[PATCH v4 1/3] PCI: vmd: Enable PCI PM's L1 substates of remapped PCIe Root Port and NVMe

[Jian-Hong Pan <jhp@xxxxxxxxxxxxx>]

The remapped PCIe Root Port and NVMe have PCI PM L1 substates capability,
but they are disabled originally.

Here is a failed example on ASUS B1400CEAE:

Capabilities: [900 v1] L1 PM Substates
        L1SubCap: PCI-PM_L1.2+ PCI-PM_L1.1- ASPM_L1.2+ ASPM_L1.1- L1_PM_Substates+
                  PortCommonModeRestoreTime=32us PortTPowerOnTime=10us
        L1SubCtl1: PCI-PM_L1.2- PCI-PM_L1.1- ASPM_L1.2+ ASPM_L1.1-
                   T_CommonMode=0us LTR1.2_Threshold=0ns
        L1SubCtl2: T_PwrOn=10us

Power on all of the VMD remapped PCI devices before enable PCI-PM L1 PM
Substates by following PCI Express Base Specification Revision 6.0, section
5.5.4.

Link: https://bugzilla.kernel.org/show_bug.cgi?id=218394
Signed-off-by: Jian-Hong Pan <jhp@xxxxxxxxxxxxx>
---
v2:
- Power on the VMD remapped devices with pci_set_power_state_locked()
- Prepare the PCIe LTR parameters before enable L1 Substates
- Add note into the comments of both pci_enable_link_state() and
  pci_enable_link_state_locked() for kernel-doc.
- The original patch set can be split as individual patches.

v3:
- Re-send for the missed version information.
- Split drivers/pci/pcie/aspm.c modification into following patches.
- Fix the comment for enasuring the PCI devices in D0.

v4:
- The same

 drivers/pci/controller/vmd.c | 13 +++++++++----
 1 file changed, 9 insertions(+), 4 deletions(-)

diff --git a/drivers/pci/controller/vmd.c b/drivers/pci/controller/vmd.c
index 87b7856f375a..6aca3f77724c 100644
--- a/drivers/pci/controller/vmd.c
+++ b/drivers/pci/controller/vmd.c
@@ -751,11 +751,9 @@ static int vmd_pm_enable_quirk(struct pci_dev *pdev, void *userdata)
 	if (!(features & VMD_FEAT_BIOS_PM_QUIRK))
 		return 0;
 
-	pci_enable_link_state_locked(pdev, PCIE_LINK_STATE_ALL);
-
 	pos = pci_find_ext_capability(pdev, PCI_EXT_CAP_ID_LTR);
 	if (!pos)
-		return 0;
+		goto out_enable_link_state;
 
 	/*
 	 * Skip if the max snoop LTR is non-zero, indicating BIOS has set it
@@ -763,7 +761,7 @@ static int vmd_pm_enable_quirk(struct pci_dev *pdev, void *userdata)
 	 */
 	pci_read_config_dword(pdev, pos + PCI_LTR_MAX_SNOOP_LAT, &ltr_reg);
 	if (!!(ltr_reg & (PCI_LTR_VALUE_MASK | PCI_LTR_SCALE_MASK)))
-		return 0;
+		goto out_enable_link_state;
 
 	/*
 	 * Set the default values to the maximum required by the platform to
@@ -775,6 +773,13 @@ static int vmd_pm_enable_quirk(struct pci_dev *pdev, void *userdata)
 	pci_write_config_dword(pdev, pos + PCI_LTR_MAX_SNOOP_LAT, ltr_reg);
 	pci_info(pdev, "VMD: Default LTR value set by driver\n");
 
+out_enable_link_state:
+	/*
+	 * Ensure devices are in D0 before enabling PCI-PM L1 PM Substates, per
+	 * PCIe r6.0, sec 5.5.4.
+	 */
+	pci_set_power_state_locked(pdev, PCI_D0);
+	pci_enable_link_state_locked(pdev, PCIE_LINK_STATE_ALL);
 	return 0;
 }
 
-- 
2.43.2