Since some i.MX platforms make use of the separate PHY driver, use
IMX6_PCIE_FLAG_HAS_PHYDRV flag to identify them and get the reference to
PHY from DT. This simplifies the code.
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
Signed-off-by: Frank Li <Frank.Li@xxxxxxx>
---
Notes:
Change from v8 to v9:
- change commit message according Manivannan's suggestion
- Add Manivannan's review tag
Change from v7 to v8:
- renmae IMX6_PCIE_FLAG_HAS_PHY to IMX6_PCIE_FLAG_HAS_PHYDRV
Change from v6 to v7:
- none
Change from v4 to v5:
- none, Keep IMX6_PCIE_FLAG_HAS_PHY to indicate dts mismatch when platform
require phy suppport.
Change from v1 to v3:
- none
drivers/pci/controller/dwc/pci-imx6.c | 24 +++++++++++++++++-------
1 file changed, 17 insertions(+), 7 deletions(-)
diff --git a/drivers/pci/controller/dwc/pci-imx6.c b/drivers/pci/controller/dwc/pci-imx6.c
index 82854e94c5621..59f117f855c26 100644
--- a/drivers/pci/controller/dwc/pci-imx6.c
+++ b/drivers/pci/controller/dwc/pci-imx6.c
@@ -60,6 +60,9 @@ enum imx6_pcie_variants {
#define IMX6_PCIE_FLAG_IMX6_PHY BIT(0)
#define IMX6_PCIE_FLAG_IMX6_SPEED_CHANGE BIT(1)
#define IMX6_PCIE_FLAG_SUPPORTS_SUSPEND BIT(2)
+#define IMX6_PCIE_FLAG_HAS_PHYDRV BIT(3)
+
+#define imx6_check_flag(pci, val) (pci->drvdata->flags & val)
#define IMX6_PCIE_MAX_CLKS 6
@@ -1277,6 +1280,13 @@ static int imx6_pcie_probe(struct platform_device *pdev)
if (ret)
return ret;
+ if (imx6_check_flag(imx6_pcie, IMX6_PCIE_FLAG_HAS_PHYDRV)) {
+ imx6_pcie->phy = devm_phy_get(dev, "pcie-phy");
+ if (IS_ERR(imx6_pcie->phy))
+ return dev_err_probe(dev, PTR_ERR(imx6_pcie->phy),
+ "failed to get pcie phy\n");
+ }
+
switch (imx6_pcie->drvdata->variant) {
case IMX8MQ:
case IMX8MQ_EP:
@@ -1308,11 +1318,6 @@ static int imx6_pcie_probe(struct platform_device *pdev)
return dev_err_probe(dev, PTR_ERR(imx6_pcie->apps_reset),
"failed to get pcie apps reset control\n");
- imx6_pcie->phy = devm_phy_get(dev, "pcie-phy");
- if (IS_ERR(imx6_pcie->phy))
- return dev_err_probe(dev, PTR_ERR(imx6_pcie->phy),
- "failed to get pcie phy\n");
-
break;
default:
break;
@@ -1456,14 +1461,17 @@ static const struct imx6_pcie_drvdata drvdata[] = {
},
[IMX8MM] = {
.variant = IMX8MM,
- .flags = IMX6_PCIE_FLAG_SUPPORTS_SUSPEND,
+ .flags = IMX6_PCIE_FLAG_SUPPORTS_SUSPEND |
+ IMX6_PCIE_FLAG_HAS_PHYDRV |
+ IMX6_PCIE_FLAG_HAS_APP_RESET,
.gpr = "fsl,imx8mm-iomuxc-gpr",
.clk_names = imx8mm_clks,
.clks_cnt = ARRAY_SIZE(imx8mm_clks),
},
[IMX8MP] = {
.variant = IMX8MP,
- .flags = IMX6_PCIE_FLAG_SUPPORTS_SUSPEND,
+ .flags = IMX6_PCIE_FLAG_SUPPORTS_SUSPEND |
+ IMX6_PCIE_FLAG_HAS_PHYDRV,
.gpr = "fsl,imx8mp-iomuxc-gpr",
.clk_names = imx8mm_clks,
.clks_cnt = ARRAY_SIZE(imx8mm_clks),
@@ -1477,6 +1485,7 @@ static const struct imx6_pcie_drvdata drvdata[] = {
},
[IMX8MM_EP] = {
.variant = IMX8MM_EP,
+ .flags = IMX6_PCIE_FLAG_HAS_PHYDRV,
.mode = DW_PCIE_EP_TYPE,
.gpr = "fsl,imx8mm-iomuxc-gpr",
.clk_names = imx8mm_clks,
@@ -1484,6 +1493,7 @@ static const struct imx6_pcie_drvdata drvdata[] = {
},
[IMX8MP_EP] = {
.variant = IMX8MP_EP,
+ .flags = IMX6_PCIE_FLAG_HAS_PHYDRV,
.mode = DW_PCIE_EP_TYPE,
.gpr = "fsl,imx8mp-iomuxc-gpr",
.clk_names = imx8mm_clks,
--
2.34.1
