On Sun, 15 Dec 2024 11:20:53 +0100
Lukas Wunner <lukas@xxxxxxxxx> wrote:
> If a PCIe port only supports a single speed, enabling bandwidth control
> is pointless: There's no need to monitor autonomous speed changes, nor
> can the speed be changed.
>
> Not enabling it saves a small amount of memory and compute resources,
> but also fixes a boot hang reported by Niklas: It occurs when enabling
> bandwidth control on Downstream Ports of Intel JHL7540 "Titan Ridge 2018"
> Thunderbolt controllers. The ports only support 2.5 GT/s in accordance
> with USB4 v2 sec 11.2.1, so the present commit works around the issue.
>
> PCIe r6.2 sec 8.2.1 prescribes that:
>
> "A device must support 2.5 GT/s and is not permitted to skip support
> for any data rates between 2.5 GT/s and the highest supported rate."
>
> Consequently, bandwidth control is currently only disabled if a port
> doesn't support higher speeds than 2.5 GT/s. However the Implementation
> Note in PCIe r6.2 sec 7.5.3.18 cautions:
>
> "It is strongly encouraged that software primarily utilize the
> Supported Link Speeds Vector instead of the Max Link Speed field,
> so that software can determine the exact set of supported speeds on
> current and future hardware. This can avoid software being confused
> if a future specification defines Links that do not require support
> for all slower speeds."
>
> In other words, future revisions of the PCIe Base Spec may allow gaps
> in the Supported Link Speeds Vector. To be future-proof, don't just
> check whether speeds above 2.5 GT/s are supported, but rather check
> whether *more than one* speed is supported.
It has long felt like the need for the very low speeds will become optional
eventually, though the challenges of getting a backwards compatibility
change into the specification may make that take a while. Hence
I agree this approach makes sense.
Reviewed-by: Jonathan Cameron <Jonthan.Cameron@xxxxxxxxxx>
>
> Fixes: 665745f27487 ("PCI/bwctrl: Re-add BW notification portdrv as PCIe BW controller")
> Reported-by: Niklas Schnelle <niks@xxxxxxxxxx>
> Closes: https://lore.kernel.org/r/db8e457fcd155436449b035e8791a8241b0df400.camel@xxxxxxxxxx/
> Signed-off-by: Lukas Wunner <lukas@xxxxxxxxx>
> Cc: Ilpo Järvinen <ilpo.jarvinen@xxxxxxxxxxxxxxx>
> ---
> drivers/pci/pcie/portdrv.c | 4 +++-
> 1 file changed, 3 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/pci/pcie/portdrv.c b/drivers/pci/pcie/portdrv.c
> index 5e10306b6308..02e73099bad0 100644
> --- a/drivers/pci/pcie/portdrv.c
> +++ b/drivers/pci/pcie/portdrv.c
> @@ -265,12 +265,14 @@ static int get_port_device_capability(struct pci_dev *dev)
> (pcie_ports_dpc_native || (services & PCIE_PORT_SERVICE_AER)))
> services |= PCIE_PORT_SERVICE_DPC;
>
> + /* Enable bandwidth control if more than one speed is supported. */
> if (pci_pcie_type(dev) == PCI_EXP_TYPE_DOWNSTREAM ||
> pci_pcie_type(dev) == PCI_EXP_TYPE_ROOT_PORT) {
> u32 linkcap;
>
> pcie_capability_read_dword(dev, PCI_EXP_LNKCAP, &linkcap);
> - if (linkcap & PCI_EXP_LNKCAP_LBNC)
> + if (linkcap & PCI_EXP_LNKCAP_LBNC &&
> + hweight8(dev->supported_speeds) > 1)
> services |= PCIE_PORT_SERVICE_BWCTRL;
> }
>
