Before sending PME_TURN_OFF, don't test the LTSSM stat. Since it's safe
to send PME_TURN_OFF message regardless of whether the link is up or
down. So, there would be no need to test the LTSSM stat before sending
PME_TURN_OFF message.
Remove the L2 poll too, after the PME_TURN_OFF message is sent out.
Because the re-initialization would be done in dw_pcie_resume_noirq().
Signed-off-by: Richard Zhu <hongxing.zhu@xxxxxxx>
---
.../pci/controller/dwc/pcie-designware-host.c | 20 ++++---------------
1 file changed, 4 insertions(+), 16 deletions(-)
diff --git a/drivers/pci/controller/dwc/pcie-designware-host.c b/drivers/pci/controller/dwc/pcie-designware-host.c
index f86347452026..64c49adf81d2 100644
--- a/drivers/pci/controller/dwc/pcie-designware-host.c
+++ b/drivers/pci/controller/dwc/pcie-designware-host.c
@@ -917,7 +917,6 @@ static int dw_pcie_pme_turn_off(struct dw_pcie *pci)
int dw_pcie_suspend_noirq(struct dw_pcie *pci)
{
u8 offset = dw_pcie_find_capability(pci, PCI_CAP_ID_EXP);
- u32 val;
int ret = 0;
/*
@@ -927,23 +926,12 @@ int dw_pcie_suspend_noirq(struct dw_pcie *pci)
if (dw_pcie_readw_dbi(pci, offset + PCI_EXP_LNKCTL) & PCI_EXP_LNKCTL_ASPM_L1)
return 0;
- /* Only send out PME_TURN_OFF when PCIE link is up */
- if (dw_pcie_get_ltssm(pci) > DW_PCIE_LTSSM_DETECT_ACT) {
- if (pci->pp.ops->pme_turn_off)
- pci->pp.ops->pme_turn_off(&pci->pp);
- else
- ret = dw_pcie_pme_turn_off(pci);
-
+ if (pci->pp.ops->pme_turn_off) {
+ pci->pp.ops->pme_turn_off(&pci->pp);
+ } else {
+ ret = dw_pcie_pme_turn_off(pci);
if (ret)
return ret;
-
- ret = read_poll_timeout(dw_pcie_get_ltssm, val, val == DW_PCIE_LTSSM_L2_IDLE,
- PCIE_PME_TO_L2_TIMEOUT_US/10,
- PCIE_PME_TO_L2_TIMEOUT_US, false, pci);
- if (ret) {
- dev_err(pci->dev, "Timeout waiting for L2 entry! LTSSM: 0x%x\n", val);
- return ret;
- }
}
dw_pcie_stop_link(pci);
--
2.37.1
