i.MX7D only has one PCIe controller, so controller_id should always be 0.
The previous code is incorrect although yielding the correct result. Fix by
removing IMX7D from the switch case branch.
Signed-off-by: Richard Zhu <hongxing.zhu@xxxxxxx>
Reviewed-by: Frank Li <Frank.Li@xxxxxxx>
---
"This is just *wrong*. You cannot hardcode the MMIO address in the driver.
Even though this code is old, you should fix it instead of building on top
of it.
- Mani"
IMX7D here is wrong athough check IMX8MQ_PCIE2_BASE_ADDR is not good
method. Previously try to use 'linux,pci-domain' to replace this check
logic. Need more discussion to improve it and keep old compatiblity.
Let's fix this code error firstly.
---
drivers/pci/controller/dwc/pci-imx6.c | 1 -
1 file changed, 1 deletion(-)
diff --git a/drivers/pci/controller/dwc/pci-imx6.c b/drivers/pci/controller/dwc/pci-imx6.c
index 462decd1d589..996333e9017d 100644
--- a/drivers/pci/controller/dwc/pci-imx6.c
+++ b/drivers/pci/controller/dwc/pci-imx6.c
@@ -1342,7 +1342,6 @@ static int imx_pcie_probe(struct platform_device *pdev)
switch (imx_pcie->drvdata->variant) {
case IMX8MQ:
case IMX8MQ_EP:
- case IMX7D:
if (dbi_base->start == IMX8MQ_PCIE2_BASE_ADDR)
imx_pcie->controller_id = 1;
break;
--
2.37.1
