On Fri, Feb 16, 2024 at 02:24:14PM +0800, Jian-Hong Pan wrote: > The remapped PCIe Root Port and NVMe have PCI PM L1 substates capability, > but they are disabled originally. AFAIK there's nothing specific to NVMe here, so I think the subject and commit log should be more generic. I think the important piece of this is to make sure the device is in D0 before configuring L1 substates, so that should be the primary motivation. And "D0" should be part of the subject line, because vmd_pm_enable_quirk() already *has* code to enable all ASPM states; it just doesn't work correctly. > Here is a failed example on ASUS B1400CEAE: > > Capabilities: [900 v1] L1 PM Substates > L1SubCap: PCI-PM_L1.2+ PCI-PM_L1.1- ASPM_L1.2+ ASPM_L1.1- L1_PM_Substates+ > PortCommonModeRestoreTime=32us PortTPowerOnTime=10us > L1SubCtl1: PCI-PM_L1.2- PCI-PM_L1.1- ASPM_L1.2+ ASPM_L1.1- > T_CommonMode=0us LTR1.2_Threshold=0ns > L1SubCtl2: T_PwrOn=10us > > Power on all of the VMD remapped PCI devices before enable PCI-PM L1 PM > Substates by following PCI Express Base Specification Revision 6.0, section > 5.5.4. "PCIe r6.0, sec 5.5.4", as you have in the comment, is enough. If you send future patches with a [0/n] cover letter and the patches as responses to the cover letter, "b4" will be able to grab them all easily: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/Documentation/process/5.Posting.rst?id=v6.7#n349 > Link: https://bugzilla.kernel.org/show_bug.cgi?id=218394 > Signed-off-by: Jian-Hong Pan <jhp@xxxxxxxxxxxxx> > --- > v2: > - Power on the VMD remapped devices with pci_set_power_state_locked() > - Prepare the PCIe LTR parameters before enable L1 Substates > - Add note into the comments of both pci_enable_link_state() and > pci_enable_link_state_locked() for kernel-doc. > - The original patch set can be split as individual patches. > > v3: > - Re-send for the missed version information. > - Split drivers/pci/pcie/aspm.c modification into following patches. > - Fix the comment for enasuring the PCI devices in D0. > > v4: > - The same > > drivers/pci/controller/vmd.c | 13 +++++++++---- > 1 file changed, 9 insertions(+), 4 deletions(-) > > diff --git a/drivers/pci/controller/vmd.c b/drivers/pci/controller/vmd.c > index 87b7856f375a..6aca3f77724c 100644 > --- a/drivers/pci/controller/vmd.c > +++ b/drivers/pci/controller/vmd.c > @@ -751,11 +751,9 @@ static int vmd_pm_enable_quirk(struct pci_dev *pdev, void *userdata) > if (!(features & VMD_FEAT_BIOS_PM_QUIRK)) > return 0; > > - pci_enable_link_state_locked(pdev, PCIE_LINK_STATE_ALL); > - > pos = pci_find_ext_capability(pdev, PCI_EXT_CAP_ID_LTR); > if (!pos) > - return 0; > + goto out_enable_link_state; > > /* > * Skip if the max snoop LTR is non-zero, indicating BIOS has set it > @@ -763,7 +761,7 @@ static int vmd_pm_enable_quirk(struct pci_dev *pdev, void *userdata) > */ > pci_read_config_dword(pdev, pos + PCI_LTR_MAX_SNOOP_LAT, <r_reg); > if (!!(ltr_reg & (PCI_LTR_VALUE_MASK | PCI_LTR_SCALE_MASK))) > - return 0; > + goto out_enable_link_state; > > /* > * Set the default values to the maximum required by the platform to > @@ -775,6 +773,13 @@ static int vmd_pm_enable_quirk(struct pci_dev *pdev, void *userdata) > pci_write_config_dword(pdev, pos + PCI_LTR_MAX_SNOOP_LAT, ltr_reg); > pci_info(pdev, "VMD: Default LTR value set by driver\n"); > > +out_enable_link_state: > + /* > + * Ensure devices are in D0 before enabling PCI-PM L1 PM Substates, per > + * PCIe r6.0, sec 5.5.4. > + */ > + pci_set_power_state_locked(pdev, PCI_D0); > + pci_enable_link_state_locked(pdev, PCIE_LINK_STATE_ALL); > return 0; > } > > -- > 2.43.2 >
