On Fri, Aug 30, 2024 at 8:52 AM Frank Li <Frank.li@xxxxxxx> wrote: > > On Thu, Aug 29, 2024 at 03:21:13PM -0700, Tim Harvey wrote: > > On Thu, Aug 29, 2024 at 3:00 PM Bjorn Helgaas <helgaas@xxxxxxxxxx> wrote: > > > > > > On Thu, Aug 29, 2024 at 05:43:42PM -0400, Frank Li wrote: > > > > On Thu, Aug 29, 2024 at 04:22:35PM -0500, Bjorn Helgaas wrote: > > > > > On Wed, Aug 28, 2024 at 02:40:33PM -0700, Tim Harvey wrote: > > > > > > Greetings, > > > > > > > > > > > > I have a user that is using an IMX8MM SoC (dwc controller) with a > > > > > > miniPCIe card that has a PEX8112 PCI-to-PCIe bridge to a legacy PCI > > > > > > device and the device is not getting a valid interrupt. > > > > > > > > > > Does pci-imx6.c support INTx at all? > > > > > > > > Yes, dwc controller map INTx message to 4 irq lines, which connect to GIC. > > > > we tested it by add nomsi in kernel command line. > > > > > > Thanks, Frank. Can you point me to the dwc code where this happens? > > > Maybe I can remember this for next time or add a comment to help > > > people find it. > > > > > > Bjorn > > > > Bjorn and Frank, > > > > I provided some misinformation regarding IMX6 - my original testing > > was flawed. When testing the IMX6DL linked to a XIO2001 with a legacy > > PCI device behind it the device driver is given an appropriate legacy > > IRQ. > > > > Regarding IMX8MM linked to a PEX8112 bridge with a legacy PCI device > > behind it; the user gets a -28 (ENOSPC) when requesting an IRQ from > > the driver but I don't have the hardware or the driver for that in > > hand so I need to wait for more details. I don't see any reason why > > this case would not work as it works on an IMX6DL. > > Do you have chance to try other arm64 platform? Maybe defconfig cause this > difference. CONFIG_PCIEPORTBUS=y is enabled default in arm64, but not > at arm32. > Frank, It's unclear what other platforms they have been able to run this on. I'll have to wait for the hardware in the form of a miniPCIe card. The card showing the issue on imx8mm is a DDC BU-67114 [1]. Best Regards, Tim [1]
