On Mon, Feb 26, 2024 at 06:05:16PM +0100, Thomas Richard wrote:
> On 2/15/24 17:04, Andy Shevchenko wrote:
> > On Thu, Feb 15, 2024 at 04:18:02PM +0100, Thomas Richard wrote:
> >> From: Théo Lebrun <theo.lebrun@xxxxxxxxxxx>
...
> >> case PCI_MODE_RC:
> >> - gpiod = devm_gpiod_get_optional(dev, "reset", GPIOD_OUT_LOW);
> >> - if (IS_ERR(gpiod)) {
> >> - ret = PTR_ERR(gpiod);
> >> + pcie->reset_gpio = devm_gpiod_get_optional(dev, "reset", GPIOD_OUT_LOW);
> >> + if (IS_ERR(pcie->reset_gpio)) {
> >> + ret = PTR_ERR(pcie->reset_gpio);
> >> if (ret != -EPROBE_DEFER)
> >> dev_err(dev, "Failed to get reset GPIO\n");
> >> goto err_get_sync;
> >> @@ -504,9 +504,9 @@ static int j721e_pcie_probe(struct platform_device *pdev)
> >> * mode is selected while enabling the PHY. So deassert PERST#
> >> * after 100 us.
> >> */
> >> - if (gpiod) {
> >> + if (pcie->reset_gpio) {
> >> usleep_range(100, 200);
> >> - gpiod_set_value_cansleep(gpiod, 1);
> >> + gpiod_set_value_cansleep(pcie->reset_gpio, 1);
> >> }
> >
> > Instead of all this, just add one line assignment. Moreover, before or after
> > this patch refactor the code to use ret = dev_err_probe(...); pattern that
> > eliminates those deferral probe checks.
>
> Hi Andy,
>
> I'm not sure what you exactly want when you write "just add one line
> assignment".
pcie->reset_gpio = gpiod;
That's it. No additional code changes are needed (WRT the above context,
of course you want to have a new structure member).
--
With Best Regards,
Andy Shevchenko
