ide_mem);
+
+	pci_write_config_dword(pdev, pos + PCI_IDE_SEL_CTL, 0);
+}
+EXPORT_SYMBOL_GPL(pci_ide_disable_stream);
+
+void pci_ide_stream_teardown(struct pci_dev *pdev, struct pci_ide *ide,
+			     enum pci_ide_flags flags)
+{
+	struct pci_host_bridge *hb = pci_find_host_bridge(pdev->bus);
+	struct pci_dev *rp = pcie_find_root_port(pdev);
+
+	__pci_ide_stream_teardown(pdev, ide);
+	if (flags & PCI_IDE_SETUP_ROOT_PORT)
+		__pci_ide_stream_teardown(rp, ide);
+
+	for (int i = ide->nr_mem - 1; i >= 0; i--)
+		__release_region(&hb->ide_stream_res, ide->mem[i].start,
+				 range_len(&ide->mem[i]));
+	sysfs_remove_link(&hb->dev.kobj, ide->name);
+	kfree(ide->name);
+	clear_bit_unlock(ide->stream_id, hb->ide_stream_ids);
+}
+EXPORT_SYMBOL_GPL(pci_ide_stream_teardown);
diff --git a/drivers/pci/pci.h b/drivers/pci/pci.h
index 6565eb72ded2..b267fabfd542 100644
--- a/drivers/pci/pci.h
+++ b/drivers/pci/pci.h
@@ -465,8 +465,12 @@ static inline void pci_npem_remove(struct pci_dev *dev) { }
#ifdef CONFIG_PCI_IDE
  void pci_ide_init(struct pci_dev *dev);
+void pci_init_host_bridge_ide(struct pci_host_bridge *bridge);
  #else
  static inline void pci_ide_init(struct pci_dev *dev) { }
+static inline void pci_init_host_bridge_ide(struct pci_host_bridge *bridge)
+{
+}
  #endif
#ifdef CONFIG_PCI_TSM
diff --git a/drivers/pci/probe.c b/drivers/pci/probe.c
index 6c1fe6354d26..667faa18ced2 100644
--- a/drivers/pci/probe.c
+++ b/drivers/pci/probe.c
@@ -608,6 +608,7 @@ static void pci_init_host_bridge(struct pci_host_bridge *bridge)
  	bridge->native_dpc = 1;
  	bridge->domain_nr = PCI_DOMAIN_NR_NOT_SET;
  	bridge->native_cxl_error = 1;
+	pci_init_host_bridge_ide(bridge);
device_initialize(&bridge->dev);
  }
diff --git a/include/linux/pci-ide.h b/include/linux/pci-ide.h
new file mode 100644
index 000000000000..24e08a413645
--- /dev/null
+++ b/include/linux/pci-ide.h
@@ -0,0 +1,33 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/* Copyright(c) 2024 Intel Corporation. All rights reserved. */
+
+/* PCIe 6.2 section 6.33 Integrity & Data Encryption (IDE) */
+
+#ifndef __PCI_IDE_H__
+#define __PCI_IDE_H__
+
+#include <linux/range.h>
+
+struct pci_ide {
+	int domain;
+	u16 devid_start;
+	u16 devid_end;
+	int stream_id;
+	const char *name;
+	int nr_mem;
+	struct range mem[16];
+};
+
+void pci_ide_stream_probe(struct pci_dev *pdev, struct pci_ide *ide);
+
+enum pci_ide_flags {
+	PCI_IDE_SETUP_ROOT_PORT = BIT(0),
+};
+
+int pci_ide_stream_setup(struct pci_dev *pdev, struct pci_ide *ide,
+			 enum pci_ide_flags flags);
+void pci_ide_stream_teardown(struct pci_dev *pdev, struct pci_ide *ide,
+			     enum pci_ide_flags flags);
+void pci_ide_enable_stream(struct pci_dev *pdev, struct pci_ide *ide);
+void pci_ide_disable_stream(struct pci_dev *pdev, struct pci_ide *ide);
+#endif /* __PCI_IDE_H__ */
diff --git a/include/linux/pci.h b/include/linux/pci.h
index 10d035395a43..5d9fc498bc70 100644
--- a/include/linux/pci.h
+++ b/include/linux/pci.h
@@ -601,6 +601,10 @@ struct pci_host_bridge {
  	int		domain_nr;
  	struct list_head windows;	/* resource_entry */
  	struct list_head dma_ranges;	/* dma ranges resource list */
+#ifdef CONFIG_PCI_IDE			/* track IDE stream id allocation */
+	DECLARE_BITMAP(ide_stream_ids, PCI_IDE_SEL_CTL_ID_MAX + 1);
+	struct resource ide_stream_res; /* track ide stream address association */
+#endif
  	u8 (*swizzle_irq)(struct pci_dev *, u8 *); /* Platform IRQ swizzler */
  	int (*map_irq)(const struct pci_dev *, u8, u8);
  	void (*release_fn)(struct pci_host_bridge *);


--
Alexey





[Index of Archives]     [DMA Engine]     [Linux Coverity]     [Linux USB]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Greybus]

  Powered by Linux