On 10/25/24 05:45, Stanimir Varbanov wrote:
The default input reference clock for the PHY PLL is 100Mhz, except for some devices where it is 54Mhz like bcm2712C1 and bcm2712D0. To implement this adjustments introduce a new .post_setup op in pcie_cfg_data and call it at the end of brcm_pcie_setup function. The bcm2712 .post_setup callback implements the required MDIO writes that switch the PLL refclk and also change PHY PM clock period. Without this RPi5 PCIex1 is unable to enumerate endpoint devices on the expansion connector. Signed-off-by: Stanimir Varbanov <svarbanov@xxxxxxx>
Reviewed-by: Florian Fainelli <florian.fainelli@xxxxxxxxxxxx> -- Florian