Re: [RFC PATCH v10 2/5] iommu/vt-d: break out ATS Invalidation if target device is gone

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




On 1/10/2024 1:17 PM, Baolu Lu wrote:
On 12/29/23 1:02 AM, Ethan Zhao wrote:
For those endpoint devices connect to system via hotplug capable ports,
users could request a warm reset to the device by flapping device's link
through setting the slot's link control register, as pciehp_ist() DLLSC
interrupt sequence response, pciehp will unload the device driver and
then power it off. thus cause an IOMMU device-TLB invalidation (Intel
VT-d spec, or ATS Invalidation in PCIe spec r6.1) request for device to
be sent and a long time completion/timeout waiting in interrupt context.

That would cause following continuous hard lockup warning and system hang

[ 4211.433662] pcieport 0000:17:01.0: pciehp: Slot(108): Link Down
[ 4211.433664] pcieport 0000:17:01.0: pciehp: Slot(108): Card not present
[ 4223.822591] NMI watchdog: Watchdog detected hard LOCKUP on cpu 144
[ 4223.822622] CPU: 144 PID: 1422 Comm: irq/57-pciehp Kdump: loaded Tainted: G S
          OE    kernel version xxxx
[ 4223.822623] Hardware name: vendorname xxxx 666-106,
BIOS 01.01.02.03.01 05/15/2023
[ 4223.822623] RIP: 0010:qi_submit_sync+0x2c0/0x490
[ 4223.822624] Code: 48 be 00 00 00 00 00 08 00 00 49 85 74 24 20 0f 95 c1 48 8b   57 10 83 c1 04 83 3c 1a 03 0f 84 a2 01 00 00 49 8b 04 24 8b 70 34 <40> f6 c6 1
0 74 17 49 8b 04 24 8b 80 80 00 00 00 89 c2 d3 fa 41 39
[ 4223.822624] RSP: 0018:ffffc4f074f0bbb8 EFLAGS: 00000093
[ 4223.822625] RAX: ffffc4f040059000 RBX: 0000000000000014 RCX: 0000000000000005 [ 4223.822625] RDX: ffff9f3841315800 RSI: 0000000000000000 RDI: ffff9f38401a8340 [ 4223.822625] RBP: ffff9f38401a8340 R08: ffffc4f074f0bc00 R09: 0000000000000000 [ 4223.822626] R10: 0000000000000010 R11: 0000000000000018 R12: ffff9f384005e200 [ 4223.822626] R13: 0000000000000004 R14: 0000000000000046 R15: 0000000000000004
[ 4223.822626] FS:  0000000000000000(0000) GS:ffffa237ae400000(0000)
knlGS:0000000000000000
[ 4223.822627] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 4223.822627] CR2: 00007ffe86515d80 CR3: 000002fd3000a001 CR4: 0000000000770ee0 [ 4223.822627] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 4223.822628] DR3: 0000000000000000 DR6: 00000000fffe07f0 DR7: 0000000000000400
[ 4223.822628] PKRU: 55555554
[ 4223.822628] Call Trace:
[ 4223.822628]  qi_flush_dev_iotlb+0xb1/0xd0
[ 4223.822628]  __dmar_remove_one_dev_info+0x224/0x250
[ 4223.822629]  dmar_remove_one_dev_info+0x3e/0x50
[ 4223.822629]  intel_iommu_release_device+0x1f/0x30
[ 4223.822629]  iommu_release_device+0x33/0x60
[ 4223.822629]  iommu_bus_notifier+0x7f/0x90
[ 4223.822630]  blocking_notifier_call_chain+0x60/0x90
[ 4223.822630]  device_del+0x2e5/0x420
[ 4223.822630]  pci_remove_bus_device+0x70/0x110
[ 4223.822630]  pciehp_unconfigure_device+0x7c/0x130
[ 4223.822631]  pciehp_disable_slot+0x6b/0x100
[ 4223.822631]  pciehp_handle_presence_or_link_change+0xd8/0x320
[ 4223.822631]  pciehp_ist+0x176/0x180
[ 4223.822631]  ? irq_finalize_oneshot.part.50+0x110/0x110
[ 4223.822632]  irq_thread_fn+0x19/0x50
[ 4223.822632]  irq_thread+0x104/0x190
[ 4223.822632]  ? irq_forced_thread_fn+0x90/0x90
[ 4223.822632]  ? irq_thread_check_affinity+0xe0/0xe0
