Avoid use get slot id by compared with register physical address. If there
are more than 2 slots, compared logic will become complex.
"linux,pci-domain" already exist at dts since commit:
commit (c0b70f05c87f3b arm64: dts: imx8mq: use_dt_domains for pci node).
So it is safe to remove compare basic address code:
...
if (dbi_base->start == IMX8MQ_PCIE2_BASE_ADDR)
imx6_pcie->controller_id = 1;
...
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
Signed-off-by: Frank Li <Frank.Li@xxxxxxx>
---
Notes:
Change from v7 to v8
- fixed comments
- Added Manivannan Sadhasivam's review tag
Change from v5 to v7
- none
Change from v3 to v4
- remove compare basic address logic
Change from v2 to v3
- none
Change from v1 to v2
- fix of_get_pci_domain_nr return value check logic
drivers/pci/controller/dwc/pci-imx6.c | 20 ++++++++++++--------
1 file changed, 12 insertions(+), 8 deletions(-)
diff --git a/drivers/pci/controller/dwc/pci-imx6.c b/drivers/pci/controller/dwc/pci-imx6.c
index eda6bc6ef80ee..773411d20329f 100644
--- a/drivers/pci/controller/dwc/pci-imx6.c
+++ b/drivers/pci/controller/dwc/pci-imx6.c
@@ -33,6 +33,7 @@
#include <linux/pm_domain.h>
#include <linux/pm_runtime.h>
+#include "../../pci.h"
#include "pcie-designware.h"
#define IMX8MQ_GPR_PCIE_REF_USE_PAD BIT(9)
@@ -40,7 +41,6 @@
#define IMX8MQ_GPR_PCIE_CLK_REQ_OVERRIDE BIT(11)
#define IMX8MQ_GPR_PCIE_VREG_BYPASS BIT(12)
#define IMX8MQ_GPR12_PCIE2_CTRL_DEVICE_TYPE GENMASK(11, 8)
-#define IMX8MQ_PCIE2_BASE_ADDR 0x33c00000
#define to_imx6_pcie(x) dev_get_drvdata((x)->dev)
@@ -1279,13 +1279,17 @@ static int imx6_pcie_probe(struct platform_device *pdev)
"Failed to get PCIEPHY reset control\n");
}
- switch (imx6_pcie->drvdata->variant) {
- case IMX7D:
- if (dbi_base->start == IMX8MQ_PCIE2_BASE_ADDR)
- imx6_pcie->controller_id = 1;
- default:
- break;
- }
+ /* Using linux,pci-domain as PCI slot id */
+ imx6_pcie->controller_id = of_get_pci_domain_nr(node);
+ /*
+ * If there are no "linux,pci-domain" property specified in DT, then assume only one
+ * controller is available.
+ */
+ if (imx6_pcie->controller_id == -EINVAL)
+ imx6_pcie->controller_id = 0;
+ else if (imx6_pcie->controller_id < 0)
+ return dev_err_probe(dev, imx6_pcie->controller_id,
+ "linux,pci-domain have wrong value\n");
/* Grab turnoff reset */
imx6_pcie->turnoff_reset = devm_reset_control_get_optional_exclusive(dev, "turnoff");
--
2.34.1
