Hi Andrea,
On Mon, 7 Oct 2024 14:39:53 +0200
Andrea della Porta <andrea.porta@xxxxxxxx> wrote:
> RaspberryPi RP1 is a multi function PCI endpoint device that
> exposes several subperipherals via PCI BAR.
> Add a dtb overlay that will be compiled into a binary blob
> and linked in the RP1 driver.
> This overlay offers just minimal support to represent the
> RP1 device itself, the sub-peripherals will be added by
> future patches.
>
> Signed-off-by: Andrea della Porta <andrea.porta@xxxxxxxx>
> ---
...
> +/ {
> + fragment@0 {
> + target-path="";
> + __overlay__ {
> + compatible = "pci1de4,1";
The compatible is not needed here. Indeed, it will be added by the PCI core
when it scans the bus and adds the missing nodes.
https://elixir.bootlin.com/linux/v6.12-rc2/source/drivers/pci/of_property.c#L383
> + #address-cells = <3>;
> + #size-cells = <2>;
> +
> + pci_ep_bus: pci-ep-bus@1 {
> + compatible = "simple-bus";
> + ranges = <0xc0 0x40000000
> + 0x01 0x00 0x00000000
> + 0x00 0x00400000>;
> + dma-ranges = <0x10 0x00000000
> + 0x43000000 0x10 0x00000000
> + 0x10 0x00000000>;
> + #address-cells = <2>;
> + #size-cells = <2>;
> + interrupt-controller;
> + interrupt-parent = <&pci_ep_bus>;
> + #interrupt-cells = <2>;
Not sure this node should be an interrupt controller.
The interrupt controller is the PCI device itself (i.e.the node
where the overlay is applied).
Best regards,
Hervé
