This mostly reverts b4c7d2076b4e ("PCI/LINK: Remove bandwidth
notification") and builds PCIe bandwidth controller on top of it.
The PCIe bandwidth notification were first added in the commit
e8303bb7a75c ("PCI/LINK: Report degraded links via link bandwidth
notification") but later had to be removed. The significant changes
compared with the old bandwidth notification driver include:
1) Don't print the notifications into kernel log, just keep the Link
Speed cached into the struct pci_bus updated. While somewhat
unfortunate, the log spam was the source of complaints that
eventually lead to the removal of the bandwidth notifications driver
(see the links below for further information).
2) Besides the Link Bandwidth Management Interrupt, enable also Link
Autonomous Bandwidth Interrupt to cover the other source of
bandwidth changes.
3) Use threaded IRQ with IRQF_ONESHOT to handle Bandwidth Notification
Interrupts to address the problem fixed in the commit 3e82a7f9031f
("PCI/LINK: Supply IRQ handler so level-triggered IRQs are acked")).
4) Handle Link Speed updates robustly. Refresh the cached Link Speed
when enabling Bandwidth Notification Interrupts, and solve the race
between Link Speed read and LBMS/LABS update in
pcie_bandwidth_notification_irq_thread().
5) Use concurrency safe LNKCTL RMW operations.
6) The driver is now called PCIe bwctrl (bandwidth controller) instead
of just bandwidth notifications because of increased scope and
functionality within the driver.
PCIe bandwidth controller introduces an in-kernel API to set PCIe Link
Speed. This new API is intended to be used in an upcoming commit that
adds a thermal cooling device to throttle PCIe bandwidth when thermal
thresholds are reached. No users are introduced in this commit yet.
The PCIe bandwidth control procedure is as follows. The highest speed
supported by the Port and the PCIe device which is not higher than the
requested speed is selected and written into the Target Link Speed in
the Link Control 2 Register. Then bandwidth controller retrains the
PCIe Link.
Bandwidth Notifications enable the cur_bus_speed in the struct pci_bus
to keep track PCIe Link Speed changes. While Bandwidth Notifications
should also be generated when bandwidth controller alters the PCIe Link
Speed, a few platforms do not deliver LMBS interrupt after Link
Training as expected. Thus, after changing the Link Speed, bandwidth
controller makes additional read for the Link Status Register to ensure
cur_bus_speed is consistent with the new PCIe Link Speed.
Link: https://lore.kernel.org/all/20190429185611.121751-1-helgaas@xxxxxxxxxx/
Link: https://lore.kernel.org/linux-pci/20190501142942.26972-1-keith.busch@xxxxxxxxx/
Link: https://lore.kernel.org/linux-pci/20200115221008.GA191037@xxxxxxxxxx/
Suggested-by: Lukas Wunner <lukas@xxxxxxxxx>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@xxxxxxxxxxxxxxx>
---
MAINTAINERS | 7 +
drivers/pci/pcie/Kconfig | 12 ++
drivers/pci/pcie/Makefile | 1 +
drivers/pci/pcie/bwctrl.c | 263 +++++++++++++++++++++++++++++++++++++
drivers/pci/pcie/portdrv.c | 9 +-
drivers/pci/pcie/portdrv.h | 10 +-
include/linux/pci-bwctrl.h | 17 +++
7 files changed, 313 insertions(+), 6 deletions(-)
create mode 100644 drivers/pci/pcie/bwctrl.c
create mode 100644 include/linux/pci-bwctrl.h
diff --git a/MAINTAINERS b/MAINTAINERS
index 97f51d5ec1cf..ccc5d50bf340 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -16766,6 +16766,13 @@ F: include/linux/pci*
F: include/uapi/linux/pci*
F: lib/pci*
+PCIE BANDWIDTH CONTROLLER
+M: Ilpo Järvinen <ilpo.jarvinen@xxxxxxxxxxxxxxx>
+L: linux-pci@xxxxxxxxxxxxxxx
+S: Supported
+F: drivers/pci/pcie/bwctrl.c
+F: include/linux/pci-bwctrl.h
+
PCIE DRIVER FOR AMAZON ANNAPURNA LABS
M: Jonathan Chocron <jonnyc@xxxxxxxxxx>
L: linux-pci@xxxxxxxxxxxxxxx
diff --git a/drivers/pci/pcie/Kconfig b/drivers/pci/pcie/Kconfig
index 8999fcebde6a..f1ef6030d2c2 100644
--- a/drivers/pci/pcie/Kconfig
+++ b/drivers/pci/pcie/Kconfig
@@ -146,6 +146,18 @@ config PCIE_PTM
This is only useful if you have devices that support PTM, but it
is safe to enable even if you don't.
