[PATCH v2 -next 10/11] arm64: dts: broadcom: bcm2712: Add PCIe DT nodes

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Add PCIe devicetree nodes, plus needed reset and mip MSI-X
controllers.

Signed-off-by: Stanimir Varbanov <svarbanov@xxxxxxx>
---
 arch/arm64/boot/dts/broadcom/bcm2712.dtsi | 166 ++++++++++++++++++++++
 1 file changed, 166 insertions(+)

diff --git a/arch/arm64/boot/dts/broadcom/bcm2712.dtsi b/arch/arm64/boot/dts/broadcom/bcm2712.dtsi
index 6e5a984c1d4e..9dd127d4c9a2 100644
--- a/arch/arm64/boot/dts/broadcom/bcm2712.dtsi
+++ b/arch/arm64/boot/dts/broadcom/bcm2712.dtsi
@@ -192,6 +192,12 @@ soc: soc@107c000000 {
 		#address-cells = <1>;
 		#size-cells = <1>;
 
+		pcie_rescal: reset-controller@119500 {
+			compatible = "brcm,bcm7216-pcie-sata-rescal";
+			reg = <0x00119500 0x10>;
+			#reset-cells = <0>;
+		};
+
 		sdio1: mmc@fff000 {
 			compatible = "brcm,bcm2712-sdhci",
 				     "brcm,sdhci-brcmstb";
@@ -204,6 +210,12 @@ sdio1: mmc@fff000 {
 			mmc-ddr-3_3v;
 		};
 
+		bcm_reset: reset-controller@1504318 {
+			compatible = "brcm,brcmstb-reset";
+			reg = <0x01504318 0x30>;
+			#reset-cells = <1>;
+		};
+
 		system_timer: timer@7c003000 {
 			compatible = "brcm,bcm2835-system-timer";
 			reg = <0x7c003000 0x1000>;
@@ -267,6 +279,160 @@ gicv2: interrupt-controller@7fff9000 {
 		};
 	};
 
