iMX8MQ have two pci controllers. Adds "linux,pci-domain" as required
property for iMX8MQ to indicate pci controller index.
This adjustment paves the way for eliminating the hardcoded check on the
base register for acquiring the controller_id.
...
if (dbi_base->start == IMX8MQ_PCIE2_BASE_ADDR)
imx6_pcie->controller_id = 1;
...
The controller_id is crucial and utilized for certain register bit
positions. It must align precisely with the controller index in the SoC.
An auto-incremented ID don't fit this case. The DTS or fuse configurations
may deactivate specific PCI controllers.
Reviewed-by: Rob Herring <robh@xxxxxxxxxx>
Signed-off-by: Frank Li <Frank.Li@xxxxxxx>
---
Notes:
Change from v8 to v9
- Add rob's review tag
Change from v6 to v8
-none
Change from v5 to v6
- rework commit message to explain why need required and why auto increase
id not work
Change from v4 to v5
- new patch at v5
.../bindings/pci/fsl,imx6q-pcie-common.yaml | 11 +++++++++++
1 file changed, 11 insertions(+)
diff --git a/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie-common.yaml b/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie-common.yaml
index d91b639ae7ae7..8f39b4e6e8491 100644
--- a/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie-common.yaml
+++ b/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie-common.yaml
@@ -265,6 +265,17 @@ allOf:
- const: apps
- const: turnoff
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - fsl,imx8mq-pcie
+ - fsl,imx8mq-pcie-ep
+ then:
+ required:
+ - linux,pci-domain
+
additionalProperties: true
...
--
2.34.1
