Since mtk_pcie_en7581_power_up() runs in non-atomic context, rely on msleep() routine instead of mdelay(). Signed-off-by: Lorenzo Bianconi <lorenzo@xxxxxxxxxx> --- drivers/pci/controller/pcie-mediatek-gen3.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/pci/controller/pcie-mediatek-gen3.c b/drivers/pci/controller/pcie-mediatek-gen3.c index 795f134e1970c504e8d9588c09a9c3ff51e5397e..aaec0cb6cc1c016d049e8a88148870de560b9ce2 100644 --- a/drivers/pci/controller/pcie-mediatek-gen3.c +++ b/drivers/pci/controller/pcie-mediatek-gen3.c @@ -926,7 +926,7 @@ static int mtk_pcie_en7581_power_up(struct mtk_gen3_pcie *pcie) * Wait for the time needed to complete the bulk assert in * mtk_pcie_setup for EN7581 SoC. */ - mdelay(PCIE_EN7581_RESET_TIME_MS); + msleep(PCIE_EN7581_RESET_TIME_MS); /* * Unlike the MediaTek controllers, the Airoha EN7581 requires PHY @@ -954,7 +954,7 @@ static int mtk_pcie_en7581_power_up(struct mtk_gen3_pcie *pcie) * Wait for the time needed to complete the bulk de-assert above. * This time is specific for EN7581 SoC. */ - mdelay(PCIE_EN7581_RESET_TIME_MS); + msleep(PCIE_EN7581_RESET_TIME_MS); /* MAC power on and enable transaction layer clocks */ reset_control_deassert(pcie->mac_reset); -- 2.47.0
