[PATCH v3 02/12] dt-bindings: pinctrl: Add RaspberryPi RP1 gpio/pinctrl/pinmux bindings

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Add device tree bindings for the gpio/pin/mux controller that is part of
the RP1 multi function device, and relative entries in MAINTAINERS file.

Signed-off-by: Andrea della Porta <andrea.porta@xxxxxxxx>
---
 .../pinctrl/raspberrypi,rp1-gpio.yaml         | 163 ++++++++++++++++++
 MAINTAINERS                                   |   2 +
 2 files changed, 165 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/pinctrl/raspberrypi,rp1-gpio.yaml

diff --git a/Documentation/devicetree/bindings/pinctrl/raspberrypi,rp1-gpio.yaml b/Documentation/devicetree/bindings/pinctrl/raspberrypi,rp1-gpio.yaml
new file mode 100644
index 000000000000..465a53a6d84f
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/raspberrypi,rp1-gpio.yaml
@@ -0,0 +1,163 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/raspberrypi,rp1-gpio.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: RaspberryPi RP1 GPIO/Pinconf/Pinmux Controller submodule
+
+maintainers:
+  - Andrea della Porta <andrea.porta@xxxxxxxx>
+
+description:
+  The RP1 chipset is a Multi Function Device containing, among other sub-peripherals,
+  a gpio/pinconf/mux controller whose 54 pins are grouped into 3 banks. It works also
+  as an interrupt controller for those gpios.
+
+properties:
+  compatible:
+    const: raspberrypi,rp1-gpio
+
+  reg:
+    maxItems: 3
+    description: One reg specifier for each one of the 3 pin banks.
+
+  '#gpio-cells':
+    description: The first cell is the pin number and the second cell is used
+      to specify the flags (see include/dt-bindings/gpio/gpio.h).
+    const: 2
+
+  gpio-controller: true
+
+  gpio-ranges:
+    maxItems: 1
+
+  gpio-line-names:
+    maxItems: 54
+
+  interrupts:
+    maxItems: 3
+    description: One interrupt specifier for each one of the 3 pin banks.
+
+  '#interrupt-cells':
+    description:
+      Specifies the Bank number [0, 1, 2] and Flags as defined in
+      include/dt-bindings/interrupt-controller/irq.h.
+    const: 2
+
+  interrupt-controller: true
+
+additionalProperties:
+  anyOf:
+    - type: object
+      additionalProperties: false
+      allOf:
+        - $ref: pincfg-node.yaml#
+        - $ref: pinmux-node.yaml#
+
+      description:
+        Pin controller client devices use pin configuration subnodes (children
+        and grandchildren) for desired pin configuration.
+        Client device subnodes use below standard properties.
+
+      properties:
+        pins:
+          description:
+            A string (or list of strings) adhering to the pattern 'gpio[0-5][0-9]'
+        function: true
+        bias-disable: true
+        bias-pull-down: true
+        bias-pull-up: true
+        slew-rate:
+          description: 0 is slow slew rate, 1 is fast slew rate
+          enum: [ 0, 1 ]
+        drive-strength:
+          enum: [ 2, 4, 8, 12 ]
+
+    - type: object
+      additionalProperties:
+        $ref: "#/additionalProperties/anyOf/0"
+
+allOf:
+  - $ref: pinctrl.yaml#
+
+required:
+  - reg
+  - compatible
+  - '#gpio-cells'
+  - gpio-controller
+  - interrupts
+  - '#interrupt-cells'
+  - interrupt-controller
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    rp1 {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        rp1_gpio: pinctrl@c0400d0000 {
+            reg = <0xc0 0x400d0000  0x0 0xc000>,
+                  <0xc0 0x400e0000  0x0 0xc000>,
+                  <0xc0 0x400f0000  0x0 0xc000>;
+            compatible = "raspberrypi,rp1-gpio";
+            gpio-controller;
+            #gpio-cells = <2>;
+            interrupt-controller;
+            #interrupt-cells = <2>;
+            interrupts = <0 IRQ_TYPE_LEVEL_HIGH>,
+                         <1 IRQ_TYPE_LEVEL_HIGH>,
+                         <2 IRQ_TYPE_LEVEL_HIGH>;
+            gpio-line-names =
+                   "ID_SDA", // GPIO0
+                   "ID_SCL", // GPIO1
+                   "GPIO2", "GPIO3", "GPIO4", "GPIO5", "GPIO6",
+                   "GPIO7", "GPIO8", "GPIO9", "GPIO10", "GPIO11",
+                   "GPIO12", "GPIO13", "GPIO14", "GPIO15", "GPIO16",
+                   "GPIO17", "GPIO18", "GPIO19", "GPIO20", "GPIO21",
+                   "GPIO22", "GPIO23", "GPIO24", "GPIO25", "GPIO26",
+                   "GPIO27",
+                   "PCIE_RP1_WAKE", // GPIO28
+                   "FAN_TACH", // GPIO29
+                   "HOST_SDA", // GPIO30
+                   "HOST_SCL", // GPIO31
+                   "ETH_RST_N", // GPIO32
+                   "", // GPIO33
+                   "CD0_IO0_MICCLK", // GPIO34
+                   "CD0_IO0_MICDAT0", // GPIO35
+                   "RP1_PCIE_CLKREQ_N", // GPIO36
+                   "", // GPIO37
+                   "CD0_SDA", // GPIO38
+                   "CD0_SCL", // GPIO39
+                   "CD1_SDA", // GPIO40
+                   "CD1_SCL", // GPIO41
+                   "USB_VBUS_EN", // GPIO42
+                   "USB_OC_N", // GPIO43
+                   "RP1_STAT_LED", // GPIO44
+                   "FAN_PWM", // GPIO45
+                   "CD1_IO0_MICCLK", // GPIO46
+                   "2712_WAKE", // GPIO47
+                   "CD1_IO1_MICDAT1", // GPIO48
+                   "EN_MAX_USB_CUR", // GPIO49
+                   "", // GPIO50
+                   "", // GPIO51
+                   "", // GPIO52
+                   ""; // GPIO53
+
+            rp1-uart0-14-15 {
+                pin_txd {
+                    function = "uart0";
+                    pins = "gpio14";
+                    bias-disable;
+                };
+
+                pin_rxd {
+                    function = "uart0";
+                    pins = "gpio15";
+                    bias-pull-up;
+                };
+            };
+        };
+    };
diff --git a/MAINTAINERS b/MAINTAINERS
index 75a66e3e34c9..c55d12550246 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -19384,7 +19384,9 @@ RASPBERRY PI RP1 PCI DRIVER
 M:	Andrea della Porta <andrea.porta@xxxxxxxx>
 S:	Maintained
 F:	Documentation/devicetree/bindings/clock/raspberrypi,rp1-clocks.yaml
+F:	Documentation/devicetree/bindings/pinctrl/raspberrypi,rp1-gpio.yaml
 F:	include/dt-bindings/clock/rp1.h
+F:	include/dt-bindings/misc/rp1.h
 
 RC-CORE / LIRC FRAMEWORK
 M:	Sean Young <sean@xxxxxxxx>
-- 
2.35.3





[Index of Archives]     [DMA Engine]     [Linux Coverity]     [Linux USB]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Greybus]

  Powered by Linux