+config PCIE_BW
+ bool "PCI Express Bandwidth Controller"
+ depends on PCIEPORTBUS
+ help
+ This enables PCI Express Bandwidth Controller. The Bandwidth
+ Controller allows controlling PCIe Link Speed and listens for Link
+ Bandwidth Change Notifications. The current Link Speed is available
+ through /sys/bus/pci/devices/.../current_link_speed.
+
+ If you know Link Width or Speed changes occur (e.g., to correct
+ unreliable links), you may answer Y.
+
config PCIE_EDR
bool "PCI Express Error Disconnect Recover support"
depends on PCIE_DPC && ACPI
diff --git a/drivers/pci/pcie/Makefile b/drivers/pci/pcie/Makefile
index 8de4ed5f98f1..175065a495cf 100644
--- a/drivers/pci/pcie/Makefile
+++ b/drivers/pci/pcie/Makefile
@@ -12,4 +12,5 @@ obj-$(CONFIG_PCIEAER_INJECT) += aer_inject.o
obj-$(CONFIG_PCIE_PME) += pme.o
obj-$(CONFIG_PCIE_DPC) += dpc.o
obj-$(CONFIG_PCIE_PTM) += ptm.o
+obj-$(CONFIG_PCIE_BW) += bwctrl.o
obj-$(CONFIG_PCIE_EDR) += edr.o
diff --git a/drivers/pci/pcie/bwctrl.c b/drivers/pci/pcie/bwctrl.c
new file mode 100644
index 000000000000..e17c98c25f06
--- /dev/null
+++ b/drivers/pci/pcie/bwctrl.c
@@ -0,0 +1,263 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * PCIe bandwidth controller
+ *
+ * Author: Alexandru Gagniuc <mr.nuke.me@xxxxxxxxx>
+ *
+ * Copyright (C) 2019 Dell Inc
+ * Copyright (C) 2023 Intel Corporation
+ *
+ * The PCIe bandwidth controller provides a way to alter PCIe Link Speeds
+ * and notify the operating system when the Link Width or Speed changes. The
+ * notification capability is required for all Root Ports and Downstream
+ * Ports supporting Link Width wider than x1 and/or multiple Link Speeds.
+ *
+ * This service port driver hooks into the Bandwidth Notification interrupt
+ * watching for changes or links becoming degraded in operation. It updates
+ * the cached Current Link Speed that is exposed to user space through sysfs.
+ */
+
+#define dev_fmt(fmt) "bwctrl: " fmt
+
+#include <linux/bitops.h>
+#include <linux/bits.h>
+#include <linux/device.h>
+#include <linux/errno.h>
+#include <linux/interrupt.h>
+#include <linux/mutex.h>
+#include <linux/pci.h>
+#include <linux/pci-bwctrl.h>
+#include <linux/types.h>
+
+#include "../pci.h"
+#include "portdrv.h"
+
+/**
+ * struct pcie_bwctrl_service_data - PCIe bandwidth controller
+ * @set_speed_mutex: serializes link speed changes
+ */
+struct pcie_bwctrl_service_data {
+ struct mutex set_speed_mutex;
+};
+
+static bool pcie_valid_speed(enum pci_bus_speed speed)
+{
+ return (speed >= PCIE_SPEED_2_5GT) && (speed <= PCIE_SPEED_64_0GT);
+}
+
+static u16 pci_bus_speed2lnkctl2(enum pci_bus_speed speed)
+{
+ static const u8 speed_conv[] = {
+ [PCIE_SPEED_2_5GT] = PCI_EXP_LNKCTL2_TLS_2_5GT,
+ [PCIE_SPEED_5_0GT] = PCI_EXP_LNKCTL2_TLS_5_0GT,
+ [PCIE_SPEED_8_0GT] = PCI_EXP_LNKCTL2_TLS_8_0GT,
+ [PCIE_SPEED_16_0GT] = PCI_EXP_LNKCTL2_TLS_16_0GT,
+ [PCIE_SPEED_32_0GT] = PCI_EXP_LNKCTL2_TLS_32_0GT,
