On Fr, 2024-07-05 at 13:46 -0400, Jim Quinlan wrote:
> On Thu, Jul 4, 2024 at 8:56 AM Stanimir Varbanov <svarbanov@xxxxxxx> wrote:
> >
> > Hi Jim,
> >
> > On 7/3/24 21:02, Jim Quinlan wrote:
> > > The 7712 SOC adds a software init reset device for the PCIe HW.
> > > If found in the DT node, use it.
> > >
> > > Signed-off-by: Jim Quinlan <james.quinlan@xxxxxxxxxxxx>
> > > ---
> > > drivers/pci/controller/pcie-brcmstb.c | 19 +++++++++++++++++++
> > > 1 file changed, 19 insertions(+)
> > >
> > > diff --git a/drivers/pci/controller/pcie-brcmstb.c b/drivers/pci/controller/pcie-brcmstb.c
> > > index 4104c3668fdb..69926ee5c961 100644
> > > --- a/drivers/pci/controller/pcie-brcmstb.c
> > > +++ b/drivers/pci/controller/pcie-brcmstb.c
> > > @@ -266,6 +266,7 @@ struct brcm_pcie {
> > > struct reset_control *rescal;
> > > struct reset_control *perst_reset;
> > > struct reset_control *bridge;
> > > + struct reset_control *swinit;
> > > int num_memc;
> > > u64 memc_size[PCIE_BRCM_MAX_MEMC];
> > > u32 hw_rev;
> > > @@ -1626,6 +1627,13 @@ static int brcm_pcie_probe(struct platform_device *pdev)
> > > dev_err(&pdev->dev, "could not enable clock\n");
> > > return ret;
> > > }
> > > +
> > > + pcie->swinit = devm_reset_control_get_optional_exclusive(&pdev->dev, "swinit");
> > > + if (IS_ERR(pcie->swinit)) {
> > > + ret = dev_err_probe(&pdev->dev, PTR_ERR(pcie->swinit),
> > > + "failed to get 'swinit' reset\n");
> > > + goto clk_out;
> > > + }
> > > pcie->rescal = devm_reset_control_get_optional_shared(&pdev->dev, "rescal");
> > > if (IS_ERR(pcie->rescal)) {
> > > ret = PTR_ERR(pcie->rescal);
> > > @@ -1637,6 +1645,17 @@ static int brcm_pcie_probe(struct platform_device *pdev)
> > > goto clk_out;
> > > }
> > >
> > > + ret = reset_control_assert(pcie->swinit);
> > > + if (ret) {
> > > + dev_err_probe(&pdev->dev, ret, "could not assert reset 'swinit'\n");
> > > + goto clk_out;
> > > + }
> > > + ret = reset_control_deassert(pcie->swinit);
> > > + if (ret) {
> > > + dev_err(&pdev->dev, "could not de-assert reset 'swinit' after asserting\n");
> > > + goto clk_out;
> > > + }
> >
> > why not call reset_control_reset(pcie->swinit) directly?
> Hi Stan,
>
> There is no reset_control_reset() method defined for reset-brcmstb.c.
> The only reason I can
> think of for this is that it allows the callers of assert/deassert to
> insert a delay if desired.
The main reason for the existence of reset_control_reset() is that
there are reset controllers that can only be triggered (e.g. by writing
a bit to a self-clearing register) to produce a complete reset pulse,
with assertion, delay, and deassertion all handled by the reset
controller.
regards
Philipp
