Re: [PATCH v4 RESEND 0/8] ipq9574: Enable PCI-Express support

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 





On 5/1/2024 9:58 AM, Alexandru Gagniuc wrote:
There are four PCIe ports on IPQ9574, pcie0 thru pcie3. This series
addresses pcie2, which is a gen3x2 port. The board I have only uses
pcie2, and that's the only one enabled in this series. pcie3 is added
as a special request, but is untested.

I believe this makes sense as a monolithic series, as the individual
pieces are not that useful by themselves.

Hi Alexandru,

As Dmitry suggested, we are working on enabling the PCIe NOC clocks
via Interconnect. We will be posting the PCIe series with
Interconnect support [1] shortly.

[1] - https://lore.kernel.org/linux-arm-msm/20240430064214.2030013-1-quic_varada@xxxxxxxxxxx/

Thanks,
S.Devi Priya

In v2, I've had some issues regarding the dt schema checks. For
transparency, I used the following test invocations to test:

       make dt_binding_check     DT_SCHEMA_FILES=qcom,pcie.yaml:qcom,ipq8074-qmp-pcie-phy.yaml
       make dtbs_check           DT_SCHEMA_FILES=qcom,pcie.yaml:qcom,ipq8074-qmp-pcie-phy.yaml

Changes since v3:
  - "const"ify .hw.init fields for the PCIE pipe clocks
  - Used pciephy_v5_regs_layout instead of v4 in phy-qcom-qmp-pcie.c
  - Included Manivannan's patch for qcom-pcie.c clocks
  - Dropped redundant comments in "ranges" and "interrupt-map" of pcie2.
  - Added pcie3 and pcie3_phy dts nodes
  - Moved snoc and anoc clocks to PCIe controller from PHY

Changes since v2:
  - reworked resets in qcom,pcie.yaml to resolve dt schema errors
  - constrained "reg" in qcom,pcie.yaml
  - reworked min/max intems in qcom,ipq8074-qmp-pcie-phy.yaml
  - dropped msi-parent for pcie node, as it is handled by "msi" IRQ

Changes since v1:
  - updated new tables in phy-qcom-qmp-pcie.c to use lowercase hex numbers
  - reorganized qcom,ipq8074-qmp-pcie-phy.yaml to use a single list of clocks
  - reorganized qcom,pcie.yaml to include clocks+resets per compatible
  - Renamed "pcie2_qmp_phy" label to "pcie2_phy"
  - moved "ranges" property of pcie@20000000 higher up

Alexandru Gagniuc (7):
   dt-bindings: clock: Add PCIe pipe related clocks for IPQ9574
   clk: qcom: gcc-ipq9574: Add PCIe pipe clocks
   dt-bindings: PCI: qcom: Add IPQ9574 PCIe controller
   PCI: qcom: Add support for IPQ9574
   dt-bindings: phy: qcom,ipq8074-qmp-pcie: add ipq9574 gen3x2 PHY
   phy: qcom-qmp-pcie: add support for ipq9574 gen3x2 PHY
   arm64: dts: qcom: ipq9574: add PCIe2 and PCIe3 nodes

Manivannan Sadhasivam (1):
   PCI: qcom: Switch to devm_clk_bulk_get_all() API to get the clocks
     from Devicetree

  .../devicetree/bindings/pci/qcom,pcie.yaml    |  37 ++++
  .../phy/qcom,ipq8074-qmp-pcie-phy.yaml        |   1 +
  arch/arm64/boot/dts/qcom/ipq9574.dtsi         | 178 +++++++++++++++++-
  drivers/clk/qcom/gcc-ipq9574.c                |  76 ++++++++
  drivers/pci/controller/dwc/pcie-qcom.c        | 164 +++-------------
  drivers/phy/qualcomm/phy-qcom-qmp-pcie.c      | 136 ++++++++++++-
  .../phy/qualcomm/phy-qcom-qmp-pcs-pcie-v5.h   |  14 ++
  include/dt-bindings/clock/qcom,ipq9574-gcc.h  |   4 +
  8 files changed, 469 insertions(+), 141 deletions(-)





[Index of Archives]     [DMA Engine]     [Linux Coverity]     [Linux USB]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Greybus]

  Powered by Linux