Hi Jim,
On 7/3/24 21:02, Jim Quinlan wrote:
> The 7712 SOC adds a software init reset device for the PCIe HW.
> If found in the DT node, use it.
>
> Signed-off-by: Jim Quinlan <james.quinlan@xxxxxxxxxxxx>
> ---
> drivers/pci/controller/pcie-brcmstb.c | 19 +++++++++++++++++++
> 1 file changed, 19 insertions(+)
>
> diff --git a/drivers/pci/controller/pcie-brcmstb.c b/drivers/pci/controller/pcie-brcmstb.c
> index 4104c3668fdb..69926ee5c961 100644
> --- a/drivers/pci/controller/pcie-brcmstb.c
> +++ b/drivers/pci/controller/pcie-brcmstb.c
> @@ -266,6 +266,7 @@ struct brcm_pcie {
> struct reset_control *rescal;
> struct reset_control *perst_reset;
> struct reset_control *bridge;
> + struct reset_control *swinit;
> int num_memc;
> u64 memc_size[PCIE_BRCM_MAX_MEMC];
> u32 hw_rev;
> @@ -1626,6 +1627,13 @@ static int brcm_pcie_probe(struct platform_device *pdev)
> dev_err(&pdev->dev, "could not enable clock\n");
> return ret;
> }
> +
> + pcie->swinit = devm_reset_control_get_optional_exclusive(&pdev->dev, "swinit");
> + if (IS_ERR(pcie->swinit)) {
> + ret = dev_err_probe(&pdev->dev, PTR_ERR(pcie->swinit),
> + "failed to get 'swinit' reset\n");
> + goto clk_out;
> + }
> pcie->rescal = devm_reset_control_get_optional_shared(&pdev->dev, "rescal");
> if (IS_ERR(pcie->rescal)) {
> ret = PTR_ERR(pcie->rescal);
> @@ -1637,6 +1645,17 @@ static int brcm_pcie_probe(struct platform_device *pdev)
> goto clk_out;
> }
>
> + ret = reset_control_assert(pcie->swinit);
> + if (ret) {
> + dev_err_probe(&pdev->dev, ret, "could not assert reset 'swinit'\n");
> + goto clk_out;
> + }
> + ret = reset_control_deassert(pcie->swinit);
> + if (ret) {
> + dev_err(&pdev->dev, "could not de-assert reset 'swinit' after asserting\n");
> + goto clk_out;
> + }
why not call reset_control_reset(pcie->swinit) directly?
~Stan
> +
> ret = reset_control_reset(pcie->rescal);
> if (ret) {
> dev_err(&pdev->dev, "failed to deassert 'rescal'\n");
