Hello PCIe maintainers! > This adds suspend to ram support for the PCIe (RC mode) on J7200 platform. > > In this 7th iteration, the i2c and mux patches were moved to dedicated > series ([1] and [2]). > The patch for the gpio-pca953x driver was removed. It will be sent > separately for further testing and discussion. > > No merge conflict with 6.10-rc4. > > [1]: https://lore.kernel.org/all/20240613-i2c-omap-wakeup-controller-during-suspend-v1-0-aab001eb1ad1@xxxxxxxxxxx/ > [2]: > https://lore.kernel.org/all/20240613-mux-mmio-resume-support-v1-0-4525bf56024a@xxxxxxxxxxx/ I noticed that this series has not been merged yet, even though it seemed that there were no remaining comments to address. Is there any reason why it has not been applied yet? Thanks, Gregory > > Regards, > > Thomas > > Signed-off-by: Thomas Richard <thomas.richard@xxxxxxxxxxx> > --- > Changes in v7: > - all: series rebased on Linux 6.10-rc4. > - i2c: patches moved to a dedicated series. > - mux: patches moved to a dedicated series. > - gpio-pca953x: patch removed, will be sent separately. > - Link to v6: https://lore.kernel.org/r/20240102-j7200-pcie-s2r-v6-0-4656ef6e6d66@xxxxxxxxxxx > > Changes in v6: > - i2c-omap: add a patch to remove __maybe_unused attribute of > omap_i2c_runtime_suspend() and omap_i2c_runtime_resume() > - i2c-omap: fix compile issue if CONFIG_PM_SLEEP is not set > - Link to v5: https://lore.kernel.org/r/20240102-j7200-pcie-s2r-v5-0-4b8c46711ded@xxxxxxxxxxx > > Changes in v5: > - all: series rebased on Linux 6.9-rc1 > - pinctrl-single: patch removed (already applied to the pinctrl tree) > - phy: patches moved to a dedicated series. > - pci: add T_PERST_CLK_US macro. > - pci-j721e: update the comments about T_PERST_CLK_US. > - Link to v4: https://lore.kernel.org/r/20240102-j7200-pcie-s2r-v4-0-6f1f53390c85@xxxxxxxxxxx > > Changes in v4: > - all: use SoB/Co-developed-by for patches initially developed by Théo > Lebrun. > - pinctrl-single: squash the two commits. > - i2c-omap: fix line lenghts of the comment in omap_i2c_suspend(). > - mux: mux_chip_resume() return 0 or at the first error. > - phy-j721e-wiz: clean code around dev_err_probe(). > - phy-j721e-wiz: use REF_CLK_100MHZ macros. > - pci: fix subject line for all PCI patches. > - pci-cadence: use fsleep() instead of usleep_range(). > - pci-cadence: remove cdns_torrent_clk_cleanup() call in > cdns_torrent_phy_resume_noirq(). > - pci-j721e: add a patch to use dev_err_probe() instead of dev_err() in the probe(). > - pci-j721e: fix unordered header files. > - pci-j721e: remove some log spammers. > - pci-j721e: add a missing clock disable in j721e_pcie_resume_noirq(). > - pci-j721e: simplify the patch "Add reset GPIO to struct j721e_pcie" > - Link to v3: https://lore.kernel.org/r/20240102-j7200-pcie-s2r-v3-0-5c2e4a3fac1f@xxxxxxxxxxx > > Changes in v3: > - pinctrl-single: split patch in two parts, a first patch to remove the > dead code, a second to move suspend()/resume() callbacks to noirq. > - i2c-omap: add a comments above the suspend_noirq() callback. > - mux: now mux_chip_resume() try to restores all muxes, then return 0 if > all is ok or the first failure. > - mmio: fix commit message. > - phy-j721e-wiz: add a patch to use dev_err_probe() instead of dev_err() in > the wiz_clock_init() function. > - phy-j721e-wiz: remove probe boolean for the wiz_clock_init(), rename the > function to wiz_clock_probe(), extract hardware configuration part in a > new function wiz_clock_init(). > - phy-cadence-torrent: use dev_err_probe() and fix commit messages > - pcie-cadence-host: remove probe boolean for the cdns_pcie_host_setup() > function and extract the link setup part in a new function > cdns_pcie_host_link_setup(). > - pcie-cadence-host: make cdns_pcie_host_init() global. > - pci-j721e: use the cdns_pcie_host_link_setup() cdns_pcie_host_init() > functions in the resume_noirq() callback. > - Link to v2: https://lore.kernel.org/r/20240102-j7200-pcie-s2r-v2-0-8e4f7d228ec2@xxxxxxxxxxx > > Changes in v2: > - all: fix commits messages. > - all: use DEFINE_NOIRQ_DEV_PM_OPS and pm_sleep_ptr macros. > - all: remove useless #ifdef CONFIG_PM. > - pinctrl-single: drop dead code > - mux: add mux_chip_resume() function in mux core. > - mmio: resume sequence is now a call to mux_chip_resume(). > - phy-cadence-torrent: fix typo in resume sequence (reset_control_assert() > instead of reset_control_put()). > - phy-cadence-torrent: use PHY instead of phy. > - pci-j721e: do not shadow cdns_pcie_host_setup return code in resume > sequence. > - pci-j721e: drop dead code. > - Link to v1: https://lore.kernel.org/r/20240102-j7200-pcie-s2r-v1-0-84e55da52400@xxxxxxxxxxx > > --- > Thomas Richard (5): > PCI: cadence: Extract link setup sequence from cdns_pcie_host_setup() > PCI: cadence: Set cdns_pcie_host_init() global > PCI: j721e: Use dev_err_probe() in the probe() function > PCI: Add T_PERST_CLK_US macro > PCI: j721e: Use T_PERST_CLK_US macro > > Théo Lebrun (2): > PCI: j721e: Add reset GPIO to struct j721e_pcie > PCI: j721e: Add suspend and resume support > > drivers/pci/controller/cadence/pci-j721e.c | 121 ++++++++++++++++++--- > drivers/pci/controller/cadence/pcie-cadence-host.c | 44 +++++--- > drivers/pci/controller/cadence/pcie-cadence.h | 12 ++ > drivers/pci/pci.h | 3 + > 4 files changed, 146 insertions(+), 34 deletions(-) > --- > base-commit: 7510725e693fb5e4b4cd17086cc5a49a7a065b9c > change-id: 20240102-j7200-pcie-s2r-ecb1a979e357 > > Best regards, > -- > Thomas Richard <thomas.richard@xxxxxxxxxxx>
