On Tue, Nov 19, 2024 at 09:15:45AM +0100, Lorenzo Bianconi wrote: > > Airoha EN7581 has a hw bug asserting/releasing PCIE_PE_RSTB signal > > causing occasional PCIe link down issues. In order to overcome the > > problem, PCIE_RSTB signals are not asserted/released during device probe or > > suspend/resume phase and the PCIe block is reset using REG_PCI_CONTROL > > (0x88) and REG_RESET_CONTROL (0x834) registers available in the clock > > module running clk_bulk_prepare_enable in mtk_pcie_en7581_power_up(). > > > > Introduce flags field in the mtk_gen3_pcie_pdata struct in order to > > specify per-SoC capabilities. > > > > Tested-by: Hui Ma <hui.ma@xxxxxxxxxx> > > Signed-off-by: Lorenzo Bianconi <lorenzo@xxxxxxxxxx> > > Hi Jianjun and Bjorn, > > any news about this patch? Thanks in advance. The v6.13 merge window is open now, so we will merge new content for v6.14 soon after v6.13-rc1 is tagged, which will probably be Dec 1. > > --- > > Changes in v3: > > - cosmetics > > - Link to v2: https://lore.kernel.org/r/20241104-pcie-en7581-rst-fix-v2-1-ffe5839c76d8@xxxxxxxxxx > > > > Changes in v2: > > - introduce flags field in mtk_gen3_pcie_flags struct instead of adding > > reset callback > > - fix the leftover case in mtk_pcie_suspend_noirq routine > > - add more comments > > - Link to v1: https://lore.kernel.org/r/20240920-pcie-en7581-rst-fix-v1-1-1043fb63ffc9@xxxxxxxxxx > > --- > > drivers/pci/controller/pcie-mediatek-gen3.c | 60 ++++++++++++++++++++--------- > > 1 file changed, 42 insertions(+), 18 deletions(-) > > > > diff --git a/drivers/pci/controller/pcie-mediatek-gen3.c b/drivers/pci/controller/pcie-mediatek-gen3.c > > index 16a55711a7f3bdc8d6620029e3d2cfdd40b537b7..443072adb9b52a6934a5d1e38eb6fca5f86a1e13 100644 > > --- a/drivers/pci/controller/pcie-mediatek-gen3.c > > +++ b/drivers/pci/controller/pcie-mediatek-gen3.c > > @@ -128,10 +128,18 @@ > > > > struct mtk_gen3_pcie; > > > > +enum mtk_gen3_pcie_flags { > > + SKIP_PCIE_RSTB = BIT(0), /* skip PCIE_RSTB signals configuration > > + * during device probing or suspend/resume > > + * phase in order to avoid hw bugs/issues. > > + */ > > +}; > > + > > /** > > * struct mtk_gen3_pcie_pdata - differentiate between host generations > > * @power_up: pcie power_up callback > > * @phy_resets: phy reset lines SoC data. > > + * @flags: pcie device flags. > > */ > > struct mtk_gen3_pcie_pdata { > > int (*power_up)(struct mtk_gen3_pcie *pcie); > > @@ -139,6 +147,7 @@ struct mtk_gen3_pcie_pdata { > > const char *id[MAX_NUM_PHY_RESETS]; > > int num_resets; > > } phy_resets; > > + u32 flags; > > }; > > > > /** > > @@ -405,22 +414,34 @@ static int mtk_pcie_startup_port(struct mtk_gen3_pcie *pcie) > > val |= PCIE_DISABLE_DVFSRC_VLT_REQ; > > writel_relaxed(val, pcie->base + PCIE_MISC_CTRL_REG); > > > > - /* Assert all reset signals */ > > - val = readl_relaxed(pcie->base + PCIE_RST_CTRL_REG); > > - val |= PCIE_MAC_RSTB | PCIE_PHY_RSTB | PCIE_BRG_RSTB | PCIE_PE_RSTB; > > - writel_relaxed(val, pcie->base + PCIE_RST_CTRL_REG); > > - > > /* > > - * Described in PCIe CEM specification sections 2.2 (PERST# Signal) > > - * and 2.2.1 (Initial Power-Up (G3 to S0)). > > - * The deassertion of PERST# should be delayed 100ms (TPVPERL) > > - * for the power and clock to become stable. > > + * Airoha EN7581 has a hw bug asserting/releasing PCIE_PE_RSTB signal > > + * causing occasional PCIe link down. In order to overcome the issue, > > + * PCIE_RSTB signals are not asserted/released at this stage and the > > + * PCIe block is reset configuting REG_PCI_CONTROL (0x88) and > > + * REG_RESET_CONTROL (0x834) registers available in the clock module > > + * running clk_bulk_prepare_enable in mtk_pcie_en7581_power_up(). > > */ > > - msleep(100); > > - > > - /* De-assert reset signals */ > > - val &= ~(PCIE_MAC_RSTB | PCIE_PHY_RSTB | PCIE_BRG_RSTB | PCIE_PE_RSTB); > > - writel_relaxed(val, pcie->base + PCIE_RST_CTRL_REG); > > + if (!(pcie->soc->flags & SKIP_PCIE_RSTB)) { > > + /* Assert all reset signals */ > > + val = readl_relaxed(pcie->base + PCIE_RST_CTRL_REG); > > + val |= PCIE_MAC_RSTB | PCIE_PHY_RSTB | PCIE_BRG_RSTB | > > + PCIE_PE_RSTB; > > + writel_relaxed(val, pcie->base + PCIE_RST_CTRL_REG); > > + > > + /* > > + * Described in PCIe CEM specification sections 2.2 (PERST# Signal) > > + * and 2.2.1 (Initial Power-Up (G3 to S0)). > > + * The deassertion of PERST# should be delayed 100ms (TPVPERL) > > + * for the power and clock to become stable. > > + */ > > + msleep(PCIE_T_PVPERL_MS); > > + > > + /* De-assert reset signals */ > > + val &= ~(PCIE_MAC_RSTB | PCIE_PHY_RSTB | PCIE_BRG_RSTB | > > + PCIE_PE_RSTB); > > + writel_relaxed(val, pcie->base + PCIE_RST_CTRL_REG); > > + } > > > > /* Check if the link is up or not */ > > err = readl_poll_timeout(pcie->base + PCIE_LINK_STATUS_REG, val, > > @@ -1179,10 +1200,12 @@ static int mtk_pcie_suspend_noirq(struct device *dev) > > return err; > > } > > > > - /* Pull down the PERST# pin */ > > - val = readl_relaxed(pcie->base + PCIE_RST_CTRL_REG); > > - val |= PCIE_PE_RSTB; > > - writel_relaxed(val, pcie->base + PCIE_RST_CTRL_REG); > > + if (!(pcie->soc->flags & SKIP_PCIE_RSTB)) { > > + /* Pull down the PERST# pin */ > > + val = readl_relaxed(pcie->base + PCIE_RST_CTRL_REG); > > + val |= PCIE_PE_RSTB; > > + writel_relaxed(val, pcie->base + PCIE_RST_CTRL_REG); > > + } > > > > dev_dbg(pcie->dev, "entered L2 states successfully"); > > > > @@ -1233,6 +1256,7 @@ static const struct mtk_gen3_pcie_pdata mtk_pcie_soc_en7581 = { > > .id[2] = "phy-lane2", > > .num_resets = 3, > > }, > > + .flags = SKIP_PCIE_RSTB, > > }; > > > > static const struct of_device_id mtk_pcie_of_match[] = { > > > > --- > > base-commit: ff80d707f3cb5e8d9ec0739e0e5ed42dea179125 > > change-id: 20240920-pcie-en7581-rst-fix-8161658c13c4 > > > > Best regards, > > -- > > Lorenzo Bianconi <lorenzo@xxxxxxxxxx> > >