+ [PCIE_SPEED_64_0GT] = PCI_EXP_LNKCTL2_TLS_64_0GT,
+ };
+
+ if (WARN_ON_ONCE(!pcie_valid_speed(speed)))
+ return 0;
+
+ return speed_conv[speed];
+}
+
+static inline u16 pcie_supported_speeds2target_speed(u8 supported_speeds)
+{
+ return __fls(supported_speeds);
+}
+
+static void pcie_bwnotif_enable(struct pci_dev *dev)
+{
+ u16 link_status;
+ int ret;
+
+ pcie_capability_set_word(dev, PCI_EXP_LNKCTL,
+ PCI_EXP_LNKCTL_LBMIE | PCI_EXP_LNKCTL_LABIE);
+ pcie_capability_write_word(dev, PCI_EXP_LNKSTA,
+ PCI_EXP_LNKSTA_LBMS | PCI_EXP_LNKSTA_LABS);
+
+ /* Read after enabling notifications to ensure link speed is up to date */
+ ret = pcie_capability_read_word(dev, PCI_EXP_LNKSTA, &link_status);
+ if (ret == PCIBIOS_SUCCESSFUL)
+ pcie_update_link_speed(dev->subordinate, link_status);
+}
+
+static void pcie_bwnotif_disable(struct pci_dev *dev)
+{
+ pcie_capability_clear_word(dev, PCI_EXP_LNKCTL,
+ PCI_EXP_LNKCTL_LBMIE | PCI_EXP_LNKCTL_LABIE);
+}
+
+static irqreturn_t pcie_bwnotif_irq_thread(int irq, void *context)
+{
+ struct pcie_device *srv = context;
+ struct pci_dev *port = srv->port;
+ u16 link_status, events;
+ int ret;
+
+ ret = pcie_capability_read_word(port, PCI_EXP_LNKSTA, &link_status);
+ events = link_status & (PCI_EXP_LNKSTA_LBMS | PCI_EXP_LNKSTA_LABS);
+
+ if (ret != PCIBIOS_SUCCESSFUL || !events)
+ return IRQ_NONE;
+
+ pcie_capability_write_word(port, PCI_EXP_LNKSTA, events);
+
+ /*
+ * The write to clear LBMS prevents getting interrupt from the
+ * latest link speed when the link speed changes between the above
+ * LNKSTA read and write. Therefore, re-read the speed before
+ * updating it.
+ */
+ ret = pcie_capability_read_word(port, PCI_EXP_LNKSTA, &link_status);
+ if (ret != PCIBIOS_SUCCESSFUL)
+ return IRQ_HANDLED;
+ pcie_update_link_speed(port->subordinate, link_status);
+
+ return IRQ_HANDLED;
+}
+
+/**
+ * pcie_bwctrl_select_speed - Select Target Link Speed
+ * @srv: PCIe Port
+ * @speed_req: requested PCIe Link Speed
+ *
+ * Select Target Link Speed by take into account Supported Link Speeds of
+ * both the Root Port and the Endpoint.
+ *
+ * Return: Target Link Speed (1=2.5GT/s, 2=5GT/s, 3=8GT/s, etc.)
+ */
+static u16 pcie_bwctrl_select_speed(struct pcie_device *srv, enum pci_bus_speed speed_req)
+{
+ struct pci_bus *bus = srv->port->subordinate;
+ u8 desired_speeds;
+
+ if (WARN_ON_ONCE(!bus->supported_speeds))
+ return PCI_EXP_LNKCAP2_SLS_2_5GB;
+
+ desired_speeds = GENMASK(pci_bus_speed2lnkctl2(speed_req),
+ __fls(PCI_EXP_LNKCAP2_SLS_2_5GB));
+
+ return pcie_supported_speeds2target_speed(bus->supported_speeds & desired_speeds);
+}
+
+/**
+ * pcie_bwctrl_set_current_speed - Set downstream Link Speed for PCIe Port
+ * @srv: PCIe Port
+ * @speed_req: requested PCIe Link Speed
+ *
+ * Attempts to set PCIe Port Link Speed to @speed_req. @speed_req may be
+ * adjusted downwards to the best speed supported by both the Port and PCIe
+ * Device underneath it.
