On Fri, 13 Sep 2024, Ilpo Järvinen wrote: > This series has the remaining patches of the AER & DPC TLP Log handling > consolidation and now includes a few minor improvements to the earlier > accepted TLP Logging code. > > v6: > - Preserve "AER:"/"DPC:" prefix on the printed TLP line > - New patch to add "AER:" also on other lines of the AER error dump Hi Bjorn, A small reminder this series exists. -- i. > v5: > - Fix build with AER=y and DPC=n > - Match kerneldoc and function parameter name > > v4: > - Added patches: > - Remove EXPORT of pcie_read_tlp_log() > - Moved code to pcie/tlp.c and build only with AER enabled > - Match variables in prototype and function > - int -> unsigned int conversion > - eetlp_prefix_max into own patch > - struct pcie_tlp_log param consistently called "log" within tlp.c > - Moved function prototypes into drivers/pci/pci.h > - Describe AER/DPC differences more clearly in one commit message > > v3: > - Small rewording in a commit message > > v2: > - Don't add EXPORT()s > - Don't include igxbe changes > - Don't use pr_cont() as it's incompatible with pci_err() and according > to Andy Shevchenko should not be used in the first place > > Ilpo Järvinen (8): > PCI: Don't expose pcie_read_tlp_log() outside of PCI subsystem > PCI: Move TLP Log handling to own file > PCI: Make pcie_read_tlp_log() signature same > PCI: Use unsigned int i in pcie_read_tlp_log() > PCI: Store # of supported End-End TLP Prefixes > PCI: Add TLP Prefix reading into pcie_read_tlp_log() > PCI: Create helper to print TLP Header and Prefix Log > PCI/AER: Add prefixes to printouts > > drivers/pci/ats.c | 2 +- > drivers/pci/pci.c | 28 --------- > drivers/pci/pci.h | 9 +++ > drivers/pci/pcie/Makefile | 2 +- > drivers/pci/pcie/aer.c | 26 ++++---- > drivers/pci/pcie/dpc.c | 14 ++--- > drivers/pci/pcie/tlp.c | 109 ++++++++++++++++++++++++++++++++++ > drivers/pci/probe.c | 14 +++-- > include/linux/aer.h | 3 +- > include/linux/pci.h | 2 +- > include/uapi/linux/pci_regs.h | 2 + > 11 files changed, 149 insertions(+), 62 deletions(-) > create mode 100644 drivers/pci/pcie/tlp.c > >