Re: [PATCH v5 05/12] PCI: brcmstb: Use swinit reset if available

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Wed, Jul 31, 2024 at 06:28:19PM -0400, Jim Quinlan wrote:
> The 7712 SOC adds a software init reset device for the PCIe HW.
> If found in the DT node, use it.
> 
> Signed-off-by: Jim Quinlan <james.quinlan@xxxxxxxxxxxx>
> ---
>  drivers/pci/controller/pcie-brcmstb.c | 19 +++++++++++++++++++
>  1 file changed, 19 insertions(+)
> 
> diff --git a/drivers/pci/controller/pcie-brcmstb.c b/drivers/pci/controller/pcie-brcmstb.c
> index 4d68fe318178..948fd4d176bc 100644
> --- a/drivers/pci/controller/pcie-brcmstb.c
> +++ b/drivers/pci/controller/pcie-brcmstb.c
> @@ -266,6 +266,7 @@ struct brcm_pcie {
>  	struct reset_control	*rescal;
>  	struct reset_control	*perst_reset;
>  	struct reset_control	*bridge_reset;
> +	struct reset_control	*swinit_reset;
>  	int			num_memc;
>  	u64			memc_size[PCIE_BRCM_MAX_MEMC];
>  	u32			hw_rev;
> @@ -1633,12 +1634,30 @@ static int brcm_pcie_probe(struct platform_device *pdev)
>  	if (IS_ERR(pcie->bridge_reset))
>  		return PTR_ERR(pcie->bridge_reset);
>  
> +	pcie->swinit_reset = devm_reset_control_get_optional_exclusive(&pdev->dev, "swinit");
> +	if (IS_ERR(pcie->swinit_reset))
> +		return PTR_ERR(pcie->swinit_reset);
> +
>  	ret = clk_prepare_enable(pcie->clk);
>  	if (ret)
>  		return dev_err_probe(&pdev->dev, ret, "could not enable clock\n");
>  
>  	pcie->bridge_sw_init_set(pcie, 0);
>  
> +	if (pcie->swinit_reset) {

You already have a callback called 'bridge_sw_init_set', so this 'swinit_reset'
is different from 'bridge_sw_init'? If so, does it make sense to move this into
the callback itself to have all reset sequence in one place?

- Mani

> +		ret = reset_control_assert(pcie->swinit_reset);
> +		if (dev_err_probe(&pdev->dev, ret, "could not assert reset 'swinit'\n"))
> +			goto clk_disable_unprepare;
> +
> +		/* HW team recommends 1us for proper sync and propagation of reset */
> +		udelay(1);
> +
> +		ret = reset_control_deassert(pcie->swinit_reset);
> +		if (dev_err_probe(&pdev->dev, ret,
> +				  "could not de-assert reset 'swinit' after asserting\n"))
> +			goto clk_disable_unprepare;
> +	}
> +
>  	ret = reset_control_reset(pcie->rescal);
>  	if (dev_err_probe(&pdev->dev, ret, "failed to deassert 'rescal'\n"))
>  		goto clk_disable_unprepare;
> -- 
> 2.17.1
> 

-- 
மணிவண்ணன் சதாசிவம்




[Index of Archives]     [DMA Engine]     [Linux Coverity]     [Linux USB]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Greybus]

  Powered by Linux