+ *
+ * Return:
+ * * 0 - on success
+ * * -EINVAL - @speed_req is not a PCIe Link Speed
+ * * -ETIMEDOUT - changing Link Speed took too long
+ * * -EAGAIN - Link Speed was changed but @speed_req was not achieved
+ */
+int pcie_bwctrl_set_current_speed(struct pcie_device *srv, enum pci_bus_speed speed_req)
+{
+ struct pcie_bwctrl_service_data *data = get_service_data(srv);
+ struct pci_dev *port = srv->port;
+ u16 target_speed, link_status;
+ int ret;
+
+ if (WARN_ON_ONCE(!pcie_valid_speed(speed_req)))
+ return -EINVAL;
+
+ if (port->subordinate->cur_bus_speed == speed_req)
+ return 0;
+
+ target_speed = pcie_bwctrl_select_speed(srv, speed_req);
+
+ mutex_lock(&data->set_speed_mutex);
+ ret = pcie_capability_clear_and_set_word(port, PCI_EXP_LNKCTL2,
+ PCI_EXP_LNKCTL2_TLS, target_speed);
+ if (ret != PCIBIOS_SUCCESSFUL) {
+ ret = pcibios_err_to_errno(ret);
+ goto unlock;
+ }
+
+ ret = pcie_retrain_link(port, true);
+ if (ret < 0)
+ goto unlock;
+
+ /*
+ * Ensure link speed updates also with platforms that have problems
+ * with notifications
+ */
+ ret = pcie_capability_read_word(port, PCI_EXP_LNKSTA, &link_status);
+ if (ret == PCIBIOS_SUCCESSFUL)
+ pcie_update_link_speed(port->subordinate, link_status);
+
+ if (port->subordinate->cur_bus_speed != speed_req)
+ ret = -EAGAIN;
+
+unlock:
+ mutex_unlock(&data->set_speed_mutex);
+
+ return ret;
+}
+
+static int pcie_bwnotif_probe(struct pcie_device *srv)
+{
+ struct pcie_bwctrl_service_data *data;
+ struct pci_dev *port = srv->port;
+ int ret;
+
+ data = devm_kzalloc(&srv->device, sizeof(*data), GFP_KERNEL);
+ if (!data)
+ return -ENOMEM;
+
+ mutex_init(&data->set_speed_mutex);
+ set_service_data(srv, data);
+
+ ret = devm_request_threaded_irq(&srv->device, srv->irq, NULL,
+ pcie_bwnotif_irq_thread,
+ IRQF_SHARED | IRQF_ONESHOT,
+ "PCIe BW ctrl", srv);
+ if (ret)
+ return ret;
+
+ pcie_bwnotif_enable(port);
+ pci_info(port, "enabled with IRQ %d\n", srv->irq);
+
+ return 0;
+}
+
+static void pcie_bwnotif_remove(struct pcie_device *srv)
+{
+ struct pcie_bwctrl_service_data *data = get_service_data(srv);
+
+ pcie_bwnotif_disable(srv->port);
+ mutex_destroy(&data->set_speed_mutex);
+}
+
+static int pcie_bwnotif_suspend(struct pcie_device *srv)
+{
+ pcie_bwnotif_disable(srv->port);
+ return 0;
+}
+
+static int pcie_bwnotif_resume(struct pcie_device *srv)
+{
+ pcie_bwnotif_enable(srv->port);
+ return 0;
+}
+
+static struct pcie_port_service_driver pcie_bwctrl_driver = {
+ .name = "pcie_bwctrl",
+ .port_type = PCIE_ANY_PORT,
+ .service = PCIE_PORT_SERVICE_BWCTRL,
+ .probe = pcie_bwnotif_probe,
+ .suspend = pcie_bwnotif_suspend,
+ .resume = pcie_bwnotif_resume,
+ .remove = pcie_bwnotif_remove,
+};
+
+int __init pcie_bwctrl_init(void)
+{
+ return pcie_port_service_register(&pcie_bwctrl_driver);
+}
diff --git a/drivers/pci/pcie/portdrv.c b/drivers/pci/pcie/portdrv.c
index 14a4b89a3b83..e8a348949d70 100644
--- a/drivers/pci/pcie/portdrv.c