[ 4223.822633]  kthread+0x114/0x130
[ 4223.822633]  ? __kthread_cancel_work+0x40/0x40
[ 4223.822633]  ret_from_fork+0x1f/0x30
[ 4223.822633] Kernel panic - not syncing: Hard LOCKUP
[ 4223.822634] CPU: 144 PID: 1422 Comm: irq/57-pciehp Kdump: loaded Tainted: G S
          OE     kernel version xxxx
[ 4223.822634] Hardware name: vendorname xxxx 666-106,
BIOS 01.01.02.03.01 05/15/2023
[ 4223.822634] Call Trace:
[ 4223.822634]  <NMI>
[ 4223.822635]  dump_stack+0x6d/0x88
[ 4223.822635]  panic+0x101/0x2d0
[ 4223.822635]  ? ret_from_fork+0x11/0x30
[ 4223.822635]  nmi_panic.cold.14+0xc/0xc
[ 4223.822636]  watchdog_overflow_callback.cold.8+0x6d/0x81
[ 4223.822636]  __perf_event_overflow+0x4f/0xf0
[ 4223.822636]  handle_pmi_common+0x1ef/0x290
[ 4223.822636]  ? __set_pte_vaddr+0x28/0x40
[ 4223.822637]  ? flush_tlb_one_kernel+0xa/0x20
[ 4223.822637]  ? __native_set_fixmap+0x24/0x30
[ 4223.822637]  ? ghes_copy_tofrom_phys+0x70/0x100
[ 4223.822637]  ? __ghes_peek_estatus.isra.16+0x49/0xa0
[ 4223.822637]  intel_pmu_handle_irq+0xba/0x2b0
[ 4223.822638]  perf_event_nmi_handler+0x24/0x40
[ 4223.822638]  nmi_handle+0x4d/0xf0
[ 4223.822638]  default_do_nmi+0x49/0x100
[ 4223.822638]  exc_nmi+0x134/0x180
[ 4223.822639]  end_repeat_nmi+0x16/0x67
[ 4223.822639] RIP: 0010:qi_submit_sync+0x2c0/0x490
[ 4223.822639] Code: 48 be 00 00 00 00 00 08 00 00 49 85 74 24 20 0f 95 c1 48 8b   57 10 83 c1 04 83 3c 1a 03 0f 84 a2 01 00 00 49 8b 04 24 8b 70 34 <40> f6 c6 10
  74 17 49 8b 04 24 8b 80 80 00 00 00 89 c2 d3 fa 41 39
[ 4223.822640] RSP: 0018:ffffc4f074f0bbb8 EFLAGS: 00000093
[ 4223.822640] RAX: ffffc4f040059000 RBX: 0000000000000014 RCX: 0000000000000005 [ 4223.822640] RDX: ffff9f3841315800 RSI: 0000000000000000 RDI: ffff9f38401a8340 [ 4223.822641] RBP: ffff9f38401a8340 R08: ffffc4f074f0bc00 R09: 0000000000000000 [ 4223.822641] R10: 0000000000000010 R11: 0000000000000018 R12: ffff9f384005e200 [ 4223.822641] R13: 0000000000000004 R14: 0000000000000046 R15: 0000000000000004
[ 4223.822641]  ? qi_submit_sync+0x2c0/0x490
[ 4223.822642]  ? qi_submit_sync+0x2c0/0x490
[ 4223.822642]  </NMI>
[ 4223.822642]  qi_flush_dev_iotlb+0xb1/0xd0
[ 4223.822642]  __dmar_remove_one_dev_info+0x224/0x250
[ 4223.822643]  dmar_remove_one_dev_info+0x3e/0x50
[ 4223.822643]  intel_iommu_release_device+0x1f/0x30
[ 4223.822643]  iommu_release_device+0x33/0x60
[ 4223.822643]  iommu_bus_notifier+0x7f/0x90
[ 4223.822644]  blocking_notifier_call_chain+0x60/0x90
[ 4223.822644]  device_del+0x2e5/0x420
[ 4223.822644]  pci_remove_bus_device+0x70/0x110
[ 4223.822644]  pciehp_unconfigure_device+0x7c/0x130
[ 4223.822644]  pciehp_disable_slot+0x6b/0x100
[ 4223.822645]  pciehp_handle_presence_or_link_change+0xd8/0x320
[ 4223.822645]  pciehp_ist+0x176/0x180
[ 4223.822645]  ? irq_finalize_oneshot.part.50+0x110/0x110
[ 4223.822645]  irq_thread_fn+0x19/0x50
[ 4223.822646]  irq_thread+0x104/0x190
[ 4223.822646]  ? irq_forced_thread_fn+0x90/0x90
[ 4223.822646]  ? irq_thread_check_affinity+0xe0/0xe0
[ 4223.822646]  kthread+0x114/0x130
[ 4223.822647]  ? __kthread_cancel_work+0x40/0x40
[ 4223.822647]  ret_from_fork+0x1f/0x30
[ 4223.822647] Kernel Offset: 0x6400000 from 0xffffffff81000000 (relocation
range: 0xffffffff80000000-0xffffffffbfffffff)

