On 11/15/2024 3:35 AM, Lukas Wunner wrote:
> On Wed, Nov 13, 2024 at 03:54:20PM -0600, Terry Bowman wrote:
>> The AER service driver's aer_get_device_error_info() function doesn't read
>> uncorrectable (UCE) fatal error status from PCIe upstream port devices,
>> including CXL upstream switch ports. As a result, fatal errors are not
>> logged or handled as needed for CXL PCIe upstream switch port devices.
>>
>> Update the aer_get_device_error_info() function to read the UCE fatal
>> status for all CXL PCIe port devices. Make the change to not affect
>> non-CXL PCIe devices.
>>
>> The fatal error status will be used in future patches implementing
>> CXL PCIe port uncorrectable error handling and logging.
> [...]
>> --- a/drivers/pci/pcie/aer.c
>> +++ b/drivers/pci/pcie/aer.c
>> @@ -1250,7 +1250,8 @@ int aer_get_device_error_info(struct pci_dev *dev, struct aer_err_info *info)
>> } else if (type == PCI_EXP_TYPE_ROOT_PORT ||
>> type == PCI_EXP_TYPE_RC_EC ||
>> type == PCI_EXP_TYPE_DOWNSTREAM ||
>> - info->severity == AER_NONFATAL) {
>> + info->severity == AER_NONFATAL ||
>> + (pcie_is_cxl(dev) && type == PCI_EXP_TYPE_UPSTREAM)) {
>>
>> /* Link is still healthy for IO reads */
>> pci_read_config_dword(dev, aer + PCI_ERR_UNCOR_STATUS,
> Just a heads-up, there's another patch pending by Shuai Xue (+cc)
> which touches the same code lines. It re-enables error reporting
> for PCIe Upstream Ports (as well as Endpoints) under certain
> conditions:
>
> https://lore.kernel.org/all/20241112135419.59491-3-xueshuai@xxxxxxxxxxxxxxxxx/
>
> That was originally disabled by Keith Busch (+cc) with commit
> 9d938ea53b26 ("PCI/AER: Don't read upstream ports below fatal errors").
>
> There's some merge conflict potential here if your series goes into
> the cxl tree and Shuai's patch into the pci tree in the next cycle.
>
> Thanks,
>
> Lukas
Thanks Lukas I took a look at the patchset and reached out to Shuai (you're CC'd). Sorry, I thought
I responded here earlier.
Regards,
Terry