+++ b/drivers/pci/pcie/portdrv.c
@@ -68,7 +68,7 @@ static int pcie_message_numbers(struct pci_dev *dev, int mask,
*/
if (mask & (PCIE_PORT_SERVICE_PME | PCIE_PORT_SERVICE_HP |
- PCIE_PORT_SERVICE_BWNOTIF)) {
+ PCIE_PORT_SERVICE_BWCTRL)) {
pcie_capability_read_word(dev, PCI_EXP_FLAGS, ®16);
*pme = FIELD_GET(PCI_EXP_FLAGS_IRQ, reg16);
nvec = *pme + 1;
@@ -150,11 +150,11 @@ static int pcie_port_enable_irq_vec(struct pci_dev *dev, int *irqs, int mask)
/* PME, hotplug and bandwidth notification share an MSI/MSI-X vector */
if (mask & (PCIE_PORT_SERVICE_PME | PCIE_PORT_SERVICE_HP |
- PCIE_PORT_SERVICE_BWNOTIF)) {
+ PCIE_PORT_SERVICE_BWCTRL)) {
pcie_irq = pci_irq_vector(dev, pme);
irqs[PCIE_PORT_SERVICE_PME_SHIFT] = pcie_irq;
irqs[PCIE_PORT_SERVICE_HP_SHIFT] = pcie_irq;
- irqs[PCIE_PORT_SERVICE_BWNOTIF_SHIFT] = pcie_irq;
+ irqs[PCIE_PORT_SERVICE_BWCTRL_SHIFT] = pcie_irq;
}
if (mask & PCIE_PORT_SERVICE_AER)
@@ -271,7 +271,7 @@ static int get_port_device_capability(struct pci_dev *dev)
pcie_capability_read_dword(dev, PCI_EXP_LNKCAP, &linkcap);
if (linkcap & PCI_EXP_LNKCAP_LBNC)
- services |= PCIE_PORT_SERVICE_BWNOTIF;
+ services |= PCIE_PORT_SERVICE_BWCTRL;
}
return services;
@@ -829,6 +829,7 @@ static void __init pcie_init_services(void)
pcie_pme_init();
pcie_dpc_init();
pcie_hp_init();
+ pcie_bwctrl_init();
}
static int __init pcie_portdrv_init(void)
diff --git a/drivers/pci/pcie/portdrv.h b/drivers/pci/pcie/portdrv.h
index 1f3803bde7ee..9628bb04a8ff 100644
--- a/drivers/pci/pcie/portdrv.h
+++ b/drivers/pci/pcie/portdrv.h
@@ -20,8 +20,8 @@
#define PCIE_PORT_SERVICE_HP (1 << PCIE_PORT_SERVICE_HP_SHIFT)
#define PCIE_PORT_SERVICE_DPC_SHIFT 3 /* Downstream Port Containment */
#define PCIE_PORT_SERVICE_DPC (1 << PCIE_PORT_SERVICE_DPC_SHIFT)
-#define PCIE_PORT_SERVICE_BWNOTIF_SHIFT 4 /* Bandwidth notification */
-#define PCIE_PORT_SERVICE_BWNOTIF (1 << PCIE_PORT_SERVICE_BWNOTIF_SHIFT)
+#define PCIE_PORT_SERVICE_BWCTRL_SHIFT 4 /* Bandwidth Controller (notifications) */
+#define PCIE_PORT_SERVICE_BWCTRL (1 << PCIE_PORT_SERVICE_BWCTRL_SHIFT)
#define PCIE_PORT_DEVICE_MAXSERVICES 5
@@ -51,6 +51,12 @@ int pcie_dpc_init(void);
static inline int pcie_dpc_init(void) { return 0; }
#endif
+#ifdef CONFIG_PCIE_BW
+int pcie_bwctrl_init(void);
+#else
+static inline int pcie_bwctrl_init(void) { return 0; }
+#endif
+
/* Port Type */
#define PCIE_ANY_PORT (~0)
diff --git a/include/linux/pci-bwctrl.h b/include/linux/pci-bwctrl.h
new file mode 100644
index 000000000000..be51f6f2b340
--- /dev/null
+++ b/include/linux/pci-bwctrl.h
@@ -0,0 +1,17 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * PCIe bandwidth controller
+ *
+ * Copyright (C) 2023 Intel Corporation
+ */
+
+#ifndef LINUX_PCI_BWCTRL_H
+#define LINUX_PCI_BWCTRL_H
+
+#include <linux/pci.h>
+
+struct pcie_device;
+
+int pcie_bwctrl_set_current_speed(struct pcie_device *srv, enum pci_bus_speed speed_req);
+
+#endif
--
2.39.2