Furthermore even an in-process safe removal unplugged device could be
surprise removed anytime, thus need to check the ATS Invalidation target
device state to see if it is gone, and don't wait for the completion/
timeout blindly, thus avoid the up to 1min+50% (see Implementation Note
in PCIe spec r6.1 sec 10.3.1) waiting and cause hard lockup or system
hang.

Signed-off-by: Ethan Zhao <haifeng.zhao@xxxxxxxxxxxxxxx>
---
  drivers/iommu/intel/dmar.c | 8 ++++++++
  1 file changed, 8 insertions(+)

diff --git a/drivers/iommu/intel/dmar.c b/drivers/iommu/intel/dmar.c
index 3d661f2b7946..0a8d628a42ee 100644
--- a/drivers/iommu/intel/dmar.c
+++ b/drivers/iommu/intel/dmar.c
@@ -1423,6 +1423,14 @@ int qi_submit_sync(struct intel_iommu *iommu, struct qi_desc *desc,
      writel(qi->free_head << shift, iommu->reg + DMAR_IQT_REG);
        while (qi->desc_status[wait_index] != QI_DONE) {
+        /*
+         * if the device-TLB invalidation target device is gone, don't
+         * wait anymore, it might take up to 1min+50%, causes system
+         * hang. (see Implementation Note in PCIe spec r6.1 sec 10.3.1)
+         */
+        if ((type == QI_DIOTLB_TYPE || type == QI_DEIOTLB_TYPE) && pdev)
+            if (!pci_device_is_present(pdev))
+                    break;
          /*
           * We will leave the interrupts disabled, to prevent interrupt
           * context to queue another cmd while a cmd is already submitted

How about handing this in qi_check_fault() when it detects an ITE error?

fold into qi_check_fault() looks reasonable, no response from endpoint

device is a kind of fault. my concern there is no real ITE there (it didn't

wait for enough time), but it predicts there would be a timeout, that

is weird if we describe the fact, -ENOTCONN would be more precise

(device is not conneted)  well -ETIMEDOUT could simplify the caller error

handling, the side effect is we have to add pdev parameter to qi_check_fault()

too. then no need to check invalidition type of QI_IOTLB_TYPE &

QI_EIOTLB_TYPE in qi_check_fault() ? , seems we could save another

patch then, I am still not be convinced :), on the wall, not incline

to which side.

pros

- qi_submit_sync() could be simpler in error handling.

- qi_check_fault() does the right thing it should do.

- save another patch to break the loop.

cons

- more parameters to qi_check_fault()

- lost one opportunity to break loop while retry, but will bail out in next try.



Thanks,

Ethan


qi_check_fault() should returns -ETIMEDOUT instead of -EAGAIN, if

- qi_submit_sync() is called for a device TLB invalidation request
  (indicated by pdev is valid);
- device is not present.

Best regards,
baolu




[Index of Archives]     [DMA Engine]     [Linux Coverity]     [Linux USB]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Greybus]

  Powered by Linux