On 2/15/24 17:04, Andy Shevchenko wrote:
> On Thu, Feb 15, 2024 at 04:18:02PM +0100, Thomas Richard wrote:
>> From: Théo Lebrun <theo.lebrun@xxxxxxxxxxx>
>>
>> Add reset GPIO to struct j721e_pcie, so it can be used at suspend and
>> resume stages.
>
> ...
>
>> case PCI_MODE_RC:
>> - gpiod = devm_gpiod_get_optional(dev, "reset", GPIOD_OUT_LOW);
>> - if (IS_ERR(gpiod)) {
>> - ret = PTR_ERR(gpiod);
>> + pcie->reset_gpio = devm_gpiod_get_optional(dev, "reset", GPIOD_OUT_LOW);
>> + if (IS_ERR(pcie->reset_gpio)) {
>> + ret = PTR_ERR(pcie->reset_gpio);
>> if (ret != -EPROBE_DEFER)
>> dev_err(dev, "Failed to get reset GPIO\n");
>> goto err_get_sync;
>> @@ -504,9 +504,9 @@ static int j721e_pcie_probe(struct platform_device *pdev)
>> * mode is selected while enabling the PHY. So deassert PERST#
>> * after 100 us.
>> */
>> - if (gpiod) {
>> + if (pcie->reset_gpio) {
>> usleep_range(100, 200);
>> - gpiod_set_value_cansleep(gpiod, 1);
>> + gpiod_set_value_cansleep(pcie->reset_gpio, 1);
>> }
>
> Instead of all this, just add one line assignment. Moreover, before or after
> this patch refactor the code to use ret = dev_err_probe(...); pattern that
> eliminates those deferral probe checks.
Hi Andy,
I'm not sure what you exactly want when you write "just add one line
assignment".
For the dev_err_probe() it's okay, it will be fixed in the next iteration.
Regards,
--
Thomas Richard, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com
