The 7712 SOC adds a software init reset device for the PCIe HW.
If found in the DT node, use it.
Signed-off-by: Jim Quinlan <james.quinlan@xxxxxxxxxxxx>
---
drivers/pci/controller/pcie-brcmstb.c | 19 +++++++++++++++++++
1 file changed, 19 insertions(+)
diff --git a/drivers/pci/controller/pcie-brcmstb.c b/drivers/pci/controller/pcie-brcmstb.c
index 4d68fe318178..948fd4d176bc 100644
--- a/drivers/pci/controller/pcie-brcmstb.c
+++ b/drivers/pci/controller/pcie-brcmstb.c
@@ -266,6 +266,7 @@ struct brcm_pcie {
struct reset_control *rescal;
struct reset_control *perst_reset;
struct reset_control *bridge_reset;
+ struct reset_control *swinit_reset;
int num_memc;
u64 memc_size[PCIE_BRCM_MAX_MEMC];
u32 hw_rev;
@@ -1633,12 +1634,30 @@ static int brcm_pcie_probe(struct platform_device *pdev)
if (IS_ERR(pcie->bridge_reset))
return PTR_ERR(pcie->bridge_reset);
+ pcie->swinit_reset = devm_reset_control_get_optional_exclusive(&pdev->dev, "swinit");
+ if (IS_ERR(pcie->swinit_reset))
+ return PTR_ERR(pcie->swinit_reset);
+
ret = clk_prepare_enable(pcie->clk);
if (ret)
return dev_err_probe(&pdev->dev, ret, "could not enable clock\n");
pcie->bridge_sw_init_set(pcie, 0);
+ if (pcie->swinit_reset) {
+ ret = reset_control_assert(pcie->swinit_reset);
+ if (dev_err_probe(&pdev->dev, ret, "could not assert reset 'swinit'\n"))
+ goto clk_disable_unprepare;
+
+ /* HW team recommends 1us for proper sync and propagation of reset */
+ udelay(1);
+
+ ret = reset_control_deassert(pcie->swinit_reset);
+ if (dev_err_probe(&pdev->dev, ret,
+ "could not de-assert reset 'swinit' after asserting\n"))
+ goto clk_disable_unprepare;
+ }
+
ret = reset_control_reset(pcie->rescal);
if (dev_err_probe(&pdev->dev, ret, "failed to deassert 'rescal'\n"))
goto clk_disable_unprepare;
--
2.17.1