+	axi@1000000000 {
+		compatible = "simple-bus";
+		#address-cells = <2>;
+		#size-cells = <2>;
+
+		ranges = <0x00 0x00000000 0x10 0x00000000 0x01 0x00000000>,
+			 <0x14 0x00000000 0x14 0x00000000 0x04 0x00000000>,
+			 <0x18 0x00000000 0x18 0x00000000 0x04 0x00000000>,
+			 <0x1c 0x00000000 0x1c 0x00000000 0x04 0x00000000>;
+
+		dma-ranges = <0x00 0x00000000 0x00 0x00000000 0x10 0x00000000>,
+			     <0x14 0x00000000 0x14 0x00000000 0x04 0x00000000>,
+			     <0x18 0x00000000 0x18 0x00000000 0x04 0x00000000>,
+			     <0x1c 0x00000000 0x1c 0x00000000 0x04 0x00000000>;
+
+		pcie0: pcie@100000 {
+			compatible = "brcm,bcm2712-pcie";
+			reg = <0x00 0x00100000 0x00 0x9310>;
+			device_type = "pci";
+			linux,pci-domain = <0>;
+			max-link-speed = <2>;
+			bus-range = <0x00 0xff>;
+			num-lanes = <1>;
+			#address-cells = <3>;
+			#interrupt-cells = <1>;
+			#size-cells = <2>;
+			interrupt-parent = <&gicv2>;
+			interrupts = <GIC_SPI 213 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 214 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "pcie", "msi";
+			interrupt-map-mask = <0x0 0x0 0x0 0x7>;
+			interrupt-map = <0 0 0 1 &gicv2 GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 2 &gicv2 GIC_SPI 210 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 3 &gicv2 GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 4 &gicv2 GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH>;
+			resets = <&bcm_reset 42>, <&pcie_rescal>;
+			reset-names = "bridge", "rescal";
+			msi-controller;
+			msi-parent = <&pcie0>;
+
+			ranges = <0x02000000 0x00 0x00000000
+				  0x17 0x00000000
+				  0x00 0xfffffffc>,
+				 <0x43000000 0x04 0x00000000
+				  0x14 0x00000000
+				  0x3 0x00000000>;
+
+			dma-ranges = <0x43000000 0x10 0x00000000
+				      0x00 0x00000000
+				      0x10 0x00000000>;
+
+			status = "disabled";
+		};
+
+		pcie1: pcie@110000 {
+			compatible = "brcm,bcm2712-pcie";
+			reg = <0x00 0x00110000 0x00 0x9310>;
+			device_type = "pci";
+			linux,pci-domain = <1>;
+			max-link-speed = <2>;
+			bus-range = <0x00 0xff>;
+			num-lanes = <1>;
+			#address-cells = <3>;
+			#interrupt-cells = <1>;
+			#size-cells = <2>;
+			interrupt-parent = <&gicv2>;
+			interrupts = <GIC_SPI 223 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 224 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "pcie", "msi";
+			interrupt-map-mask = <0x0 0x0 0x0 0x7>;
+			interrupt-map = <0 0 0 1 &gicv2 GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 2 &gicv2 GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 3 &gicv2 GIC_SPI 221 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 4 &gicv2 GIC_SPI 222 IRQ_TYPE_LEVEL_HIGH>;
+			resets = <&bcm_reset 43>, <&pcie_rescal>;
+			reset-names = "bridge", "rescal";
+			msi-parent = <&mip1>;
+
+			ranges = <0x02000000 0x00 0x00000000
+				  0x1b 0x00000000
+				  0x00 0xfffffffc>,
+				 <0x43000000 0x04 0x00000000
+				  0x18 0x00000000
+				  0x03 0x00000000>;
+
+			dma-ranges = <0x03000000 0x10 0x00000000
+				      0x00 0x00000000
+				      0x10 0x00000000>;
+
+			status = "disabled";
+		};
+
+		pcie2: pcie@120000 {
+			compatible = "brcm,bcm2712-pcie";
+			reg = <0x00 0x00120000 0x00 0x9310>;
+			device_type = "pci";
+			linux,pci-domain = <2>;
+			max-link-speed = <2>;
+			bus-range = <0x00 0xff>;
+			num-lanes = <4>;
+			#address-cells = <3>;
+			#interrupt-cells = <1>;
+			#size-cells = <2>;
+			interrupt-parent = <&gicv2>;
+			interrupts = <GIC_SPI 233 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 234 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "pcie", "msi";
+			interrupt-map-mask = <0x0 0x0 0x0 0x7>;
+			interrupt-map = <0 0 0 1 &gicv2 GIC_SPI 229 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 2 &gicv2 GIC_SPI 230 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 3 &gicv2 GIC_SPI 231 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 4 &gicv2 GIC_SPI 232 IRQ_TYPE_LEVEL_HIGH>;
+			resets = <&bcm_reset 44>, <&pcie_rescal>;
+			reset-names = "bridge", "rescal";
+			msi-parent = <&mip0>;
+
+			ranges = <0x02000000 0x00 0x00000000
+				  0x1f 0x00000000
+				  0x00 0xfffffffc>,
+				 <0x43000000 0x04 0x00000000
+				  0x1c 0x00000000
+				  0x03 0x00000000>;
+
+			dma-ranges = <0x02000000 0x00 0x00000000
+				      0x1f 0x00000000
+				      0x00 0x00400000>,
+				     <0x43000000 0x10 0x00000000
+				      0x00 0x00000000
+				      0x10 0x00000000>;
+
+			status = "disabled";
+		};
+
+		mip0: msi-controller@130000 {
+			compatible = "brcm,bcm2712-mip";
+			reg = <0x00 0x00130000 0x00 0xc0>,
+			      <0xff 0xfffff000 0x00 0x1000>;
+			msi-controller;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			msi-ranges = <&gicv2 GIC_SPI 128 IRQ_TYPE_EDGE_RISING 64>;
+		};
+
+		mip1: msi-controller@131000 {
+			compatible = "brcm,bcm2712-mip";
+			reg = <0x00 0x00131000 0x00 0xc0>,
+			      <0xff 0xffffe000 0x00 0x1000>;
+			msi-controller;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			msi-ranges = <&gicv2 GIC_SPI 255 IRQ_TYPE_EDGE_RISING 8>;
+		};
+	};
+
 	timer {
 		compatible = "arm,armv8-timer";
 		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) |
-- 
2.35.3





[Index of Archives]     [DMA Engine]     [Linux Coverity]     [Linux USB]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Greybus]

  Powered by Linux